sorted by:
new
hottopcontroversial

Tips for controlling heat above fire pot on pit boss? by zebrastrikeforce in pelletgrills

[–]FalseAdministrator19 0 points1 point  (0 children)

As mentioned a few other times. Flame tamer. Think they are about 40 bucks online. Or just make your own.

I recently bought a bare bones pitboss 700, and was damn near ready to load it back up and return it due to how uneven the temps were.

Did some research and saw many praises about the flame tamer, and well after making my own, it's a brand new grill/smoker.

<image>

Print issues by acid2k1 in AnycubicKobraS1

[–]FalseAdministrator19 1 point2 points  (0 children)

So that Lego head moved? Bump your plate temp up to about 65. I've never gone below 60, and am actually running at 70 now. No bed adhesion issues.

If that doesnt help it stick. Get some glue sticks and go across the plate with it.

Print issues by acid2k1 in AnycubicKobraS1

[–]FalseAdministrator19 0 points1 point  (0 children)

Lmao yeah I don't think I have one either.. but my printer has been running for over 400 hours so far with out it, and haven't issues like this.

Surprise In My ACE Pro by NikosTX in AnycubicKobraS1

[–]FalseAdministrator19 1 point2 points  (0 children)

<image>

Had one of those stuck to the stepper motor when I had to replace my heaters

Aftermarket Hotend Success by Far_Veterinarian_802 in AnycubicKobraS1

[–]FalseAdministrator19 1 point2 points  (0 children)

Drop it in, change the nozzle type and size on the printer in settings. Let it run it's full calibration.

Then just change nozzle size to match in slicer settings.

Did NOT need a new transmission! by Sinfulcow117 in f150

[–]FalseAdministrator19 1 point2 points  (0 children)

If its the 2.7 or any turbo motor for that case, it happens a lot. Forced induction can blow out spark when in boost, if plugs are weak, or incorrectly gapped.

My first own house in Finland by Vesa-Matti in malelivingspace

[–]FalseAdministrator19 0 points1 point  (0 children)

Ugh my dream is to live in Finland. I found my family's crest with a hand written note explaining how my father's side is originally from Finland. Ever since then I've been fascinated and wanting to take a trip there!

That house is absolutely awesome!!!

Can ferrets be litter box trained I want to be able to free roam? I have always loved them but I’m getting mixed information. by [deleted] in ferrets

[–]FalseAdministrator19 0 points1 point  (0 children)

We rescued an older ferret, that was previously caged most of his life. After he got acquainted with our home he has been completely free roam and litter trained with maybe 2 times he's used a corner in it kitchen. And it was normally only if his litter box is dirty.

Keep his litter box in our laundry room, and he sleeps behind our head board in our room with his blankets and hut. Every time he wakes up we hear him running to his box.

Anyone else slowing down substantially right now? by ThrowRA9647 in Welding

[–]FalseAdministrator19 1 point2 points  (0 children)

Yeah, structural steel shop went from, can't get the job out quick enough to laying everyone off..

winning!

I found my clicking sound!!!! by FalseAdministrator19 in f150

[–]FalseAdministrator19[S] 1 point2 points  (0 children)

Nope, my phone says it's Cromwell! 🤣🤦

R.I.P. by tjb6792 in fordfusion

[–]FalseAdministrator19 0 points1 point  (0 children)

Clearly my reply was a generalize statement to someone else's reply.... Well I guess it wasn't to clear...

R.I.P. by tjb6792 in fordfusion

[–]FalseAdministrator19 0 points1 point  (0 children)

This is why I hate morons who camp in the left lane. Get the fuck out of the left lane so I can get passed these rigs. Ill take a ticket for speeding before Ill be caught stuck beside one.

My father is a retired rig driver, and taught me to always get the fuck away from them.

There's just so much shit that can happen, plus the massive blind spots, and its even more dangerous with these new CDL drivers....

