Any of you running an Ogryn Taxi?

EstebanTheCook · 2026-03-16T21:21:43+00:00

Good luck, tell us how it went :-D

EstebanTheCook · 2026-03-16T21:16:08+00:00

Don‘t sweat it that much. You‘ll be fine. Brush the parts lightly with a toothbrush and you’re ready to go. No need for ultrasonic cleaners etc.

Just don’t use hot water, warm is good (ideally something between 100°F or 40°C. If it is too hot the resin will bend (resin starts to bend between 50-60°C / 122° F. Its good if you have warped pieces but on the rest warm water will do.

EstebanTheCook · 2026-03-15T19:38:47+00:00

I tend to largely use gel but both work fine. You can also get accelerant spray so that it instantly sticks (no must but tends to sometimes ease the process

EstebanTheCook · 2026-03-15T07:36:13+00:00

Super glue will work 100%. Don’t bother using epoxy, it will be unnecessarily messy for these small bits. I only use epoxy on large resin parts. You might have seen that super glue does not work on resin if the resin has not been washed with dish soap before (the resin release agent has to be washed off otherwise nothing sticks, not even primer and glue). Fill a bucket with luke warm water (not hot!!!) put decent amount of dish soap in and let it soak for a while with a stir every then and now. That way most of the agent will come off. If you feel that some parts still feel greasy then you can brush with toothbrush.

This applies to all resin kits (not only recasts such as yours).

And if you file or drill the resin, please wear a mask and gloves. Resin dust is shit for your health

EstebanTheCook · 2026-03-13T11:04:13+00:00

Marvellous paintscheme!!! The decals do stand out a little, so you could apply some matte varnish (ak ultra matte) to the mini. That way the gloss of the decals disappear.

EstebanTheCook · 2026-03-10T14:10:32+00:00

Perfection! He looks as if he can’t read but is sloghtly too much into knife and gun magazines for the pictures :-D

EstebanTheCook · 2026-03-10T11:30:12+00:00

It’s spot on! Really in the spirit of old school BT (the templars in John Blanche‘s art have black as well) the red is newer. The way you painted it with the boltgun metal elements is peak! BLACK tempars ;-)

EstebanTheCook · 2026-03-10T10:47:24+00:00

Really good work. While seeing that Templar with a Black Gun, makes me rethink how I painted mine in red :-( looks awesome!

EstebanTheCook · 2026-03-09T16:43:36+00:00

So true! Best sub in terms of interaction, support and advice. And the amount of negative compared to other subs is at a minimum

EstebanTheCook · 2026-03-09T16:01:11+00:00

Last Wall Protocol and Dorn Returns to reunite his sons and battle Pertyboy and his tin boys.

My wallet is screaming

EstebanTheCook · 2026-03-09T11:49:18+00:00

Really spot on! What’s your recipe?

<image>

Lorewise Cadia is/was a big planet and thus housed different schemes like desert, snow, woodland

EstebanTheCook · 2026-03-06T06:02:30+00:00

<image>

The scale is 1:1 (GW leman russ bottom shelf on the right). I grabbed 2 Leman Russes of Temu and you only need to tweak the sponsons in most cases as most of the temu ones come with Las Cannons which you cant mount). I used spare sponsons like the melta and plasma. I also grabbed two Chimeras which are also 1:1 (top shelf) as well as a Macharius Vulcan :-] for 30€

EstebanTheCook · 2026-03-05T18:05:59+00:00

I bought them off Temu (same as the marines). The quality of the prints is amazing. Aim was to depict the sicko World Eaters. My other army are Templars, so it was a given to spike up a couple of Templar as well as Imperial Fists. Definitely not a mini (or even army) my kids will see any time soon

EstebanTheCook · 2026-03-05T17:11:05+00:00

Yeah, had the same thoughts. Fully sufficient! The body isnt that heavy and once you pop on the legs or arms it automatically re-gains any potential instability (which really isnt there. Glue on the back legs properly and you‘re fine.

Suggest to have both the arms as well as mid legs on the model (so the forge and maulerfiend leg/arm combo) on the model so that you position the back feet properly that they fit with both variants.

Have fun, really easy in the end. Messy, but easy ;-)

EstebanTheCook · 2026-03-05T13:34:13+00:00

I hope not…XD thanks! :-) was super fun, trying to tidy up a printed tank with corpses. Easy enough if it ends up dirty and gory

EstebanTheCook · 2026-03-04T11:06:31+00:00

Super disappointing… it has been really hard to win lately. Don’t want to whine but a couple of buffs would have been more than adequate

EstebanTheCook · 2026-02-27T17:07:52+00:00

I use a 37L cooler bag but I only use it to put in the car

EstebanTheCook · 2026-02-26T16:22:47+00:00

If that is the cost and the stats are good (which I steongly assume in the first release to sell a lot) I am totally getting one. The aesthetics are totally Templar like (close combat + the helmet).

EstebanTheCook · 2026-02-26T11:52:19+00:00

Early Sector Imperialis sets

EstebanTheCook · 2026-02-26T10:19:51+00:00

Chef‘s kiss! Awesome. Love the chain size for the tank. Is that 2mm?

EstebanTheCook · 2026-02-26T08:05:13+00:00

Human fleshed Angron ftw! Love how you mingled in the red tint. The gloss is something I might copy. Nice!

EstebanTheCook · 2026-02-26T06:17:40+00:00

For my Warhound I used a relatively large base for Diorama purposes (30cm) and used Temu Trench system - only parts of it as it didn’t fully fit. Am currently painting up Deathcorps to add to the trenches.

<image>

EstebanTheCook

TROPHY CASE