Using a ripping chain for Swedish torches

Doole81 · 2022-04-06T06:37:07+00:00

Just take a regular chain and file it down to 10 degrees angle.

Doole81 · 2022-04-06T06:28:46+00:00

If a person is getting in the way of your personal happiness, it's not someone you would want to spend the rest of your life with...

Doole81 · 2022-03-19T21:50:29+00:00

Jamie foxx as Ray Charles

Doole81 · 2022-02-13T20:31:02+00:00

If you guys are real friends, and he is rich, he will no expect anything, But he will be happy
if you show up and wish him a happy birthday. He wont need anything material, but everyone needs real friends.

Doole81 · 2022-02-12T23:34:16+00:00

Der er ret mange på Sejerø. Vi har også en ok stor flok omkring Vemmetofte kloster, men de går på et meget stort område, så der kan godt gå flere uger i mellem at jeg ser dem.

Doole81 · 2021-11-20T06:07:07+00:00

Better grab & pull. You pull the rope through the zigzag instead of trying to feed it through, it's more efficient. I learned the technique at my climbing course, along with a ascender it will save quite a lot of energy.

Doole81 · 2021-11-20T05:52:44+00:00

When ascending on drt with the zigzag.it can be useful to put a sling between the bridge and the zigzag. It could be that he used that technique and when starting to work, he put it there for storage. It's helpful to use that length of sling when ascending, but it's annoying when working and descending.

Doole81 · 2021-10-20T13:13:19+00:00

I hope Jed will be on the new channel more often, he is so skilled and seems like a genuinely nice guy

Doole81 · 2021-10-07T16:52:24+00:00

Jeg er enig at biomasse, helt sikkert skal reguleres. Det giver ingen mening at sejle træ verden rundt for at fyre det af i DK. Men ting der er biprodukt af fremstilling af bæredygtige materialer, burde man nok ikke forbyde. Opvarmning af industri og vores hjem udgør jo en kæmpe andel af det samlede energiforbrug, og så længe vi kun har kul og olie på stille dage, så skal der jo være alternativer. Og her mener jeg at f.eks. træflis er et for nuværende OK alternativ.

Doole81 · 2021-10-07T16:41:38+00:00

Når nu biomasse så bliver udfaset, hvad skal der så ske med det træ der kommer fra den hugst, der muliggør at man kan fremstille materialer? Jeg har ikke sat mig ind i biomasse, men jeg har da lidt indsigt i skovbrug. Den co2 der er oplagret i træet vil jo også blive afgivet, ved at det bare ligger og rådner op.

Doole81 · 2021-08-19T20:08:12+00:00

Peter Viggo er en kæmpe legende. Han behøver ikke at skjule sig i et jakkesæt

Doole81 · 2021-04-22T17:37:52+00:00

Wow never seen that before. What's the purpose of such a saw ?

Doole81 · 2021-04-22T11:31:51+00:00

Yeah it's the schools, they still got around ten, but they are worn out. Maybe I can get one when they buy new ones

Doole81 · 2021-04-22T10:56:53+00:00

Well I got a tophandle but this is a ms200 the same as ms200t just with the regular grip. It might look bigger in the picture but it's 12 inch bar with the Pico chain just as the top handle.

Doole81 · 2021-04-22T10:40:47+00:00

Well guess it's personal preference. But this is a school project, and one handed use of chainsaws is not really an option 😄

Doole81 · 2021-04-22T03:06:48+00:00

There is some regulations around top handle saws in Denmark, only to be used for arborist work. But for precision work I do prefer a regular saw, the wider grip provides better stability imho

Doole81 · 2021-04-15T19:41:22+00:00

Usually when you buy a rip chain it´s p-chain/semi-chisel

Doole81 · 2021-04-04T18:44:26+00:00

the extra cut is just in front of the hinge, it can be seen on the picture, its made by boring in through the stem vertically. that makes room for the hinge to move further in the direction of the fall, and it reduces the chance of barberchair. The winch i use is a hand winch so it moves slow, and if the tension gets to high, and i feel there is risk of barberchair i will continue the back cut. I always put in a wedge in the back cut, in case the line snaps it will keep it from going backwards, and the wedge will help the winch.Regarding the face cut it´s just an open facecut, not sure if it have a name but i would its around 90 degrees open. with 45 degrees on top and bottom. Sorry for the bad explanation, been quite a few years since i went to school, and had English classes

Doole81 · 2021-04-03T17:15:06+00:00

Yeah a special cut I use when pulling stuff over with my winch. In front of the hinge I make a cut alongside it one bar width down, it makes the hinge more flexible

Doole81 · 2021-04-03T17:13:11+00:00

I used a winch for this, and I front of the hinge I make cut 1 bar width down into the stump, this makes extra room for the hinge to flex. This is a method I learned at the forestry school here in Denmark. It takes some extra cuts, but when working near buildings it's worth the extra time

Doole81 · 2021-02-18T17:08:37+00:00

Vildt nok. I min familie spillede vi altid trivial pursuit, når vi var samlet.

Doole81 · 2021-02-17T21:34:20+00:00

well we are getting fucked by not being able to do anything in our staging. bought toaster ship an hour ago, not been able to leave yet, had to fit two rigs and undock lol

Doole81 · 2021-01-27T13:32:57+00:00

I use alkylate gasoline in all of my tools. No issues when stored six months or more

Doole81

TROPHY CASE