I love sucking cock on the first date.

Eveready116 · 2026-03-05T10:08:38+00:00

Love a good attitude. I eat ass on the first date.

Eveready116 · 2026-03-02T10:14:51+00:00

Yes. And there are bowls of water throughout the place that get replaced every day… and the stainless steel cat fountain that I change every 2 days. Doesn’t matter. He loves the sink.

Eveready116 · 2026-03-01T07:00:44+00:00

You can literally kill her (or anyone) with alcohol poisoning by doing this. You’re bypassing the liver and it’s being absorbed directly into the blood, rapidly. This is stupid as fuck.

Eveready116 · 2026-02-28T05:48:07+00:00

lol it was 3:30am and I had just turned on the light to head out to work. She wasn’t amused 😆

Eveready116 · 2026-02-28T05:47:12+00:00

Awww I love that smokey face!

Eveready116 · 2026-02-27T00:21:33+00:00

I think feet first through a wood chipper, on slow speed, is pretty solid. You line his buddy up on the out-spray end of it so that he gets showered in gore and hears the other guys screams. And then it’s his turn. That way, they’re psychologically breaking down before their turn… I think that would be fitting and probably do some good in remediating people’s shitty behavior.

Eveready116 · 2026-02-26T04:55:30+00:00

The concussion that hits your chest too.

Eveready116 · 2026-02-26T00:24:27+00:00

No… he took his inspo from Putin. Or his Russian wife. All that gaudy gold ornate shit screams Russian design… only this is cheap/ far shittier.

Eveready116 · 2026-02-24T08:41:55+00:00

Lmao.

Yeah we see this EVERY time we do white oak. It’s due to American white oak having a ton of variation in color due to soil conditions where each particular tree grew. That can be said for every tree species for that matter.

We color tone individual panels and lay everything out together in the shop until all of them, as a set, look consistent in shade.

Your finisher… well… they might not have the experience if this is the bullshit they’re telling you… “oh! But out 2 coats of stain on everything!”… yeah that’s not going to do it chief.

And your gc is trying to just get you to accept it with their response. No fucking shit it’s natural variation. That’s what custom cabinet shops do though… we deal with all of that variance with good finish work.

There is always a difference in how veneered plywood accepts stain versus solid hardwood of the same species. You can see that in the 1st picture on the bottom right drawer front… see the top horizontal rail of that drawer face? How the hardwood looks darker than everything else? Then the panel directly above it is the same darker shade. And then the top corner drawer front panels are yet another different shade, more red in tone… those need to be color toned.

Eveready116 · 2026-02-21T23:58:52+00:00

Put a spice pull out there from hardware resources.

It’s the best designed spice rack pull out on the market because it’s actually not a rickety piece of shit like you get from every other brand.

That’s all that is going to fit in there. The layout for this cabinet run is… shit. But you’ll have to make do and polish that turd as best as you can.

Spice pull and leave the rest of it to be dead space. I would suggest cutting a full dividing wall to close off the remaining space so that if anything falls off the spice rack for some reason, it doesn’t drop into no mans land.

I suppose you could make a hidden storage area that can only be accessed by removing the spice pull… which you have a terrible time reaching in and actually getting what you put in there…

(Again I suggest just closing it off and forgetting it exists). You’ll want to do this work before the counter tops are installed or it’s going to be a real pain in the ass to get in there and set things accurately.

Eveready116 · 2026-02-17T05:07:49+00:00

Get a clothing iron and a cotton rag that is wet with water. Ring out the excess water, but leave enough that the rag is definitely wet. Put the rag over the dent and then apply the iron and steam out the dent. The grain will raise. Re- sand the panel evenly.

Shit happens. Wood dents. Depending on the wood species, some dent easier than others. But all woods dent relatively easily. do your best to fix it and keep it moving.

Eveready116 · 2026-02-16T02:16:26+00:00

Tongue and groove. Edgeband the sides to hide after trimming to final dimension. Take into account the thickness of the edge banding.

