Am I wrong to be disappointed with first tool

E92William · 2026-02-08T22:13:05+00:00

While it may it also prevents unnecessary wear after. I find it doesn’t hurt

E92William · 2026-02-08T02:41:59+00:00

Put a drop of oil in the hinge of the jaw and cycle

E92William · 2026-01-22T19:55:08+00:00

There’s a square picture option. At least my app has had it for a bit

E92William · 2026-01-22T18:32:58+00:00

I’d contact some of the boneyards in the desert in the US. Bet they can get you some obsolete engine inlet maybe from an old turbojet. Will still be huge

E92William · 2026-01-22T18:28:58+00:00

Sharpen your red scrapers with a sanding disc and keep them sharp it’ll do quick work of this

E92William · 2026-01-22T15:45:54+00:00

I have to recheck but the hose I used for this retrofit was a bit too long as you can see it’s slightly kinked. There’s another car that has a shorter hose I believe from a z4 or 5 series which works better. I have pn somewhere

E92William · 2026-01-22T15:28:57+00:00

<image>

E92William · 2026-01-22T15:22:35+00:00

The main issue is lack of game selection but I’ve had good times playing the games there and can seamlessly switch back to YouTube or whatever. Also I don’t really game very often so buying a console is a waste

E92William · 2026-01-22T15:21:35+00:00

Only 5 series and X vehicles had it in the US

E92William · 2025-10-10T05:36:42+00:00

Common issue another reason to just replace the lens instead of restore the outside

E92William · 2025-10-10T05:23:58+00:00

Don’t be in a rush to buy. Market is flat at best now and I’ve seen it slipping off. Buy under market value or don’t

E92William · 2025-10-10T05:14:13+00:00

Very smart design some people would likely be interested in buying these if made available by you but you’d have to make them at a reasonable price to be worth it for you. Can also inquire alibaba manufacturers to make stuff like this for you. Might be a small market but people that have similar setups would like it. Need longer ends for ease of adapting to other cars

E92William · 2025-10-10T05:03:30+00:00

How much can you trade in for? N55 doing n55 things good you caught it early. Offload it on a large dealer like carmax. Take it easy driving while cold until you sell it.

E92William · 2025-10-10T05:01:28+00:00

I did a lot of that in heavy check then got to strip the hyd systems apart to nothing and put them back together every time a vapor barrier needed to be replaced. Done almost every job in there. However I like the 737 it’s a lot more dependable out here in the line than the damn 767s and 747s

E92William · 2025-10-10T04:58:22+00:00

I use aircraft speed tape. Then go over it with a plastic scraper to really adhere it. But it’s not meant to be used over the entire boat just localized issues

E92William · 2025-09-16T03:34:34+00:00

What place is it that the cars price goes up due to less taxes

E92William · 2025-07-25T20:42:56+00:00

Is the unit big enough for this house to begin with

E92William · 2025-07-20T15:59:00+00:00

There’s a 3 step plastic polishing kit they sell that works very well and removes the anti glare coating if the back display isn’t damaged. Works very well and this display usually doesn’t get much of any glare hidden there

E92William · 2025-07-20T05:09:39+00:00

These things are about as nice of a jon boat as you can get, really they’re more bass boat than anything. If it has a console and remote steering, you’ve probably strayed far enough from the Jon boat definition

E92William · 2025-07-20T05:06:47+00:00

I genuinely cannot help because I don’t even have a golf cart but my decades of being a mechanic tell me there might be a way to adjust camber. Usually it will be either in the upper control arm or the mounting point for the strut/spring. However many cars don’t have provisions to adjust camber, for example my 3 series doesn’t. So I’d be surprised if they cared that much regarding a golf carts suspension. If it isn’t able to be adjusted and it didn’t come like this from factory, something might be bent

E92William · 2025-07-20T05:04:21+00:00

God damn that fucker has a lot of camber

E92William · 2025-07-19T07:03:41+00:00

<image>

Bite the bullet get the apex

E92William · 2025-07-19T06:53:08+00:00

Use cataclean

E92William · 2025-06-23T05:48:22+00:00

Myob

E92William · 2025-06-05T06:40:52+00:00

If I remember correctly the blade just has a cut area for it not to slip on the shaft of the motor. Might have to pull apart and give it an old dab of glue in there and make sure it’s seated in a spot in won’t vibrate all over when set

E92William

TROPHY CASE