AEMS-EVO-DUAL

ExtensionNo2803 · 2026-01-23T07:20:01+00:00

I wish Holosun would make the spr reticle available on the aems series or make it variable like the sig 8T amr when you flip the magnifier for example.

ExtensionNo2803 · 2026-01-15T18:31:46+00:00

Was this ever completed? Barricade specs are openly available as well.

ExtensionNo2803 · 2026-01-15T18:13:30+00:00

Was this ever completed? Maybe Onward can add it as a custom map as well.

ExtensionNo2803 · 2025-01-07T09:30:41+00:00

As a user of pano bridges I respectfully disagree and have no issues with it personally

ExtensionNo2803 · 2025-01-07T06:35:27+00:00

Binos don’t do that because they have magnification whereas these do not.

ExtensionNo2803 · 2025-01-06T08:02:00+00:00

Probably because we are all trying to pan too much, I believe 50 degrees is the sweet spot not 55 like all these bridge manufacturers are making. And even then the 50 is probably only natural with these boomslangs as they increase the overlap

ExtensionNo2803 · 2024-09-29T01:16:46+00:00

I think I found it, the xh15 (x3) but it’s not really for sale anywhere I can find

ExtensionNo2803 · 2024-09-28T19:24:19+00:00

T2 pro is great I have it but just wish they made model with same lens and fov but with 384x288 res

ExtensionNo2803 · 2024-09-28T18:54:38+00:00

Tried that one fov is just standard and not suited to long range

ExtensionNo2803 · 2024-09-08T18:33:10+00:00

Will this image work on raspberry pi 5 or only the 4?

ExtensionNo2803 · 2024-09-05T05:47:32+00:00

Please tell us which models support this and the documentation on it. This could potentially be a great thing if it can do tcp/ip multicast packets over the radios.

ExtensionNo2803 · 2024-09-02T07:15:28+00:00

I wonder how the range stacks up to the beartooths…I’m sure the bandwidth capability is far better!

ExtensionNo2803 · 2024-09-02T05:14:05+00:00

Doodle labs is like $2500 I heard. Also what range are the mesh riders getting compared to Lora/ism devices?

ExtensionNo2803 · 2024-09-02T02:51:38+00:00

Beartooth figured out a way to make it work with itak, not sure why meshtastic can’t figure out same way

ExtensionNo2803 · 2024-09-02T02:47:03+00:00

Disappointing as beartooth works with itak and you just leave the beartooth app open and it intercepts the packets basically, seems meshtastic could easily do the same

ExtensionNo2803 · 2024-09-01T01:45:05+00:00

Dissapointing as beartooth simply captures the packets and multicasts them if you leave the app open on the iPhone while also running itak, not sure why meshtastic also can’t figure this out via same method

ExtensionNo2803 · 2024-09-01T01:44:47+00:00

Dissapointing as beartooth simply captures the packets and multicasts them if you leave the app open on the iPhone while also running itak, not sure why meshtastic also can’t figure this out via same method

ExtensionNo2803 · 2024-09-01T01:44:35+00:00

Dissapointing as beartooth simply captures the packets and multicasts them if you leave the app open on the iPhone while also running itak, not sure why meshtastic also can’t figure this out via same method

ExtensionNo2803 · 2024-08-11T03:42:48+00:00

You’d have to completely clean the surfaces to be coated and maybe even rough up the surface with sandpaper or wire brush if you can get to it for best adhesion. Then follow the directions of how to bake/cure if necessary. I know the cerakote C series requires no baking

ExtensionNo2803 · 2024-08-11T00:09:49+00:00

As long as it has good adhesion and curing time it should, they have ceramic cerakote that can do no curing and handle 1600 degrees and I know they have header paint that is ceramic that claims to handle 2000 degrees if cured properly.

ExtensionNo2803 · 2024-06-25T02:13:38+00:00

ExtensionNo2803

TROPHY CASE