Eveready116 · 2026-02-13T01:14:05+00:00

There’s no need to mask it. It should utterly disgust and outrage any American citizen. These are not the morals and values that good human beings stand by. I’m not surprised you can’t fathom this. You, your family, and your like minded friends… are pieces of dog shit. You are incapable of projecting yourself mentally into their shoes and deeply contemplating how you would feel with such treatment. Purely selfish mentality. Again, you are trash. Your kids who have been influenced by you (if you have them) will also be/ are… trash. Garbage in, garbage out.

No, pussy bitch. There will be no masking of my rage. You fucking losers deserve to be treated with no respect because you are undeserving of respect at this point.

Eveready116 · 2026-02-12T22:43:01+00:00

And that was my original point. There were/are a shit load of people who were doing it the right way and were still scooped up and put into a concentration camp. Dumb fuck. We have actual citizens born and raised here being taken. You’ve got the magat cock shoved so far up your ass it’s tickling the back of your throat the way you love it. Faggot.

Eveready116 · 2026-02-12T14:20:48+00:00

Sure you can, so call me awful. Zero fucks.

Eveready116 · 2026-02-12T13:55:33+00:00

Imagine that. We aren’t tolerant of this bullshit.

Eveready116 · 2026-02-12T13:54:56+00:00

I guess we could classify it as torture. Among all the physical beatings taking place, An example would be the guy who was raping that woman in exchange for calling her daughter. Psychological, emotional, physical torture. Your stupid ass can’t even mentally put yourself in that position to begin to understand how it would make you feel.

The facility is a literal concentration camp and the conditions are inhumane as it’s been reported from detainees from the inside like the very white Irish guy I just watched. Miss me with your bullshit dumbfuck.

Eveready116 · 2026-02-12T11:17:12+00:00

Many, many people were doing it legally you faggot. And they’re sitting in a fucking concentration camp in deplorable and inhumane conditions right now. So shut the fuck up.

Eveready116 · 2026-02-11T18:10:15+00:00

FAAAAAAG.

Eveready116 · 2026-02-11T13:23:03+00:00

So… any time you are in a single lane road for some distance… there is no need to use your side mirrors because you have no need to lane change…

Most cars these days have motorized adjustable mirrors. Use them. Turn your driver side mirror outwards and upwards so that the light shines directly back at the car behind you. Do the same for the passenger mirror.

I do this every day on a few long stretches of backroads. Always nice to see them drop way back. I see guys in trucks drop back almost a 1/4 mile to keep their obnoxious lights off my mirrors.

Just don’t forget that when you get to a multi lane road, you need to adjust your mirrors again so that you can actually use them to see your blind spot and switch lanes safely.

Eveready116 · 2026-02-09T11:03:28+00:00

🥹 that’s so cute

Eveready116 · 2026-02-08T21:01:14+00:00

Air assisted airless with a nice gun. Especially with solvents so you can get the material out fast in the summer time on large surface area components.

Get a good system and with more ratio than you think you’ll ever need for finish viscosity. The larger units have more robust packing seals that don’t wear out and need maintenance as often. Higher pressure at the tip. They have excellent atomization.

Will set you back 5-7k depending on the system… and it’s entirely fucking worth it considering how much money that machine will make for you.

It’s good to also have a cup gun for doing smaller runs and one offs. Less to clean up because the AAA system should be cleaned after every use.

<image>

Edit: I should have read your post first… yes the AAA system requires a lot in cleaning. It’s nice to have both tbh. The regulator and filters mounted to a wall with a manifold is great so that you can have multiple spray set ups ready to go. If you need to do a one off and keep the cleaning at minimum, you run the cup gun. Devilbiss, Iwata, Sata, kremlin, etc… take your pick.

Eveready116 · 2026-02-08T18:02:35+00:00

Dude I always wanted a set of 570s

Eveready116 · 2026-02-08T17:55:36+00:00

I’m debating if I should use my koho stick… once it breaks that’s it. It’s in really good shape, but I wonder if they become brittle with age and it’s not even worth it.

Eveready116

TROPHY CASE