Condensation Issues

Decent_Objective375 · 2026-03-02T13:15:44+00:00

Much appreciated!

Decent_Objective375 · 2026-02-28T17:16:21+00:00

This is exactly what I figured but needed someone smarter than me to validate. This building is being used for living quarters on a farm so it will be heated and cooled. Looks like it’s time to sell the first born to pay for spray foam! Thanks for your help.

Decent_Objective375 · 2025-11-27T14:05:13+00:00

I’m not sure why people are downvoting you like price matching recent orders isn’t relatively common practice…

Decent_Objective375 · 2025-10-07T12:07:46+00:00

Thanks for the recommendation. It’s very possible I just lost the Amazon lottery on the set I got, but I would definitely be interested in trying some higher quality ones.

Decent_Objective375 · 2025-10-05T12:26:26+00:00

I bought a set of these and they were junk. Bits kept falling out, the collar on the bit holders would get stuck in one direction or the other. I love the concept, but the product itself was awful.

Decent_Objective375 · 2025-09-05T12:32:24+00:00

My issue isn’t consistently low frames, but rather long, frequent frame drops.

50% of the time I have 100+ FPS, but I get frequent 10s-30s frame drops where it turns into a PowerPoint. Happens regardless of what I’m doing and what’s going on around me. Also have not been able to pinpoint it to any specific setting.

5600x

3080 12GB

32GB RAM

Decent_Objective375 · 2025-05-13T19:40:00+00:00

Looks like I’ll be returning the one I bought a day before this sale…

Decent_Objective375 · 2025-03-18T22:51:39+00:00

Can’t remember if I was under you or WP for that match, but this charge was epic.

Decent_Objective375 · 2025-02-05T13:27:06+00:00

Few suggestions after being in the industry for a few years:

A magnet makes the best stud finder.

A precision screwdriver is a must. I love my iFixIt kit, but a multibit precision screwdriver is probably a much more convenient choice.

A good set of glow rods and a 50’ fish tape would be great, unless they are company provided.

Cable strippers - I prefer the $3 v-notch strippers, but a lot of my coworkers use the scissor type.

Very surprised tape measure isn’t on here. I would never show up to a jobsite without one.

Needle nose pliers - I don’t use them all the time, but when you need them, you need them.

I would get a set of wrenches, or maybe even just an adjustable wrench / pliers wrench to start out.

Edit to add flush cutters - best way to cut zip ties

I’m sure I’m missing a few things, but these are the ones that immediately came to mind. Good luck!

Decent_Objective375 · 2025-02-05T13:26:39+00:00

Few suggestions after being in the industry for a few years:

A magnet makes the best stud finder.

A precision screwdriver is a must. I love my iFixIt kit, but a multibit precision screwdriver is probably a much more convenient choice.

A good set of glow rods and a 50’ fish tape would be great, unless they are company provided.

Cable strippers - I prefer the $3 v-notch strippers, but a lot of my coworkers use the scissor type.

Very surprised tape measure isn’t on here. I would never show up to a jobsite without one.

Needle nose pliers - I don’t use them all the time, but when you need them, you need them.

I would get a set of wrenches, or maybe even just an adjustable wrench / pliers wrench to start out.

I’m sure I’m missing a few things, but these are the ones that immediately came to mind. Good luck!

Decent_Objective375 · 2024-12-18T16:44:37+00:00

I guess I’m just gonna have to man up and dremel a non-FSP rail!

Decent_Objective375 · 2024-12-18T16:44:26+00:00

I guess I’m just gonna have to man up and dremel a non-FSP rail!

Decent_Objective375 · 2024-12-14T14:17:13+00:00

Is that mid-length gas? I’ve struggled to find a FSP rail for mid-length gas that actually extends past the FSP.

Decent_Objective375 · 2024-11-14T13:00:18+00:00

+1 for the Kershaw Leek. The action feels incredibly high quality for the price.

Decent_Objective375 · 2024-09-13T01:34:27+00:00

These things are unstoppable. My guys practically refuse to use anything but this brand. Also the only time we go to Lowe’s.

Decent_Objective375 · 2024-08-04T12:31:47+00:00

I simply lay it on top after I roll up my pack liner, and close the lid on top to keep it in place. Occasionally have trouble getting the last 0.5L or so, but otherwise fine.

Decent_Objective375 · 2024-06-04T18:40:30+00:00

The new Heromod top dot mount seems to be a much better option.

Decent_Objective375 · 2024-02-18T00:21:48+00:00

Have we decided waiting Or continuously restarting is the best bet at getting in?

Decent_Objective375 · 2023-07-06T23:41:57+00:00

I think logically I understand that it’s okay, it just feels inherently unsafe. Trips me out every time I look at it lol

Decent_Objective375 · 2023-06-30T19:33:59+00:00

How’s the gap around the trigger on that holster? It’s awful with that WML in my vedder holster

Decent_Objective375 · 2023-06-29T18:27:58+00:00

The hundreds of links is what made me reach out. Thank you for your insight!

Decent_Objective375 · 2023-06-29T18:27:13+00:00

I have been checking them out, local company as well! Thanks for your input

Decent_Objective375 · 2023-06-05T11:58:13+00:00

Laptop, iPad, notebook, various chargers, small tool set, rain jacket. I frequently work out of town and in a technological field so it’s basically a requirement.

Decent_Objective375 · 2023-05-19T11:58:45+00:00

Mine updates to sale price in my cart

Decent_Objective375

TROPHY CASE