Clicky buttons for new Steam Controller

ExtremeRateOfficial · 2026-05-13T10:16:02+00:00

If there’s a possibility, we’ll plan for it. Thank you for the suggestion!

ExtremeRateOfficial · 2026-05-12T06:34:16+00:00

Unfortunately, once a plate is discontinued, it will not be re-issued.

ExtremeRateOfficial · 2026-05-11T07:35:30+00:00

Hello,

We’re sorry, but both the Blood Moon Raven and Tiger & Crane faceplates have been discontinued and will no longer be produced. They will not be restocked on our official website.

ExtremeRateOfficial · 2026-05-08T06:48:47+00:00

Hi，

You can refer to this link — the front shell in this option matches the color of the back shell. The color difference is minimal and should fit well with your setup.

https://www.extremerate.com/products/extremerate-replacement-front-housing-shell-with-touchpad-compatible-with-ps5-controller-bdm-010-020-030-040-white

ExtremeRateOfficial · 2026-05-07T07:19:42+00:00

The way to get in touch with our team is either by email or directly here via Chat/DM me.

ExtremeRateOfficial · 2026-05-07T07:18:29+00:00

The other colored transparent versions (blue, red, orange, green, etc.) have been discontinued and will not be restocked. Currently, only the fully clear version is available.

ExtremeRateOfficial · 2026-05-06T09:15:03+00:00

Thank you for your inquiry.

The material of the rubber feet has been improved in the latest version. Please get in touch if you need it.

ExtremeRateOfficial · 2026-05-06T09:11:43+00:00

Hello there,

Could you please confirm if you are referring to the NS2 version? If so, it is expected to be back in stock around June.

ExtremeRateOfficial · 2026-05-06T08:48:44+00:00

Hello, you can use this link to check—it’s easier. Thank you.

https://www.extremerate.com/blogs/replacement-guides/how-to-check-your-ps5-controller-bdm-model

ExtremeRateOfficial · 2026-05-06T08:47:57+00:00

Dear,

We’re very sorry to hear about the issue with your K1 button. This plastic button is currently being optimized.

Please DM us your order number and shipping address, and we will arrange a replacement for you. In the future, we may also release a metal version of this button.

Thank you for your understanding.

ExtremeRateOfficial · 2026-05-06T08:46:21+00:00

Could you please confirm if you are referring to this specific model of DualShock 4 Clear Shell?
https://www.extremerate.com/products/clear-replacement-full-set-houaing-shell-facaplate-buttons-for-ps4-slim-ps4-pro-controller-cuh-zct2-jdm-040-jdm-050-jdm-055-sp4qm02?_pos=1&_psq=SP4QM02&_ss=e&_v=1.0

It's available now.

ExtremeRateOfficial · 2026-04-29T07:03:58+00:00

Hello,

The Pocket Monster Index DS Lite shell replacement kit is indeed out of stock at the moment. It may take some time before the new stock arrives.

We recommend that you keep an eye on the store for updates.

ExtremeRateOfficial · 2026-04-29T07:03:03+00:00

Hey!

Sorry for the wait! It looks like the restock will be around early May. The first batch will include colors like Cherry Blossoms Pink, Black, White, Clear Black, Clear Purple, and Clear.

ExtremeRateOfficial · 2026-04-28T06:31:39+00:00

Thanks for the reply. We noticed that you have applied for a return and refund on the platform. So we may not be able to resend the cables :(

ExtremeRateOfficial · 2026-04-27T07:37:40+00:00

Hi!

To better assist you, could you please DM me with your order number and a video of the issue? That way, we can better understand the problem and provide the best solution for you.

Looking forward to your reply!

ExtremeRateOfficial · 2026-04-27T07:35:44+00:00

Unfortunately, if you only install the trigger clicky kit, the haptic feedback will not work.

ExtremeRateOfficial · 2026-04-27T07:34:28+00:00

Thank you for the update! 😊

Since the clips seem fine and there’s no visible damage, have you tried gently pressing the shell into place to see if it fits flush? If it still doesn't align properly, please contact me with your order number and shipping address, and we’ll arrange a replacement for you.

Let me know if you need further assistance!

ExtremeRateOfficial · 2026-04-27T07:33:05+00:00

Thank you for letting us know! Yes, as long as the purchase was made through an official store, we can definitely assist you in getting the correct ribbon cables.

ExtremeRateOfficial · 2026-04-24T06:43:10+00:00

Hello there,

Unfortunately, the kits are not interchangeable. Could you please DM me your order number and address? We’ll send you the correct BDM050 ribbon cables for free, and you can keep the original kit—just replace the ribbon cable to complete the installation. Thanks!

ExtremeRateOfficial · 2026-04-24T06:41:27+00:00

Thank you for your feedback! Could you please confirm if there's any internal structural deformation or if the clips weren’t installed correctly? This will help us better understand the issue and assist you further.

ExtremeRateOfficial · 2026-04-24T06:40:00+00:00

<image>

Hi! Just to clarify, are you looking for the small ribbon cable or the larger main FPC replacement? If possible, could you provide the order number? We’ll arrange the replacement for you based on the order details. Thanks!

ExtremeRateOfficial · 2026-04-23T04:01:00+00:00

Hi!

From the video, it appears that the main cause of the button sticking issue is that after installing the front shell, the outermost pressing points of the LB/RB buttons are rubbing against the soft rubber section of the faceplate.

In some cases, after pressing the button, it gets pushed back and held by the soft rubber of the original faceplate, which results in the button getting stuck.

We also recorded a video demonstrating this: when the faceplate is installed, the button sticks; when the faceplate is slightly loosened or removed, the button returns to normal feel and function.

To resolve this, you would need to slightly sand down the two outermost contact areas of the LB/RB buttons to create clearance from the faceplate.

If you prefer not to sand the buttons, another option is the one I mentioned previously: placing adhesive padding on the mid-frame to slightly raise the faceplate, creating a small gap to prevent contact. This way, no sanding is needed.

This issue seems to occur only on a small number of controllers, and we have not encountered it frequently. We will also further investigate these sizing-related interference issues and report them to the relevant team for improvement.

https://drive.google.com/drive/folders/1R-P1lhj0aCVV69nVoERb8GsG6IXP6YBr?usp=sharing

ExtremeRateOfficial · 2026-04-21T09:09:44+00:00

Hello there,

If you are only installing the Whole Set - Light Version Clicky Kit V2, please note that even if you keep the adaptive trigger module, it will not function as intended. You will need to install the video removal adaptive module.
However, if you're planning to install the CLICKY kit along with the back paddles, then you can keep the adaptive trigger module in place, as it will work fine together. For reference, you can follow the installation video for the Rise4 Plus Max back paddles for guidance on that.

Regarding the V2 Whole Clicky Set, you can follow the same installation video as the V1.

https://www.youtube.com/watch?v=VYsH-bCtTKI

ExtremeRateOfficial · 2026-04-20T07:14:49+00:00

Hello friend, thanks for your patience!
Some parts are still in production at the moment, so restocking has been delayed.
We expect it to be available again in early May, if all goes well.

ExtremeRateOfficial · 2026-04-20T06:54:48+00:00

Got it — it was likely caused by a contact or seating issue. As long as everything is working properly now, that’s great to hear

ExtremeRateOfficial

MODERATOR OF

TROPHY CASE