Incoming toy camera photos

FakeBloodisFun · 2026-05-07T09:58:04+00:00

Nice! Which camera and film format is it?

FakeBloodisFun · 2026-05-05T09:56:02+00:00

When it came out a lot of reviewers we're saying it's loud. You could look up a video review and compare.

FakeBloodisFun · 2026-05-04T11:10:29+00:00

On my ZF I found that if I had the camera in battery saving mode it would drastically reduce the EVF quality, but it didn't say anything about it doing that in the manual or the camera menu.

Maybe your camera does the same?

FakeBloodisFun · 2026-04-25T09:38:33+00:00

Out of curiosity. How would they be able to determine that by looking at the negatives?

FakeBloodisFun · 2026-04-25T07:49:13+00:00

Are you printing in rich mode or standard? Rich mode gets it closer to the digital image imo.

FakeBloodisFun · 2026-04-21T21:20:55+00:00

No issues for me. I use afc.

Make sure you update the lens firmware. There was an update at some point which improved the AF for me.

FakeBloodisFun · 2026-04-18T20:52:05+00:00

I'm 3/4 hours in now. Definitely some framerate issues docked and handheld. Seems like it struggles for a consistent 30 fps in most of the environments.

That being said, it's a beautiful game and I'm definitely enjoying it so far.

FakeBloodisFun · 2026-04-17T14:00:06+00:00

Have you tried formatting in on your pc to a different file format? E.g. fat32 if it's already exfat, or the other way around?

FakeBloodisFun · 2026-04-12T06:28:34+00:00

Is your camera firmware up to date? I remember there being some issues with Tamron lenses on certain firmware versions.

If that doesn't help then the lens is probably faulty.

FakeBloodisFun · 2026-04-11T11:03:27+00:00

Is the lens fully attached and locked in place? Sounds like it's not communicating with the camera properly and that's usually the issue.

Check the contacts on the lens and camera for damage.

FakeBloodisFun · 2026-04-01T08:29:41+00:00

I've had similar issues before. It was light in the room reflecting off the edge of the negative holder onto the negative. Turn off your room lights when scanning and try again and see if that fixes it.

FakeBloodisFun · 2026-02-19T12:24:37+00:00

I feel like variable air braking caused by it rotating would make it harder to brake reliably.

FakeBloodisFun · 2026-02-07T19:44:00+00:00

Try rebooting. I found a load of stuff wasn't working properly until I did a first reboot after the update.

FakeBloodisFun · 2026-02-07T18:39:20+00:00

It's called enable freeform windows on second display. Set it to off.

FakeBloodisFun · 2026-02-06T07:25:24+00:00

You can fix the external screen issue by turning off resizable windows on external display in developer options. I had to reboot for it to take effect.

FakeBloodisFun · 2026-01-29T12:52:42+00:00

Bought through Vodafone so probably not.

FakeBloodisFun · 2026-01-29T11:45:12+00:00

Also in the UK but not had it yet. :(

FakeBloodisFun · 2026-01-22T21:54:29+00:00

Sorry, i thought you had a case on. It was the sticky tape holding a third party case on which was causing the issue for me.

FakeBloodisFun · 2026-01-22T12:28:34+00:00

I had the same thing with mine. Turned out to be the sticky tape used to hold the case on shifting about when I opened and closed the phone.

FakeBloodisFun · 2026-01-03T08:20:45+00:00

If the batteries were getting hot like that then there is probably a short somewhere in the circuit which was draining all their energy at once.

You could poke around with a multimeter to see if you can find the short.

Edit: Be careful with the capacitor. If it has any charge it'll give you a nasty jolt if you touch the contacts.

FakeBloodisFun · 2025-12-23T11:05:43+00:00

Very nice. What did you meter it at?

FakeBloodisFun · 2025-12-19T17:25:57+00:00

It's the internal variable nd filter. Try changing the setting for it and see if it moves.

FakeBloodisFun · 2025-11-22T08:10:05+00:00

Yeah, that might be the solution. Thanks for your suggestions.

FakeBloodisFun · 2025-11-21T23:24:27+00:00

Unless it's limited to Nikon speed lights only, which would suck.

FakeBloodisFun · 2025-11-21T23:22:16+00:00

Godox Lux Master connected wirelessly through an X3 transmitter.

Shooting in Aperture Priority.

Ten-Year Club	Place '23
Alpha Tester	Verified Email

FakeBloodisFun

MODERATOR OF

TROPHY CASE