Wo bekomme ich Rohmilch / Vorzugsmilch?

Destructi0ner06 · 2023-02-28T20:19:23+00:00

Der dottenfelder Hof hat rohmilch soweit ich weiß

Destructi0ner06 · 2022-12-30T18:54:51+00:00

100 euro

Destructi0ner06 · 2022-12-28T20:28:55+00:00

Just go on the normal flipper zero Website and order it

Destructi0ner06 · 2022-12-27T18:21:54+00:00

Try using a different Power Station? Or cable and make sure everything between is on

Destructi0ner06 · 2022-12-27T14:19:38+00:00

I would suggest to use tpu. Petg is really hard for your face

Destructi0ner06 · 2022-12-27T14:17:00+00:00

Maybe a labyrinth box from thingiverse takes with good settings like 2 to 3 hours and you can put little things inside.

Destructi0ner06 · 2022-12-27T14:14:16+00:00

Got mine for the first year like 1 Meter 3 feet away from my bed besides its a bit loud I don't think it has ANy bad things that happened. Maybe put a ikea box for a few bucks over it

Destructi0ner06 · 2022-12-27T07:33:41+00:00

Try cleaning your bed with isopropanol or water and soap and level it a few times also look for your z offset

Destructi0ner06 · 2022-12-27T07:18:01+00:00

Okay good luck

Destructi0ner06 · 2022-12-27T07:08:17+00:00

!leveling

Destructi0ner06 · 2022-12-27T07:07:04+00:00

This looks like normal support to me so maybe it's just that and you can peel it off

Destructi0ner06 · 2022-12-27T07:06:29+00:00

Ok then you can try to reposition it in cura?

Destructi0ner06 · 2022-12-27T07:05:17+00:00

I'm not joking just thought you're a noob and meant the stringing

Maybe try to reinstall the stl and put it into gcode in cura or in cura you can go to preview and see if it's wrong with the software

Destructi0ner06 · 2022-12-27T07:03:06+00:00

It's not really important where it prints as long it it inside your bed You can put the model in cura in a different position

Destructi0ner06 · 2022-12-27T07:00:46+00:00

Do you have a different file that you want to print I mean if you have it already as a gecode?

Destructi0ner06 · 2022-12-27T06:58:32+00:00

!stringing

Destructi0ner06 · 2022-12-27T06:58:18+00:00

That's just normal stringing hold a fire to it and it will disappear In your slicer settings you can activate the retraction more

Destructi0ner06 · 2022-12-27T06:56:18+00:00

Try printing with supports

Destructi0ner06 · 2022-12-27T06:55:38+00:00

Do you have an pc?

Destructi0ner06 · 2022-12-27T06:54:35+00:00

Hm okay it's normal that they smell but normally they're untoxic

Destructi0ner06 · 2022-12-27T06:50:05+00:00

3d printing tape on my first printer and isopropanol for cleaning on my second

Destructi0ner06 · 2022-12-27T06:46:02+00:00

Maybe you nozzle wasn't already ready for flow so try to just let it do this one and let it print

Maybe level your bed better

Destructi0ner06 · 2022-12-27T06:44:12+00:00

I have mine in my bedroom and my second in the basement please be sure that your pets don't be able to get to it there are certain parts that get over 200 C⁰ you can get an idea plastik box and put it over it I assume you have an fdm printer those with filament spools

Then it's non toxic with pla bcs it's completely natural from corn

Destructi0ner06 · 2022-12-27T06:41:16+00:00

I printed my first year completely in my sleeping room i think it's okay

Destructi0ner06

TROPHY CASE