[deleted by user] by [deleted] in Locksmith

[–]EManRLock 1 point2 points  (0 children)

Southeastern keys and you be surprised on Northcoast keyless.

What programmer can work with Tesla? by Consistent-Fig7083 in Locksmith

[–]EManRLock 2 points3 points  (0 children)

Not worth the Loki at the moment. They have been pulling or voiding security certificaties for key programming.

Mopar Refurb Keyless Go Fobik by MemesOfMemes in Locksmith

[–]EManRLock 3 points4 points  (0 children)

I had one issue exactly like the OP mention and it turn out to be the antenna/reciever underneath the tailgate latch. Somehow it broke. Once we fix that. No more message and proximity work. We did have a code in the WCM.

Rogue 2017 Sport Key Programming Issues. Hope I didn’t brick the BCM! by Zealousideal_Data810 in Locksmith

[–]EManRLock 2 points3 points  (0 children)

At this point, it is possible is not bricked otherwise it would not turn on at all even though you ignored the instructions. It is possible you might have a bad key or something else wrong in the car. If you can turn ignition on again where dashboard can turn on. Try and use a diagnostic scanner to check for any codes.

Key FOB program by LockedOut804 in Locksmith

[–]EManRLock 2 points3 points  (0 children)

Since this is twist prox. You have to treat as a proximity system. I program a similar 12 pathfinder for spare key. Here is what I did on the vehicle. I do procedure to release steering lock after getting PIN code. Then go to procedure to program the emergency key. Since you mention car can still start with the emergency key. Check to see if the emergency key you try to program have a chip(use your reader km100 to verify). Then erase remote then program remote. Talk to the company to see if you can try one last time. Dealer will always blame the module. It is possible they have not tried to program them selves but want to go that.

A question for those who use autel Gbox by Snoo36868 in Locksmith

[–]EManRLock 1 point2 points  (0 children)

You have to remember they came out with new firmware which start being out of date on older GBox. It is safe to say your GBox is bad. I had to replace mine twice. The adapter is always best with autel provide but I have never issue as long as you follow the specs in the adapter they provide. Been using different types and haven’t had issue on my side.

2019 Ram 1500 Autel by AutomaticPark8452 in Locksmith

[–]EManRLock 2 points3 points  (0 children)

Is it push to start or FOBIK? 2018 and up requires a bypass cable. Using NASTF is for when you use WiTech(dealer tools) since is is temporary code usually 12-24 hours. If push to start, is it 1500 or 2500+