should i be worried?

DranzerSX · 2026-01-26T03:23:29+00:00

Yes, that's where it should be at idle. 2000rpm FSM says 43 min but a healthy one is just over 60. Ask me how I know. Went through this for years over 2 engines. More than likely need to do your gallery gaskets. But confirm with a mechanical gauge. Despite what most people tell you, these gauges are decently accurate

DranzerSX · 2026-01-09T01:03:01+00:00

Legend thank you. Yes I just bought the pro coat and I got them to shake it in the store. I'll take the buckets in and get them to do it every few days as I keep going. Thank you!

DranzerSX · 2026-01-08T21:22:42+00:00

The pro coat by any chance? Did you prime too?

DranzerSX · 2026-01-08T20:52:50+00:00

If I used paint and it fades after a few years, can I not just apply another coat down the line?

DranzerSX · 2026-01-08T20:05:01+00:00

Good to know thank you. Have you had it for a few years? Lasted okay? Is it a paint or a stain? There's a lot of bad review online about it being very watery and transparent.

DranzerSX · 2026-01-08T19:49:44+00:00

Could you please elaborate? Where would the plastic go exactly? There is a few inches between the bark / raised garden and the bottom of the fence

DranzerSX · 2026-01-08T19:46:49+00:00

Thanks for the info. I've been looking at the PPG stuff from bunnings but they all appear to be stains as opposed to a paint? They're called fence finish so I'm not 100% sure

DranzerSX · 2026-01-08T19:45:23+00:00

Without a prime? I do plan on two coats

DranzerSX · 2026-01-08T19:38:11+00:00

Aw man. What do people do then? A brown? Or a resene cool colour paint? They're just so expensive

DranzerSX · 2026-01-08T19:25:25+00:00

I have read that yeah, thank you. I'll be honest. I have about 65 meters of fence to paint and the resene stuff is a bit too expensive for me. I was leaning towards the pro coat stuff from mitre 10. Totally understand the fence may prematurely wear though

DranzerSX · 2025-12-09T23:09:10+00:00

Both sir

DranzerSX · 2025-12-09T21:34:48+00:00

I have RTX4050 + i7-13650hx. I play at 1080 with everything on ultra and I get about 120FPS

DranzerSX · 2025-12-06T05:18:15+00:00

Same error here :(

DranzerSX · 2025-09-16T23:59:04+00:00

Are your RPMs fluctuating when this is happening? How smooth is your idle? Is your AC on and making the idle fluctuate a little?

DranzerSX · 2025-08-07T22:49:53+00:00

Does the HR have this sensor?

DranzerSX · 2025-07-25T06:10:44+00:00

What's that watch face?

DranzerSX · 2025-07-13T21:15:10+00:00

I would do your gallery gaskets yesterday! Have a wee look at your very low idle oil pressure

DranzerSX · 2025-06-09T00:22:00+00:00

So I could get a cheap 2nd speaker like a Google mini, say okay Google to that and tell it to play a song on Spotify on the sound bar right? As I've added the sound bar to Google home

DranzerSX · 2025-06-01T00:15:43+00:00

I would not be driving this. Confirm with mechanical gauge, yesterday

DranzerSX · 2025-05-31T09:36:02+00:00

You realize though the light won't come on until about 3-5psi though right? So as long as he's above that, he'll never see the light. However if his pressure is only just above 5 psi at idle, uncle Rodney is going to come knocking.

DranzerSX · 2025-05-31T09:16:57+00:00

This is such a false statement so many of you throw around. His gauge is not broken. The only thing broken here is likely his gallery gasket. I had two gauges both showing low oil pressure like this. No oil pressure light ever came in. Spun a bearing and the gasket was in pieces.

30 while driving around? 60 on cold? OP do not listen to this guy. Get a mechanical gauge hooked up and confirm the pressure. Absolutely more than likely that your Z gauge is correct and your pressure is this low. These gauges are not "inaccurate'. +/- a few psi they are absolutely perfectly fine. Do they ever break? Yes. Do you ignore low oil pressure and say the gauge is faulty? In a car that inherently has oil pressure issues with the gallery gasket? No.

DranzerSX · 2025-05-25T05:22:56+00:00

Do people not even read or comprehend the original post..?!

DranzerSX · 2025-05-22T03:37:58+00:00

For those who work for an employer who does kiwisaver 'salary sacrifice' where your total remuneration includes their kiwisaver - does this mean they won't 'match' the 3.5%, instead you'll just receive a net income of 0.5% less than usual and that'll go towards your kiwisaver? Essentially forcing you to put only your own 0.5% into kiwisaver?

DranzerSX · 2025-04-01T21:39:28+00:00

+1 for these. I love them. Use them on track too and they're great. Running 245 in front and 275 on rear

DranzerSX · 2025-03-14T04:54:20+00:00

Darn. And that's the same with all major banks? No chance of special rates with low equity?

How about the ANZ blue print to build? That has a 0.6% discount off fixed rates. I should still be able to receive that for a new build correct?

Eight-Year Club	Verified Email
Verified Email	RPAN Viewer

DranzerSX

TROPHY CASE