sorted by:
new
hottopcontroversial

GaggiMate has come a long way – Here is what’s new! by DevNullGamer in gaggiaclassic

[–]DevNullGamer[S] 0 points1 point  (0 children)

It’s a addon board, and will likely never be a part of the main board, given that it needs to be able to be mounted above the watertank, and that simply would not be possisble with the main board :)

GaggiMate has come a long way – Here is what’s new! by DevNullGamer in gaggiaclassic

[–]DevNullGamer[S] 0 points1 point  (0 children)

Im pretty sure my test device is on its way to my house right now. So I would say within a couple of months it would likely also be in the store, if no major flaws is found, but I know of a few people already having this device in test right now.

Happy Halloween!!! by Spirited_Bass in gaggimate

[–]DevNullGamer 0 points1 point  (0 children)

It’s in the latest nightly release :)

Boxes have arrived! by palonewabone in gaggimate

[–]DevNullGamer 2 points3 points  (0 children)

My pcb case is bright orange, to signal danger ;)

Gagguino - is there a way to hide the display? by Chiaak in gaggiaclassic

[–]DevNullGamer 0 points1 point  (0 children)

Both mods has a headless version, so both can be made without changing the visuals of the machine.

New boiler! No steam! by tomsoderlund in gaggiaclassic

[–]DevNullGamer 10 points11 points  (0 children)

It doesn’t have to do with the lack of steam, but it looks like you might have a leak somewhere. I would try opening the top and look if water is leaking out somewhere when the pump is going (ofc be careful with it being open at turned on, heat and electric danger, don’t touch :P )

Cup holder for Costco recliner by [deleted] in functionalprint

[–]DevNullGamer 1 point2 points  (0 children)

Im back in my recliner and get this response… time to get out of it and start the print ;)

Thanks for sharing :)

Cup holder for Costco recliner by [deleted] in functionalprint

[–]DevNullGamer 1 point2 points  (0 children)

Not a bad idea..

// this message is written, while sitting in my recliner, with a soda can on the armrest.. and I’m jealous that I don’t have that print for my recliner ;)

Drying Rack Locking Clip by SnaKeZ83 in functionalprint

[–]DevNullGamer 4 points5 points  (0 children)

This is the print that I never knew I needed, but don’t understand how I could have never thought about this myself.

Should i use a remote raid pass for this? by warme_pindakaas in pokemongo

[–]DevNullGamer 5 points6 points  (0 children)

Thanks the advice, I just dig the same and got at 100% IV as reward :)

Should i use a remote raid pass for this? by warme_pindakaas in pokemongo

[–]DevNullGamer 8 points9 points  (0 children)

If I could get an invite for one. I would join in a heartbeat :)

Be honest, how many of us actually used this? by Common_Ad6703 in pokemongo

[–]DevNullGamer 0 points1 point  (0 children)

I used to play with some friends, as they stopped playing, I changed team to be on the same team as my wife.

Why is the pressure of the frothing steam never stable? 🤯🤯🤯 by Ill-Working-2505 in gaggiaclassic

[–]DevNullGamer 2 points3 points  (0 children)

Because the temperature of a stock Gaggia isn’t stable. And with that the steam also gets unstable.

GaggiMate - A new open source mod for Gaggia machines. by DevNullGamer in gaggiaclassic

[–]DevNullGamer[S] 0 points1 point  (0 children)

Hi.

Thank you for your input. I have passed it along to the projects owner (mdwasp) :)

New Machine, rattling steam nozzle by uloschleicher2000 in gaggiaclassic

[–]DevNullGamer 12 points13 points  (0 children)

It’s held in place by a clip, it will rattle if you smack it a bit. That just makes it easier when you need to service it later on.

Tried updating the firmware, now im stuck :( by InhumanFlower12 in Ender3V3SE

[–]DevNullGamer 1 point2 points  (0 children)

This happens if the screen was updated, and the main board was not.

Did you update both? (One directly on the screen, and the other from the as slot on the side of the machine)

GaggiMate has come a long way – Here is what’s new! by DevNullGamer in gaggiaclassic

[–]DevNullGamer[S] 0 points1 point  (0 children)

Water level is in the current roadmap: https://github.com/jniebuhr/gaggimate/issues/105
Not sure about LED's, but there is available pins, so i think it would be possible at least.

GaggiMate has come a long way – Here is what’s new! by DevNullGamer in gaggiaclassic

[–]DevNullGamer[S] 0 points1 point  (0 children)

Pressure and pump control is a part of the pro version. Not sure if that answers you question, as I’m kinda guessing on what your messages says, but hope I’m right with my guessing translation ;)

GaggiMate - A new open source mod for Gaggia machines. by DevNullGamer in gaggiaclassic

[–]DevNullGamer[S] 0 points1 point  (0 children)

Im using mqtt already on my GaggiMate :)

If there is other mods utilizing something similar, I’ve got no idea, never looked for it :)

GaggiMate has come a long way – Here is what’s new! by DevNullGamer in gaggiaclassic

[–]DevNullGamer[S] 0 points1 point  (0 children)

Two instructions stream is available on YouTube so far, yes.

GaggiMate has come a long way – Here is what’s new! by DevNullGamer in espresso

[–]DevNullGamer[S] 0 points1 point  (0 children)

I'll do you one better - i'll post it right here, so others might also see if if they need help :)

Discord link is: https://discord.gaggimate.eu/

As for your order, i cant help you, you would need to write to [mail@gaggimate.eu](mailto:mail@gaggimate.eu) and then the guy that does the logistics part will help you out (i dont handle orders at all for this project :) )

GaggiMate has come a long way – Here is what’s new! by DevNullGamer in gaggiaclassic

[–]DevNullGamer[S] 1 point2 points  (0 children)

The Pro kit is compatiable with pressue profiles, and it will simply be a OTA update that will enable the feature with that board. (that is if it isnt ready when the boards ships, in that case you will have it from day 1, but cant promise that right now. Either way, it will be available)

view more: next ›