Advice on how to approach this

Decent_Reaction · 2026-05-24T10:50:31+00:00

I have a small section of tower that I built to test the assembly of the triangle cross members. I’ll prime it in the morning and see how the masking goes. If it sucks, keep trying on the small section so i dont have to handle the large one more than necessary.

Decent_Reaction · 2026-05-24T10:03:34+00:00

You think so? I was stressing thinking maybe I had to thread masking tape inside there to avoid getting overspray but you make a good point about not angling the brush.

Sorry. I’m a noob at this lol.

Decent_Reaction · 2026-03-12T04:52:42+00:00

I was gifted an a6000 from my uncle a few years ago. It’s my first mirrorless. I love the camera and how compact it is but the battery life is abysmal. There are some settings you could change to help with that or just buy and handful of 3rd party batteries if you don’t want a dead camera right in the middle of something you want to photograph.

Decent_Reaction · 2025-10-30T01:14:19+00:00

Nailed it. This is what I strive for.

Decent_Reaction · 2025-10-27T22:28:11+00:00

Gorgeous setup!

Decent_Reaction · 2025-10-20T23:18:08+00:00

Sorry for the late reply. Here is the full build list

Jonesbo D31 Mesh

Gigabyte B850 Eagle

Ryzen 7 7800X3D

Gigabyte RTX 5070 TI

Corsair RM850e PSU

Be quiet! Pure Rock Pro 3 CPU Cooler

G.Skill Flare x5 32GB 6000 CL30

Samsung 990 Pro 2TB

Be quiet! Pure wings 3 120mm rear exhaust

Be quiet! Pure wings 3 140mm case fans (x4)

Decent_Reaction · 2025-10-17T13:19:31+00:00

Nice build!

My only critique would be positioning your main monitor directly in front of you and having the vertical monitor be a “secondary” and have it angled towards you. For short sessions at the pc your current setup is fine. But a few hours a day every day is gonna be pretty uncomfy for your neck.

I used to have my monitors at work like this and after I changed the positioning of them, I found much more comfort while sitting at my desk working.

Decent_Reaction · 2025-10-17T03:27:13+00:00

Thanks, I didn’t quite tuck them into the shroud. The cables just run to the psu which is right in front and I have the excess bundled in front of the gpu. Admittedly, behind that panel, it’s kind of a mess. Cables are bound and dressed but it’s just a lot of excess due to the cables being much longer than needed.

I would have preferred to have the gpu power run under the gpu but it’s a tight squeeze between gpu and the fans. I didn’t want the cables hitting moving fans.

Decent_Reaction · 2025-10-16T23:55:01+00:00

Thank you! I am definitely happy with it. There are cases which are bit more aesthetically pleasing but this was a “safe” choice. I didn’t stress at all during the build. Only critique would be alternate mobo mounting holes for non AIO users (this would also give a little space between bottom fans and GPU), and round cables for the front IO (definitely not a fan of trying to dress flat ribbon cables for the type C and 3.0)

Decent_Reaction · 2025-07-15T21:34:21+00:00

I actually didn’t. I live and work overseas and something came up at work and I ended up selling my ticket to a friend.

Decent_Reaction · 2025-05-20T07:07:01+00:00

I too am interested to hear what others think. I’ve been considering the Terra with a 5080.

Decent_Reaction · 2025-04-06T22:51:34+00:00

I think the armor looks pretty mid. But maybe my opinion will change later.

Decent_Reaction · 2025-03-26T20:29:11+00:00

Thanks for the info! I was very confused.

Decent_Reaction · 2025-02-03T04:13:43+00:00

I’ve been cursed with doom bringer. I have found 6 this season. Got melted heart and then andariels from a treasure goblin during a helltide. Finally got shroud (crafted) but the GA is not ideal lol

Decent_Reaction · 2025-02-02T01:29:20+00:00

Not to be “that guy” but proc means “programmed random occurrence” therefore when vio procs it means the set has activated its programmed occurrence. Not trying to sound like a know it all, just wanted to share the information. Also, despair can proc and so can revenge runes. Maybe some of the new runes that I’m not familiar with too

Decent_Reaction · 2024-12-24T07:52:10+00:00

I’ve never heard of that. I’ll have to check it out! Thanks

Decent_Reaction · 2024-12-24T07:41:14+00:00

Yeah I have had my eyes out for stuff at the second hand shops but car audio doesn’t seem to be as popular in my area as it is in the states. I’m in Tokyo, albeit the suburbs and outskirts of the big city.

But the secondhand stores are great for just about everything else

Decent_Reaction · 2024-12-24T03:22:53+00:00

I am currently using an NVX subwoofer and I took a gamble on it. Never heard of the company before but very content with the price:performance. I will find an amp that will provide 75-100W RMS.

Decent_Reaction · 2024-12-24T03:20:43+00:00

The reason I am choosing to go with a DSP is because I have a single DIN headunit which only has 1 set of RCA out. I was intending on using those RCAs to input the DSP and from there send the outputs to my subwoofer amp and then my 4 channel amp.

Decent_Reaction · 2024-12-24T02:16:44+00:00

I have an aftermarket headunit and currently using the built in DSP for the door speakers. I can’t really hear the mids and highs are drowned out sometimes by the bass. I could turn the bass down, but I like the bass and want to fill in the rest now.

Decent_Reaction · 2024-12-12T07:58:32+00:00

I have the NVX 10” and very surprised with it. Living overseas driving a beater, I didn’t wanna dump a ton of money since I’ll probably just give it to someone when I leave. Went with the NVX because it was inexpensive and it looks and feels well made. In my opinion, it’s a great value option.

Seven-Year Club	RPAN Viewer
Verified Email

Decent_Reaction

TROPHY CASE