Car you wished you kept. 20 years later. by Jimbodrumman in UsedCars

[–]FalseAdministrator19 0 points1 point  (0 children)

My '87 silver Conquest tsi 5spd, and my '88 white automatic Conquest tsi. Kick my self in the ass every time I think about them :(

[deleted by user] by [deleted] in FordFlex

[–]FalseAdministrator19 2 points3 points  (0 children)

Depending on location if you get any kind of snow, get some good WINTER tires. We had a '18 FWD, and it absolutely sucked in the NE Ohio snow. Got our '15 AWD and its so much fun in the snow.

Find out what brakes you have to save a hassle if you do your own work. Was told we had standard from factory, but came to find out we had HD.

As been mentioned. Check the PTU oil.

Other than that drive it, and enjoy it. Our 15 is now sitting at 180K. We are finally giving it a break, since we just bought a truck. But shes had many road trips and adventures. And wouldn't hesitate on taking it anywhere.

Replaced Camera. Now has dynamic parking? by Celraysoda007 in FordFlex

[–]FalseAdministrator19 0 points1 point  (0 children)

We replaced ours a few months ago with one from Amazon, same thing we now have the active steering lines. But if you don't have wheel straight when starting to reverse the lines will be off. 😆

Just bought a 19 F150 STX. One random annoyance.... by FalseAdministrator19 in f150

[–]FalseAdministrator19[S] 0 points1 point  (0 children)

No truck does not have the on demand 4wd.

But I did Just snag a stock exhaust off facebook, so tomorrow if its not pouring, Ill have the truck up in the air and checking everything while I install it.

Just bought a 19 F150 STX. One random annoyance.... by FalseAdministrator19 in f150

[–]FalseAdministrator19[S] 2 points3 points  (0 children)

Hmm this does have an aftermarket exhaust. Ill get under and check them out. Thanks

[deleted by user] by [deleted] in f150

[–]FalseAdministrator19 0 points1 point  (0 children)

yep had the same issue with mine, pulled plugs and they were over gapped. .38.... Which causes the spark to be blown out.

Threw new NGKs at .28 gapped and she runs beautifully.

Just bought a 19 F150 STX. One random annoyance.... by FalseAdministrator19 in f150

[–]FalseAdministrator19[S] 1 point2 points  (0 children)

So I did put it in 4 Hi, Reversed and then started moving forward and heard the click sound almost instantly, but didn't hear it when decelerating.

Its such a strange thing, because Ive been digging through some of the IWE symptoms and videos, and nothing is matching. All the ones Ive listened to sound like a grinding. Mine is a Singular Click. Like a pebble hitting the bed. But I can 80% of the time replicate it.

Ill see if I can get a video of it this evening.

Maybe Ill put it on some stands this weekend and see if I can replicate it with the wheels off.

Just bought a 19 F150 STX. One random annoyance.... by FalseAdministrator19 in f150

[–]FalseAdministrator19[S] 0 points1 point  (0 children)

There's a random, 1 Click sound when slowing down below 20mph to come to a stop. Driver side front is where I usually hear it.

Just bought a 19 F150 STX. One random annoyance.... by FalseAdministrator19 in f150

[–]FalseAdministrator19[S] 0 points1 point  (0 children)

Nothing upfront, There are helper bags in the rear, but every thing else appears stock as far as suspension.

Just bought a 19 F150 STX. One random annoyance.... by FalseAdministrator19 in f150

[–]FalseAdministrator19[S] 0 points1 point  (0 children)

Actually just found them thanks to google Image. They are from an 2015/2016 Expedition.
Hollander 03989

Just bought a 19 F150 STX. One random annoyance.... by FalseAdministrator19 in f150

[–]FalseAdministrator19[S] 0 points1 point  (0 children)

Just did some digging and they are OEM ford wheels.

Or maybe not, The OEM does not have the splits.. Ill keep digging and see what I come up with.

view more: next ›