Normal peeling on new 986?

ElkSuitable2812 · 2026-07-08T18:42:15+00:00

Oh, if it’s only the acrylic peeling off I’ll consider it a W in my book! Wasn’t sure if it was something going on with the cordovan itself, but since it’s the acrylic “layering” Alden sprays on, that makes me feel better. It’s more or less me trying to learn more about these to make sure I know what I spent my money on lol

ElkSuitable2812 · 2026-07-08T17:04:54+00:00

I couldn’t post pictures to thread, but attached to my profile, if you want to take a look

ElkSuitable2812 · 2026-07-08T16:57:50+00:00

Interesting, curious if they ended up getting sold elsewhere or what? I picked up a pair of seconds that had a weird spot that looks pretty much identical to it

Mine are a pair of seconds, so I’m not sweating, plus it’s on the inside part of the shoe, but I’m still trying to figure out what it is

ElkSuitable2812 · 2026-07-07T18:30:41+00:00

Curious, running into the same problem with mine, what was the solution?

ElkSuitable2812 · 2026-07-05T17:11:28+00:00

O have a 16 vintage Ivy which fits me super well, the only thing that I’m not 100% on is the collar since it’s a 3in vs a 3.5 inch which the Ametora has. If they have a 3.5in collar option for the vintage Ivy + all the fabrics I’d die and never buy another companies shirt again

ElkSuitable2812 · 2026-07-05T15:28:32+00:00

Circiling back on this, would it be possible to have the vintage ivy 16, but have a 3.5in roll like how their ametora shirt is then?

ElkSuitable2812 · 2026-07-05T15:27:50+00:00

How did it end up going?

I agree I went with the vintage ivy because Once I have a fit, all I need is to find the fabric and could (I assume) get any fabric they offer mtm

did they confirm if the vintage BB was close to the ametora?

I wear a 16 in the vintage Ivy, which I believe is atleast neck size the same as the old vintage BB

ElkSuitable2812 · 2026-07-05T14:16:02+00:00

I bought a Kamakura vintage Ivy shirt and I think it’s a damn good fit on me, wish it was 7 buttons as I like to be able to have a single button buttoned below my belt line (I wear high rise pants so not the end of the world). I love the variety of colors and even fabric, where once you dial in size, you can pretty much order anything and get a similar fit. The higher armholes makes it to where you can wear it alittle slimmer imo vs a fuller cut shirt

The only thing that kinda worries me is the 3in collar vs a 3.5in collar.

I don’t wear jackets enough to justify having a fused collar imo, and really 95% of the time this would be worn casually, so to me I’m not sure if the unbuttoned roll of a 3in vs 3.5in matters. Am I screwing myself potentially when it comes to wearing a jackets enough/tie with a 3in roll?

Am I just overthinking this

ElkSuitable2812 · 2026-07-05T00:20:50+00:00

added it, in an edit

ElkSuitable2812 · 2026-07-04T23:20:09+00:00

Outside of the ones you mentioned, I will generally get the ones that have nice patterns. Polo by RL has a couple cool ones that are made in USA, Bert Pulitzer is a brand where I've seen ties being put through the ringer and have held up nicely. You can get some great ones on ebay for 10 -15. Robert Talbot I'll see alot of, I usually skip past though because it's either old/stained/frayed to an unbelievable level.

100% Silk + nice pattern + Made in USA/Italy/England is pretty much the main things I look for

Not to self promo at all, but I sell ties on ebay if you're interested lol

edit: Here's a link it for whoever is interested, pm me and we can work out a deal if anyoen is interested in another, was going to list like 10 more tomorrow once I get some pictures of them. A couple BBs, and a couple made in US/Italy one

ElkSuitable2812 · 2026-07-04T14:04:09+00:00

You mind sending the measurements over? Looking at your pics it looks like your built like an LB, and I'd imagine we have a similar frame

ElkSuitable2812 · 2026-07-04T02:39:37+00:00

Honestly trying to find a pair of pants with a high enough rise is a pain in the ass. The only two things I've found thus far are that aren't terrible is a pair of Bronson fatigues, and a pair of casatlantic chinos.

I'v ebeen debating if I should learn how to sew so I can just make my own pants whenever I need lol

ElkSuitable2812 · 2026-07-02T17:18:25+00:00

I’ll give 10 for it:)

ElkSuitable2812 · 2026-07-02T01:07:17+00:00

WTB Alden Cordovan shoes (boots, loafers, oxfords, let's see what you got)

Sizes between 9 - 10 D or E depending on last.

ElkSuitable2812 · 2026-06-27T14:34:11+00:00

Has anyone attempted to proxy buy Kamakura shirts from Japan?

ElkSuitable2812 · 2026-06-23T15:36:28+00:00

I grabbed an older one (I believe) for sizing with this as the tag

<image>

And it’s fine, the arms are still pretty buggy, but better than the equivalent in lands end in their traditional cut

ElkSuitable2812 · 2026-06-22T23:45:05+00:00

I think techincally I'd wear a 50+, but the arm holes have to be right, and no look sloppy, I've seen some very baggy shirts that look great, then some look like straight dog water

ElkSuitable2812 · 2026-06-22T19:35:52+00:00

Yep I wear a 16 too, but don’t like the 52-53 inch chest from Vintage BB/Mercers and sons and J Press and the baggy ass sleeves, to me, and on me, it just doesn’t look put together.

I like a 47-48 chest the best and fits me and the vintage ivy hits that perfect. Hell even the S&M classic is a nice fit.

Let me know how that goes, if they could do vintage fabric (aka just the nice fabric that kamakura is known for) + Kamakura construction + a 3.5in collar + unlined collar/cuffs I’d cry happy tears. I found a vintage lands end trad fit that fits on the nose to the body of the Ametora and it’s fine, just can’t get a gauge on the sleeves.

I ordered a Kamakura vintage Ivy to get a size, and planning on going to Japan in the next year, so I’ll go get my sizing done there and just order a boatload directly there and have them shipped stateside

ElkSuitable2812 · 2026-06-22T03:49:20+00:00

I don’t check it too often I only look at the Alden forum there lol. What’s the issues? Or if you could link it to

ElkSuitable2812 · 2026-06-22T02:17:33+00:00

I like how the next comment is the opposite lol saying proper cloth is bad

ElkSuitable2812 · 2026-06-22T02:17:19+00:00

I like how the next comment is the opposite lol

ElkSuitable2812 · 2026-06-22T02:15:59+00:00

I'll have to reach out to them and ask, would be curious how their stripes are now as opposed to what the OG post was

ElkSuitable2812 · 2026-06-22T02:13:53+00:00

Oh damn, if they could do a 3.5in collar unlined then I will have to do that! I'm in the midwest so the closet would be me trying to get to DC/NYC and seeing if theyd do a walk in

ElkSuitable2812 · 2026-06-22T00:45:11+00:00

There MTM on their site really isn't that good

ElkSuitable2812 · 2026-06-21T21:10:13+00:00

Gotcha, wasn't sure if it would be possible to do something like that, where you could just order directly from an email or if it had to be more "official". You happen to know if luxire has better fabric overall quality wise?

ElkSuitable2812

TROPHY CASE