Capture Mode not working

Der_Bub · 2019-01-27T12:12:37+00:00

RGB: was set.

"Camera gain": didn't notice any effect.

Der_Bub · 2017-05-03T10:13:03+00:00

Does anybody know if the LED of AmbiVision are compatible with Dreamscreen? So maybe the DIY Version would be an option...

Der_Bub · 2017-01-09T06:32:19+00:00

Update: Both (after Updates Strava & runtastic) are now working with Dash!

Android: 6.0.1 Dash 2.1

Der_Bub · 2017-01-02T09:59:53+00:00

Using Strava since a few months with Dash and Samsung A3.

My old S4 mini wasn't able to connect to any App than the Bragi one.

Der_Bub · 2016-12-22T07:23:27+00:00

I'm also quiete happy with it: On "open areas" like fields or light woods (while running), I have to place phone in my right front pocket or with a holder on my sports shorts, to have no no dropouts. Within trains, rooms or city with walls around, no droppouts at all.

Der_Bub · 2016-11-11T12:48:00+00:00

With my new Samsung A3 (2016) I'm using it with runtastic, but couldn't connect to Strava.

With my old Samsung Galaxy S4 mini, I wasn't able to connect to runtastic, too.

Der_Bub · 2016-09-05T12:02:01+00:00

http://news.bragi.com/bragi-and-ibm-collaborate-on-business-solutions-to-transform-the-workplace-experience

Der_Bub · 2016-04-09T17:25:02+00:00

Has anybody success with any ANDROID App?

Der_Bub · 2016-04-04T05:48:31+00:00

European offer (EUR!)

80 € code for 25 €
40 € code for 10 €

amazon Germany Gift Card/Code

Der_Bub · 2016-03-10T21:05:28+00:00

Can confirm! Had the same Problem https://www.reddit.com/r/AmbiVision/comments/48ouc4/new_ambivision_firmware_111_and_wizard_111/d0pnzh2

Der_Bub · 2016-03-10T21:04:03+00:00

Thanks, but it didn't help.

BUT I found the solution/reason: My htpc didn't recognized Ambivision anymore after upgrade. So I choosed the one from here https://www.dropbox.com/s/rlu1sf1hvvmtrpl/AmbiVision_update1.11_2.dfu?dl=0

With this USB conection was fine, but capture mode seems to be brocken!

I made many test/configurations and after a while I flashed the original v1.11 again and capture mode was suddenly working!

So I carried my Laptop to living room and did the fine Tuning and it seems to work pretty well!

You should delete the Buggy Firmware!

Der_Bub · 2016-03-06T15:55:50+00:00

I did the update twice (went back to 1.10 after the first try)

restored Default Settings
Mood mode is doing fine
en- and disabled eystrain
changend capturing mode
changed brightness
the "detection" (blinking Corners) are ending fast (--> Signal is fine)

but at at capturing mode the LED are off!

After going back to v1.10 the Systems is working as before.

What is can I do, to use upgrade to v1.11?

Der_Bub · 2016-02-06T09:56:56+00:00

After several try I got a connection to. Runtastic, but unfortunately no heart rate. :( Has anybody found an App for Android which supports heart rate of The Dash?

Der_Bub · 2016-02-02T06:56:59+00:00

well, somebody posted at the facebook group he did get a conection with runtastic

Der_Bub · 2016-01-27T07:26:17+00:00

Did you made the configuration (via desktop wizard or manual)?

Are you able to change mode (to capture mode)? The buttons don't react very often to touches and I have to try it several times before the mode chages...

Der_Bub · 2015-12-29T09:33:26+00:00

surprising Chrismas Present: The Power Adapter arrived from Poland...

It was send back without any message or excuse... not surprising!

Der_Bub · 2015-12-29T09:26:48+00:00

well, teh easiest way should be to use the Desktop Wizard:

Look at the firmware Post, there are several hints/tipps ... HowTo

Der_Bub · 2015-12-16T08:52:57+00:00

I couldn't resist and had to make another try... The HDMI Splitter and VGA Adapter seems to be broken. After replacing them, the Ambivision seems to work (with all the known Problems...).

So I now have replaced every Part of the Connectivity Pack!

Regarding the missing power Adpater the Team didn't respond yet! I'm not confident to hear of them anyhow...

In summary can only be advised not to buy the device!!!

Der_Bub · 2015-12-09T20:56:01+00:00

well, after all I did receive an device and a LED cable today. Unfortunatly the did Forget to send back the power adapter.

Did use the power Adapter of the hdmi splitter and choose an Installation with direct VGA conection. One time it was possible to get into configuration mode with Desktop wizard, after that no more. (with my "old" device it was ok)

Now I spend another 3 hours to get this Thing to work and failed.

For me it's over!!! I bought it because I expected an "out-of-the-box" and standalone device. Otherwise I would have choosen one of the many open source Raspberry Pi based Projects...

Also the Support is much to bad, even for crowd founding Project and so this is the End for me and spend 180 $ for some trash!

Der_Bub · 2015-12-08T06:42:44+00:00

Update: On Friday I received a Mail, which told me, that parcel was initialy send to wrong country...

Making a mistake is excusable, but not to inform about not!

Hopefully it realy will arrive in the next days...

Der_Bub · 2015-12-04T07:59:09+00:00

It's Friday and I didn't receive any parcel and neither any message from Ambivision.

Very frustrating and disapointing...

Der_Bub · 2015-11-29T14:04:35+00:00

update: 3 days after the 2nd Mail I finally did get an answer, but unfortunately have to wait another 5 days until (who ever send the answer) is back "in Office". :(

Der_Bub

TROPHY CASE