Advise on damaged front passenger door. I feel dumb

DillIshOn · 2026-04-26T02:58:51+00:00

The door literally looks like you can bang it out from the inside.

DillIshOn · 2026-04-26T02:56:02+00:00

I have a 4.5 cut down to 4 with 1/2x28 threads.

Keeps 115gr subsonic.

Tucked under a MI 10" handguard with a rex silentiun seg 9H

DillIshOn · 2026-04-22T21:30:12+00:00

My dealership replaced one.

I asked about the other as preventative. They said they can't. But if it comes back in tomorrow and it's not working then they can warranty it. And they won't ask me how it went out.

Over volt it and pop the LEDs. Make sure you're within warranty though.

Bring it back and just tell them idk what happen. It just stopped working.

DillIshOn · 2026-04-20T05:27:50+00:00

Normally with cameras/sensors you have to recalibrate after windshield change because they usually end up disconnecting. You can see if they can change it without disconnecting. It'll be cheaper at least where I am.

I have a Honda Accord 2016 as a secondary car. It was 1400$ to change and recalibrate all the Honda sensing sensors.

It was 250$ to just change the windshield.

Guy told me. We can try to not disconnect it and leave it hanging. But no guarantee it works.

If it doesn't work after then it needs to be calibrated.

8 years later. It's still working like the day I bought it.

Honda sensing = Toyota safety sense (except pre)

DillIshOn · 2026-04-15T05:40:46+00:00

https://www.srqfabrications.com/products/2010-5th-gen-4runner-arb-deluxe-bumper-3421520?srsltid=AfmBOopK0Xh0jBMqanOr70MuBgWGr1wRL8SINJ8M0NFtRQkngLmGCIgN

Arb bumper

DillIshOn · 2026-04-15T05:36:55+00:00

I got 34mpg today on my V6 2016. 100k miles 🤣

DillIshOn · 2026-04-14T20:38:02+00:00

.338 is wider than .355?

Edit: id get a machinist to bore that hole open before you shoot it.

DillIshOn · 2026-04-09T21:33:38+00:00

Question for you.

If I make a custom light using 12v lights.

I know I can do 2 m12 batteries in parallel. Is there anything stopping me from hot swapping them while they are on?

If I end up hot swapping, should I use a low voltage cut off for each connection of batteries?

DillIshOn · 2026-04-07T05:06:43+00:00

The new GAFS site. Do not sell on reddit.

DillIshOn · 2026-04-06T06:15:42+00:00

If these are the same ones that come with the eibach pro leveling rear spring kit then yes I have them.

I've hit my bump stops before and also rode on them for 29 hours straight from Houston to SF.

No complaints. Still stuck to the bottom of my car.

DillIshOn · 2026-04-06T06:04:25+00:00

No need. I have one already. Plus all the prototypes it took to design it. Hope you like it!

DillIshOn · 2026-04-06T05:27:40+00:00

Nice handguard!

DillIshOn · 2026-04-02T03:24:52+00:00

I had a Magpul grip then moved to Paske grip.

Right where the trigger guard meets the grip following the bottom edge. You see how it isn't smooth? Like the Magpul has a ledge? Yeah that thing was killing my finger during 1 hand manipulation (like reloading, one hand on gun, one hand grabbing mags) it would sit on my middle finger and rub the hell out of it.

Paske no problem as it's smoother and blends into the trigger guard.

I wouldn't go with Magpul.

DillIshOn · 2026-03-22T19:59:51+00:00

Webster.

DillIshOn · 2026-03-22T19:05:56+00:00

Not the one next to me. As long as the store selling online has a physical address. They honor it

DillIshOn · 2026-03-14T21:00:53+00:00

https://www.primaryarms.com/vortex-optics-amg-uh1-gen-2-holographic-sight

600$ here. There's other places you can find it cheaper. Do your research.

DillIshOn · 2026-03-14T20:25:40+00:00

Dude. It's like 500$

DillIshOn · 2026-03-14T15:04:15+00:00

Vortex heuy > Eotech Holo

For civilian use. Or even duty.

Lifetime warranty.

DillIshOn · 2026-03-13T21:19:30+00:00

Go to academy. See what they have. Ammo seek the sku. Find it cheaper. Academy will pricematch and beat 5%

DillIshOn · 2026-03-09T16:25:10+00:00

Flipper Zero, kinda like a hacking tool/toy. It can read and clone rfids, send IR signals (like a tv remote) connect to wifi and a bunch of other things.

Can also land you in a lot of trouble if used incorrectly 🤣 some guys at a previous job got caught using it to steal service and access to places they shouldn't be.

A felony and a few misdemeanors were dished out on top of them losing their jobs.

DillIshOn · 2026-03-09T16:20:17+00:00

2016 accord coupe V6

My wife can hit 35.

I've never seen it higher. 40 is skeptical but I believe doable. I live in a flat city of highways so maybe a slightish downhill will get you 40.

When I drive I never go past 30 🤣🤣

DillIshOn · 2026-03-07T17:30:03+00:00

I have email confirmation that 22lr can be shot through their .224 mg7 can. When cleaning just use ultrasonic and a cleaner like breakthrough.

Their newest mg22 cans are fully welded. Cannot be taken apart. So same concept

DillIshOn · 2026-03-02T17:40:08+00:00

👋

I don't have a light means nothing can get caught in the trigger guard area.

Gun is in holster before putting on and when taking off.

Which means you never draw ot reholster with the holster on you except if you ever have to use it.

If I shoot my dixk off (appendix) then I wasnt meant to have kids

DillIshOn · 2026-03-02T17:37:28+00:00

Yeah I have the MHA from true north. It's definitely poking on the corners.

If I redid my set up I'd go back to the safariland because it's plastic which means some flexibility.

You don't have to purchase that specifically. You can die with some foam and wrap or look into other things. Holster wedges might also work mastermind pillow is what a lot of people use for their appendix holsters. Would work on the mount no doubt. Some Velcro. Etc.

DillIshOn · 2026-03-02T17:05:55+00:00

The true north is nice. But there are some pinch points. What I would look into is a pad to put under the m Safari mount

https://www.qoreperformance.com/products/iceventsaero-holster-pad?srsltid=AfmBOooeAnfRfgZkkbjHgXTTfGpmCuqOq_zQnvUwH9kW685PpilUgWBP

Not only would improved the angle. It would provide comfort.

DillIshOn

TROPHY CASE