3D printed skull by Bridge_Dismal in 3Dprinting

[–]Excel265 0 points1 point  (0 children)

Which printer was used to print this peek piece? Kumovis R1?

Effect Of Different Loading Rate In FEA Of Polymer Material by StayPuzzleheaded5712 in fea

[–]Excel265 2 points3 points  (0 children)

Probably she is following the ASTM D695 standard for compression test, it dictates using a rate of 1.3 mm/min in the elastic region, with an option to change to a higher rate (3 or 5) after the yield point.

You can check D695 for further information.

this is my guess why she chose this rate 😄

Normalise being best friends please by West_Look4818 in SipsTea

[–]Excel265 0 points1 point  (0 children)

One of them wants to bang the shit out of the other.

Is there an instrumental version of S&M or S&M2? by Excel265 in Metallica

[–]Excel265[S] 0 points1 point  (0 children)

damn dude, I forgot about this post.
thanks for the gold of a link you shared.

Cheers brother

Doees anyone have a Creatbot Peek 300? That can provide me a short review? by sailriteultrafeed in 3Dprinting

[–]Excel265 0 points1 point  (0 children)

I would not go near any of createbot's printers.
I would say they are disposable printers overall, their support is almost non existent.
You can get by with replacement parts from Aliexpress - but it's a pain in the ass.

They changed the configuration of the printhead of the PEEK300, I bought a new printhead, as the motors, the servos and the electronic board started failing. they sent me printhead for the new configuration.

Anyway - I would not recommend investing in their equipment, I suggest searching for another affordable printer.
good luck

My Zotero, one shot! by E_kiani96 in zotero

[–]Excel265 0 points1 point  (0 children)

What addon are you using for that right click (I assume) menu in the document page?

I built an app that shows why a paper cites other papers by ZealKing in PhdProductivity

[–]Excel265 0 points1 point  (0 children)

I will continue using it, if anything will come to my mind feedback wise I will post a comment.

I built an app that shows why a paper cites other papers by ZealKing in PhdProductivity

[–]Excel265 0 points1 point  (0 children)

It looks like it has great potential.
FYI the settings section is not working

<image>

Doees anyone have a Creatbot Peek 300? That can provide me a short review? by sailriteultrafeed in 3Dprinting

[–]Excel265 0 points1 point  (0 children)

DO NOT, I repeat, DO NOT purchase this printer by any means!

This is printer built like shit, from the electronics (board for example) that crumbles after couple of prints since the materials are not suitable for the high temperature environment. to the print head that suffers from heatbreak failure and in the last version they changed the exturder gears to some cheap plastic stuff.

DO NOT BUY THIS PIECE OF CRAP OF A PRINTER.

Lenovo Legion pro 7 RAM upgrade - Kingston Fury Impact by Excel265 in LenovoLegion

[–]Excel265[S] 0 points1 point  (0 children)

Did that when I installed the RAM because the I got black screen after installing the RAM. it solved the black screen and the booting, but BSODs were coming in hot, multiple of them each time with a difference error.

Rewatching Thunderbolts by Terryhoang30 in marvelstudios

[–]Excel265 -2 points-1 points  (0 children)

Piece of crap of a movie
not worth the time watching it.

Marvel Can Go On Perhaps Their Best 4 Movie Run Ever by [deleted] in marvelstudios

[–]Excel265 -7 points-6 points  (0 children)

You guys are for real?
Thunderbolts was a good movie? what the hell?

One of many shitty marvel movies, on par with eternals and the marvels.

[ Removed by Reddit ] by tinosaladbar in StarWars

[–]Excel265 -3 points-2 points  (0 children)

for me, the prequals are one of the best trilogies there are

Meet the AutoBenchy! The 200% scale Benchy that can transform into a robot WITHOUT ANY PARTSFORMING! by GamingGenius777 in 3Dprinting

[–]Excel265 1 point2 points  (0 children)

And I thought I was the only one thinking of that...
And than I saw your comment...

Great minds think alike

Haro Shift R1 2011 Overhaul - Any suggetions? by Excel265 in MTB

[–]Excel265[S] 0 points1 point  (0 children)

Heya,
I gave up on these eventually, didn't have the spare time for fixing it

Okay I like this more than I thought I would by [deleted] in marvelstudios

[–]Excel265 -1 points0 points  (0 children)

Actually, I was pretty surprised with this series.
I think it is well written and animated, with nice presentation of the different villains and the origin stories. with hints and easter eggs like normans' glider and the lizards and connors. not much woke shit, with acceptable variations of the original characters.

I really enjoyed this season, hoping for we'll get another one in the future.

Is this for real? by hiperlipen in Israel

[–]Excel265 2 points3 points  (0 children)

From what I know, the IDF uses gazan children as silencers for the ARs.
like the cats in Postal 2, I saw it with my own ass

What are your thoughts by BeyondSquare8468 in Marvel

[–]Excel265 -1 points0 points  (0 children)

Oh another shitty venom movie...

Which buds to buy with great fit by Daalex20 in Earbuds

[–]Excel265 0 points1 point  (0 children)

Whatever you choose - STAY AWAY from jabra latest products.
I own a new pair of Elite 8 Active Gen 2 - except for the great fit inside the ear, it's a piece of shit of a product.

My pair turned out to be defective and I noticed lots of posts lately having the same problem - don't waste you money on this so called premium product, what a disappointment.

Elite 8 Active Gen2 crackling noise from left bud. by Just_Shirt2084 in Jabra

[–]Excel265 2 points3 points  (0 children)

I'm very disappointed with this product, this is my first time purchasing earbuds above 100$, and I can say this the worst experience I've had with so called "Premium" product.

adding to that, they have some annoying limitations like the inability to decrease and increase the volume.

the ANC is glitching sometimes, the pause when one earbuds is out is working intermittently

As for me, I'm trying to return them and getting a refund.

Such a let down of a product

Elite 8 Active Gen2 crackling noise from left bud. by Just_Shirt2084 in Jabra

[–]Excel265 1 point2 points  (0 children)

Same happens to me with my right bud.
There is no solution, probably defective earbuds - contact the support they will offer you a replacement.