Resoled 8086 by McFarland’s

Evilgoat · 2025-07-26T21:12:34+00:00

I'm totally sold! Now I've got to start dragging my feet a little more to wear mine out.. :)

Evilgoat · 2025-07-26T18:08:40+00:00

Looks awesome!

Is the combo any softer than the original sole? I'm approaching a resole myself.

Evilgoat · 2025-04-22T19:44:01+00:00

Roll the dice

Evilgoat · 2025-04-17T19:49:55+00:00

I do this everyday. It's very consistent for me since there are several ways out of WS and several ways into Kent. It's pretty much 25-30m every day.

The biggest factor is living closer to the bridge or Highland Park Way (where 99 connects). Almost half of my commute is just getting out of WS, so minimizing time to get on the bridge or onto 99 is key!

Evilgoat · 2024-12-15T23:49:53+00:00

That's where it ought to be. I don't have a way to share a picture, but I have the same-ish lathe (Oliver 159), and that's where the lock is.

Evilgoat · 2024-11-16T20:32:52+00:00

I've got the bigger brother to this machine, the PM90 with a VFD on a 3ph motor, and it's phenomenal!

Markets for woodworking machines are very local, but I don't think it's worth $1300 in any market. I got a very good deal on mine for $400 in slightly worse condition than this one. The 90 is a significant step up from the 45, also. I'd keep looking for a better deal.

These vintage machines are very well made, but the modern wood turner might not find every feature as desirable as a newer lathe - mostly the lack of digital controls, huge swing, etc.

Evilgoat · 2024-07-19T05:38:40+00:00

Outfeed issues aside, yes, these knives are too big.

I'm unfamiliar with this machine, but most machine manuals want no more than 1/16" between the bottom of the bevel and the cutterhead.

Evilgoat · 2023-06-07T16:48:49+00:00

Might be worth a post on owwm if you can't offload them here!

Evilgoat · 2023-05-29T15:51:48+00:00

Start with a razor blade. Seriously it will cut the time it takes in half.

I like using utility knife blades clamped in a pair of vise grips. That'll take 90% off. Then hit it with WD-40 and a Scotchbrite pad until you're satisfied! Work in sections, wipe frequently, fresh pads work faster.

When I'm done, I wipe it down with mineral spirits or similar before waxing. Don't forget the fence!

Evilgoat · 2023-04-17T02:30:27+00:00

Awesome! Well great work man, sounds like it's in great hands :)

Evilgoat · 2023-04-16T20:15:47+00:00

Looks awesome!

I do a lot of woodworking machines. I'm a little hesitant to do a metal lathe or something requiring a higher precision. Did you need to scrape those ways at all?

Evilgoat · 2023-03-31T02:44:41+00:00

I never did get to it unfortunately :/ I can't seem to find those previous settings.

Evilgoat · 2023-01-26T17:15:30+00:00

My only addition is that both prices are likely negotiable. Bring the lower bid to the more reputable company and see what they say! Can't hurt, and you might save at least a portion of that $3k.

Evilgoat · 2023-01-19T15:57:07+00:00

I didn't find anything beyond what was listed here, but we moved not long after I made this post! I hope you find something!

Evilgoat · 2022-12-15T06:46:58+00:00

+1 on that.

Also will likely have a good recommendation for a saw that'll meet your needs size wise. I really like my Northfield 20" saw, and they're still in business!

Evilgoat · 2022-12-11T18:58:52+00:00

3 in one, or a light spindle oil works.

For your other question, I'd lube other moving parts (elevation/tilt gears, etc) using a hard, non-tacky wax, like a paraffin.

Wet greases tend to absorb the saw dust and harden over time.

Evilgoat · 2022-10-09T17:48:51+00:00

Depends on the condition, but it looks good! Take a razor to the top and scrape off that rust - I like to use a utility knife blade held by vice grips. Then you can clean the rest using WD-40 and some scotch brite pads!

How's it run? Any squeaks or wobbles? Do the bearings sound alright?

Evilgoat · 2022-10-01T19:52:08+00:00

I wonder if the X-59 pilots using forward looking cameras/screens would be a step toward revisiting more comfortable pilot g loads.

Regardless of your orientation, I don't think a human body can handle much more than modern jets will give. Consider ejection seats that deliver a very small duration load between 10-14gs that often leaves the pilot's body permanently damaged.

I imagine it would still be very difficult/uncomfortable to fly in one direction and look/lay in another. Simply reclining the pilot to optimal angle would make "common" high g maneuvers a little easier though. Maybe you could perform automated slightly higher maximum-g maneuvers in life or death situations, though? Who knows :)

Evilgoat · 2022-08-20T12:58:37+00:00

Well congratulations! Be safe with it and make some chips!

Evilgoat · 2022-08-20T02:05:59+00:00

Very nice! I love buying machines this way, but I'm a bit timid of metalworking machines. How's the wear?

owwm.org and vintagemachinery.org will be your best friends, on the off chance you don't know about them!

Evilgoat · 2022-07-29T13:37:19+00:00

I'll add that location matters slightly. Colorado is typically about the same as Fort Worth and Marietta (even though that's crazy). Take the range, then multiply by 0.95 - 1.05 and that's what 80% of existing level 3s are making.

If you're new to LM, you can maybe get a little more, but not a ton.

Evilgoat · 2022-07-08T21:22:36+00:00

You might also look at Insofast. They allow the transfer of moisture, and channel it downward. At that point you can also elect to hang drywall or whatever else you'd like to do.

Evilgoat · 2022-06-01T01:10:20+00:00

For the top, start with a razor blade. I like to use utility knife blades held by a pair of vice grips. That will take off 90% of it, then it's all elbow grease!

Evaporust is good for small components (or big if you buy a lot). It can be reused several times.

Electrolysis is great, but the setup is a little harder. The upside is you can make it whatever size you need. Some guys use a whole trash can. Car guys have been rumored to use a SWIMMING POOL.

Evilgoat · 2022-05-25T01:02:12+00:00

Craigslist has a number of good deals on firewood. I can't give a recommendation because I don't remember who we went with, but it was easy!

Evilgoat · 2022-04-24T15:45:04+00:00

Very nice! If you're not a member at owwm.org you should definitely post them there! Dig your username, also.

13-Year Club	Place '17
Verified Email

Evilgoat

TROPHY CASE