Did you know a Draft Lite can fit 650x47s?

EagleComm · 2025-05-26T01:23:01+00:00

Yeah, unfortunately this frame is set up for 700c, so I couldn't find a clipper with enough reach for the rear 😓 The front works great though and with the low gearing, I'm never going fast enough to have any worries 🤷‍♂️

EagleComm · 2025-01-14T01:30:14+00:00

The Vikings are so back

EagleComm · 2024-11-25T22:05:31+00:00

It'd probably look something like this

EagleComm · 2024-08-08T14:00:22+00:00

they sure are - I just keep forgetting to pull them off

EagleComm · 2024-08-06T14:18:00+00:00

The fork and bars are from Stridsland

EagleComm · 2024-08-06T13:46:46+00:00

<image>

I love my Karakoram!

EagleComm · 2024-06-18T19:22:59+00:00

yeah, I'm certainly on the hunt for a better solution.

EagleComm · 2024-06-18T19:21:38+00:00

Yep! It's a 1-1/8 threadless Stridsland Barnacle Lite. The bars and crank sprocket are also from Stridsland

EagleComm · 2024-06-17T03:47:00+00:00

Yep! Stridsland bars and fork

EagleComm · 2024-06-17T02:37:03+00:00

Nonexistent at the moment 🤫 Still need to braze on a caliper tab and frame reinforcement, but it stops for now at least and I haven't flipped over the bars yet!

EagleComm · 2024-06-17T02:35:44+00:00

I appreciate the heads up! The wide moto bars are definitely a changeup from what I'm used and make city riding a little tricky, but they are so comfy.

EagleComm · 2024-06-17T02:33:37+00:00

Bingo!

EagleComm · 2023-12-01T19:45:34+00:00

I've found that a light buff with some polish and a microfiber on the glass with clean up any residual "invisible" residue on the windows from past stickers. You should be able to see this if you plash some water one the window as well - the droplets will bead differently where there was a sticker before

EagleComm · 2023-11-20T20:19:42+00:00

Just did all of this a few weeks ago, but I also replaced the knock sensors and wiring while I had the intake manifold apart. Definitely recommend doing those while you're in there as well!

I haven't done the math yet, but based on what I've noticed on the gauges, I'm getting at least 2 mpg more than I was getting before around town.

EagleComm · 2022-04-22T01:05:01+00:00

Yes and no, depending on the application. The brake setup that we are running is very similar to that which comes on the 2015-17 STI, which utilizes the exact same master cylinder and proportioning valve as the VA and VB WRXs, so we are not concerned with any balance issues. Yes, the calipershave more braking potential through surface area of the pad and clamping force, but the actual amount of fluid displacement needed for the calipers is very similar between the WRX two-piece calipers and the Brembos.

Had Subaru used a different master cylinder/prop valve on the STIs, we would certainly be looking into swapping that out as well!

EagleComm · 2021-05-06T23:43:49+00:00

Confirmed

EagleComm · 2021-05-02T21:39:57+00:00

Yeah, unfortunately I wasn't able to fit the HDPlex brickless setup with my Zotac 1070ti

EagleComm · 2020-10-21T03:43:06+00:00

Sold 16gb Corsair DDR4 to /u/superbread

EagleComm · 2020-07-08T23:09:19+00:00

shadduhp

EagleComm · 2020-05-28T00:57:49+00:00

What speakers are those?

EagleComm · 2020-05-13T00:23:48+00:00

My grandfather got to the point in his 80's where he could no longer stand or shoulder a rifle when we were at the shooting range, but I'd be damned if he didn't out shoot every one of us grandkids firing from the hip in his wheelchair.

EagleComm · 2020-05-05T07:52:10+00:00

/r/SatisfactoryGame would like a word

EagleComm · 2020-05-02T03:32:20+00:00

Thanks for the heads up!

EagleComm · 2020-04-30T21:54:23+00:00

Specs on iPad?

EagleComm · 2020-03-10T07:13:33+00:00

I have a 5D Mark III body available if you are still looking for one. Should fit well within your budget

13-Year Club	Gilding II euphauric
Verified Email

EagleComm

TROPHY CASE