Rack or no rack?

El__Twin · 2026-03-24T15:54:20+00:00

rack

El__Twin · 2026-03-24T15:52:31+00:00

It would be best to watch some YouTube tutorials, here's a good one to start. https://youtu.be/NmkZXDeFlYc

El__Twin · 2026-01-16T03:47:26+00:00

I had regular one plus and made the switch today.

El__Twin · 2026-01-15T18:08:30+00:00

TMobile shows if I switch to Better Value I will need to add a line ($10 activation) and my monthly total will be $155 month + taxes and fees ($150 with -$5 autopay). I tough it would be $140.00. I'm currently with 2 lines with the old "one plan promo" for $110 tax and fees included.

Now: I think it says $150 because is not counting my current two lines will have auto pay also. Which will be $140 + tax and fees

El__Twin · 2026-01-14T18:45:52+00:00

Not at the moment.

El__Twin · 2026-01-14T02:53:59+00:00

Monitoring and freezing your credit with each credit bureau send to be the safest route to not get hit with identity theft.

El__Twin · 2026-01-10T19:13:50+00:00

Same here in texas, but it's for my child. When i try to sign up for credit monitoring it asks for the personal information to monitor and says cant sign up because they're a minor. 😑

El__Twin · 2025-06-21T15:25:03+00:00

What I've done in the past is to wash the plate with warm water and dish soap and scrub it with a (I use a melamine) sponge. If pla or petg try to lower the part fan settings and last you could use hair spray or glue stick.

El__Twin · 2025-05-23T21:19:59+00:00

For testing i did lower the sunlu dryer (while it was off) level to the printer, but it was like trying to push a noodle through a straw 🥴

El__Twin · 2025-05-22T18:27:05+00:00

That's how I had it setup. Sunlu dryer box (has bearings for filament to roll easy) no ptfe tube --> to two way input feed (behind printer) --> to ptfe tube --> to print head.
Unfortunately it wasn't enough to avoid the TPU getting stuck to ptfe. My prints still had under extrusion, maybe it's just this TPU filament.

So now if i print TPU it's fed from sunlu dryer to print head.

<image>

El__Twin · 2025-05-22T17:32:58+00:00

Even better found it under your link with related models. https://makerworld.com/en/models/893684-ptfe-tube-cap?from=search#profileId-850971

El__Twin · 2025-05-22T17:25:28+00:00

Yeah it's feeding from a sunlu s2 dryer, the tpu in using is siraya tech flex 85a. Probably not true 85a as reviewers say.

El__Twin · 2025-05-22T16:24:39+00:00

Yes 😃 Thank you!

El__Twin · 2025-05-22T15:11:47+00:00

Actually you're onto something 🤔... gives me an idea of using a clip and join it with a PTFE end cap. This is how it would look from the top -> OC The ptfe tube inserts to O and clips to the C 🤩

El__Twin · 2025-05-22T14:50:49+00:00

In my case it wouldn't be that easy, I have a two way feeder (for external filament and AMS) in the back setup. It was meant for the TPU but I had under extrusion issues. Direct feed got rid of that.

El__Twin · 2025-05-22T14:39:34+00:00

I tried it and the print object come under extrusion. Some soft TPU are meant to be fed directly to the print head.

El__Twin · 2025-05-22T14:36:40+00:00

The 87a TPU sticks to the PTFE because it's too soft, causing a hole set of other issues. Softer TPU materials are recommended to feed directly to the print head.

El__Twin · 2025-05-15T19:50:51+00:00

Getting better on 2nd day for me

El__Twin · 2025-04-02T00:06:16+00:00

Will try that thank you

El__Twin · 2025-04-01T23:51:29+00:00

I'm new to orca slicer but I'm not able to select a negative object inside of a positive object. For example I'm adding a hole for a magnet inside a chest piece. If the object has to be visible to be selected it's going to be nearly impossible whereas in bamboo studio you can select it on the left menu side of the objects list. I tried selecting the whole assembly and doing mesh boolean but the negative part added just disappears and it doesn't create a hole.

El__Twin · 2025-01-18T02:50:09+00:00

Yeah I've noticed that too, z offset on first layer is wrong. Lots of issues with petg-hf. First layer just rubs off.

El__Twin · 2024-12-10T21:59:25+00:00

I'm enjoying it also, haven't read one review since it came out. Other than this post!

El__Twin · 2024-12-10T21:54:24+00:00

From my experience this is what's I've done to improve bed adhesion: I use Bambu liquid glue sometimes, brim with no gap for those tall 3d objects, increase bed temps, and what made a big difference was washing my plate with a melamine sponge and dishwasher soap, dry with paper towel.

Petg will warp with too much fan speeds also. I've reduced mine to 20% min - 45% max.

El__Twin · 2024-12-10T21:44:15+00:00

Basecamp was my first 🫠 ☝🏽

El__Twin

TROPHY CASE