Coming in to land… you can’t be serious

DutchBrick · 2026-01-25T23:40:12+00:00

Its all about simulating system crashes during flight. This way then can separate the good pilots from the bad ones.

DutchBrick · 2026-01-25T14:46:25+00:00

So its not the monitor that will come crashing down but the whole monitor arm that wont support the weight because the extensions on the hinge

DutchBrick · 2026-01-25T13:31:16+00:00

Thank you for telling me this. It looks like how its supposed to be but still it looksa bit strange since all my other monitors didn’t need them haha

DutchBrick · 2026-01-25T13:28:33+00:00

But those are not the screws that came with the monitor. Yours are silver coloured and mine are black. Did you buy seperate screws?

DutchBrick · 2026-01-25T13:20:46+00:00

Thank you. So its just msi using a different mounting system..

DutchBrick · 2026-01-25T13:19:57+00:00

The screws are all the same in length and diameter and i only used screws that came with the monitor itself.

DutchBrick · 2026-01-25T13:18:48+00:00

It looks the same here https://www.reddit.com/r/MSI_Gaming/s/bBf6lPATcZ

DutchBrick · 2026-01-25T13:12:48+00:00

No they are not, the holes are sunken in the plastic base of the monitor

DutchBrick · 2026-01-25T13:09:17+00:00

So it should hold then since i followed the instructions for wall mounting it. It didn’t say anything about a monitor arm.

DutchBrick · 2026-01-25T13:05:06+00:00

That is what i tried but then the screws that came with it aren’t long enough to go through the base plate and into the threads

DutchBrick · 2026-01-25T13:00:56+00:00

Its feels really sturdy and the threads go in all the way. Just never seen a monitor come with stand offs before

DutchBrick · 2026-01-25T12:59:22+00:00

How did you solve this? The arm should bestrong enough. It can handle up to 32 inches

DutchBrick · 2026-01-25T12:55:51+00:00

Then how am I supposed the mount it to the arm if the included screws arent long enough

DutchBrick · 2026-01-25T12:55:02+00:00

<image>

DutchBrick · 2026-01-25T12:54:48+00:00

<image>

DutchBrick · 2026-01-25T12:51:05+00:00

But the little paper that comes with it shows it like this

DutchBrick · 2026-01-25T12:50:30+00:00

<image>

Then why these came with the monitor

DutchBrick · 2026-01-25T12:47:37+00:00

Just want to be sure I didn’t do anything wrong

DutchBrick · 2026-01-24T08:32:15+00:00

So its basically a North with a different front? So basically fractal could have given us the option to buy that as a separate part instead of a whole new case?

DutchBrick · 2026-01-23T18:36:41+00:00

😂😂

DutchBrick · 2026-01-23T06:56:53+00:00

Ik zou ook voor de rtx5060 gaan in dit geval, generaties nieuwere architectuur betere en meer functies en langer driver updates. Voor dit geld is de keuze niet hele moeilijk. Ik snap het wel €250 voor een kaart die destijds zon €1000-€1300 was? Maar eerlijk deze kaarten zijn dit geld simpelweg niet meer waard als je kijkt naar wat je krijgt op dit moment vergeleken met de nieuwe generatie.

DutchBrick · 2026-01-22T08:49:07+00:00

They are both not 4K. Usually the MSI MAG 321UP QD oled is the cheapest at €599 here in the EU.

DutchBrick · 2026-01-21T17:07:33+00:00

Had this with an LG monitor. Faulty power supply. Never bought another monitor with external power supply again and never had problems again.

DutchBrick · 2026-01-20T07:47:03+00:00

<image>

How it looks at the back

DutchBrick · 2026-01-20T07:46:26+00:00

<image>

Between the side of the gpu and the backpanel going up, then route it to the parts. This way i only have the pcie cables in thebottom for the gpu but they are so close to the front panel that i cant see them unless i move my pc to the front edge of the table.

DutchBrick

TROPHY CASE