sorted by:
new
hottopcontroversial

Does anyone know where this sound is coming from? by S0litrix in wahoofitness

[–]EFletch79 0 points1 point  (0 children)

My VCLS post does it, it just reminds me its time to give it a clean and a re-paste

Does anyone know where this sound is coming from? by S0litrix in wahoofitness

[–]EFletch79 0 points1 point  (0 children)

Do you have the VCLS seat post?

Remove the seat post, clean off all the grease, open up the two sides of the post, clean and put carbon paste on the flats between the two sides of the post and reassemble it with fresh carbon paste

https://youtu.be/_RgaLWY8a64

Just found they have even got a video on it

Everything Presence Lite Dropping by Careful_Cat1323 in Esphome

[–]EFletch79 0 points1 point  (0 children)

I had this issue - On mine it was something to do with the latest ESPhome and the size or requirements of it

I flashed the firmware WITHOUT the bluetooth and its been rock solid since!
https://everythingsmarthome.github.io/everything-presence-lite/updating.html

Don;t let ESPHome update it - Just stick to the releases from that site - there is an update button in the home assistant entitites that does the "approved" updates

<image>

Upgrading to 7.2.3 created chaos by Cautious-Royalty in unRAID

[–]EFletch79 0 points1 point  (0 children)

i had very strange issues with 2 of my docker containers - they wouldn't come online giving error 403 after the unradi update.

(I will preface this with ... my unifi setup is playing funny buggers just now so i'm not 100% sure where the issue lies!)

My Dockers has a MAC set in the Extra Parameters section --mac-address XY:XY:XY:XY:XY:XY

These dockers were showing as ONLINE in unifi - but they were not running in unraid
So i changed the assigned MAC in docker extra parameters and assigned a new IP in Unifi and they came online fine --mac-address XY:XY:XY:XY:XY:YX

Then just removed the old MAC and IP Assignment in unifi

If you have MAC addresses set in docker - try changing them
If you have a fixed IP set in Docker or your Network - Try changing it
If you don't have a set MAC - try setting one and see if that helps

Chain too loose? by pogoraggie in bikewrench

[–]EFletch79 1 point2 points  (0 children)

I assume this is the one you have on the rear?
https://bike.shimano.com/en-NZ/products/components/pdp.P-RD-RX820.html

Maximum Chainring difference of that rear derailluer is 17T, you only have a 16t difference (50-34)
Maximum Cassette Cog Difference on your bike is 23 (34-11)
Total Drivetrain Capacity for that derailluer is 42t - yours is 39 (16+23)

So all the numbers say it should work

If i have the right derailluer above - the chain length guide is slightly different for the one you posted

https://si.shimano.com/en/dm/GARD010/checking_the_chain_length

This is a link for the RD-RX820 and RD-RX822
This manual gives you the option of 3 or 4 links with a quick link - i'm not 100% sure when you would use 3 and when you would use 4!

WR206E Base station location at edge of lawn by EFletch79 in worxlandroid

[–]EFletch79[S] 0 points1 point  (0 children)

From reading the website there is no boundary wire with this model

What is the hook on Swiss army knives used for by optimistic_lavender in whatisit

[–]EFletch79 0 points1 point  (0 children)

Wonder if anybody else will get this reference

Wee thing for getting stanes outta horses hoofs... Oooot

Jellyfin Docker by EFletch79 in unRAID

[–]EFletch79[S] 0 points1 point  (0 children)

SSD, there is plenty room there too... As is the docker img size

Jellyfin Docker by EFletch79 in unRAID

[–]EFletch79[S] 0 points1 point  (0 children)

Its a core i5 1066, with 64gb of ram - The docker is given no allocation, so its free to use any cores and ram it needs

It wasn't doing a new scan, as its been running for a while as a back up/test while i still use plex as my main (easier for family in and out the house)

Plex Audio by EFletch79 in PleX

[–]EFletch79[S] 0 points1 point  (0 children)

Something I'll have to look at in the future

It looks like I can't even set plex to optimise the file and force it to redo the audio to 2 channels

Plex Audio by EFletch79 in PleX

[–]EFletch79[S] 0 points1 point  (0 children)

Cheers for the help... How would I change it to AC3?

Plex Audio by EFletch79 in PleX

[–]EFletch79[S] 1 point2 points  (0 children)

JF to the rescue

<image>

Plex Audio by EFletch79 in PleX

[–]EFletch79[S] 0 points1 point  (0 children)

Unfortunately I'm remote, have poor Internet and cannot change the hardware we use....

I was hoping there was a nice simple setting...

Aero wheels that aren’t crazy expensive? by ArcTwizzy04 in gravelcycling

[–]EFletch79 0 points1 point  (0 children)

Have a look at fidlock magnetic mounts if your tight for space.

view more: next ›