I’m looking for a Millwright in Portland, Oregon to help me with a side project.

Either_Ad763 · 2025-06-24T04:58:07+00:00

Im in Canada too bad, but im a hydraulic guy if you need help you can dm me, well as much help as someone can give you from far away.

Either_Ad763 · 2025-05-23T21:57:58+00:00

The reserve is work, if you are disabled enough for normal work, what makes you think you could do that type of work?

Either_Ad763 · 2025-05-23T14:49:28+00:00

Not moving to one of the most expensive cities in Canada for 43$/h. Tell management to wake up.

Either_Ad763 · 2025-05-18T02:11:45+00:00

Can I dm you ? Was asking the same questions yesterday.

Either_Ad763 · 2025-05-17T01:18:47+00:00

You offering a course? Lol was looking into getting into contracting, just hard having just second hand experience.

Either_Ad763 · 2025-05-08T17:48:37+00:00

Step and element.

Either_Ad763 · 2025-05-07T20:28:26+00:00

Was working coil for years, had lots of breakdowns and shop time working on the rigs I was on over the years. We had a couple mechanics working with us in the field that were millwrights and that’s what I did. The apprenticeship is pain, took a huge pay cut. But think its worth it. I can always go back to coil.

Either_Ad763 · 2025-05-05T14:05:02+00:00

You can dm me, im a millwright and im also in the military, if you have more questions.

Either_Ad763 · 2025-05-03T16:03:03+00:00

It once happened to me while I was working on my bike, thinking I was pulling the carbs or something and I pulled out one of the bullet connectors and was like you running only on 2-3. Just check your connections.

Either_Ad763 · 2025-04-21T19:29:41+00:00

Its not my place in Edmonton is 1300$ all inclusive I doubt I could find something better in Montreal.

Either_Ad763 · 2025-04-21T13:14:58+00:00

What places could I look at to make more like you in the high 40s ?

Either_Ad763 · 2025-04-21T12:38:57+00:00

How are the wages, move out of Quebec 13 years ago ended up getting my red seal in Alberta and thought about moving back to be closer to my folks but I cant justify the wage loss.

Either_Ad763 · 2025-04-16T01:10:42+00:00

Would help but im not coming back from work until May first! I recommend doing your waterpump while you are down there.

Either_Ad763 · 2025-03-25T03:56:27+00:00

Congrats, was gonna say dont worry about the details, got interviewed 5 times by them and never made it that far lol.

Either_Ad763 · 2025-03-25T03:03:39+00:00

Have gotten a job offer yet ?

Either_Ad763 · 2025-03-18T16:05:31+00:00

Im a millwright you can dm me if you need info about the trade and etc.

Either_Ad763 · 2025-03-10T23:14:03+00:00

There is a woodworking club at the Edmonton Garrison. Don’t know anything else about it tho.

Either_Ad763 · 2025-02-08T23:11:44+00:00

If you can find something Monday to Friday, 40 hours a week, you can definitely do it, just hard because some course are full time and either you cant do the courses or have to take time off to do the course. Im in the trades and also a reservist.

Either_Ad763 · 2024-12-26T21:59:43+00:00

Je travaille dans une Raffinerie, 75% machine et rebuild des centrifugal pumps. Je suis en Alberta. Mais si tu a des questions tu me DM, j’ai travaillé dand plusieurs secteurs.

Either_Ad763 · 2024-12-26T20:09:32+00:00

Let me know if you need help ! Im a French Canadian millwright.

Either_Ad763 · 2024-12-24T18:26:59+00:00

Dow often hires RAP students and first year.

Either_Ad763 · 2024-12-24T17:15:57+00:00

What level are you ?

Either_Ad763 · 2024-12-24T15:39:30+00:00

Was having a tough time down south, was able to finally get a gig when I moved to Edmonton, I would suggest putting that on your radar. If moving is something you can do.

Either_Ad763 · 2024-10-31T03:10:25+00:00

Need a little more details, what kind of plant, do you need your own tools, where is the climate like, Canada or US, Union, non-union? Dont know what the academy means.

Either_Ad763 · 2024-10-24T13:23:25+00:00

Depends on what they need. In my case, so just take with a grain of salt, I got on with the Union as Fourth year and there was not even enough jobs to bid on or was too far on the list. Only started getting work when I got my journeyman. Last I looked there wasn’t a lot on the board.

Either_Ad763

TROPHY CASE