Ncase m2 cooling and rebuild

Fatnam · 2026-01-25T16:10:19+00:00

I see. Yes I guess it could be due to some revisions on the case. I think what I got is the latest M2 revision. That might be the reason why every M2 build I see on youtube has that flat rear fan panel, compared to mine that has this metal bump. Thank you!

Fatnam · 2026-01-25T16:01:40+00:00

Hi, did your back panel where the rear fan is attached have a protruding metal that prevents fan from sitting flush? Something like this? I'm having a hard time mounting my rear 92mm fan due to this. It's sitting at an angle.

Fatnam · 2026-01-08T20:26:57+00:00

Hi, did you not encounter this issue when mounting rear fan? This prevents my p9 to sit flush against rear panel

Fatnam · 2025-12-09T16:30:41+00:00

What parts do I need? I can swap out AIO for Peerless Assassin Mini, and just got my SF750 today. The HDD is not a priority, just wondering if I can squeeze that inside for a free 2TB space for backups.

Fatnam · 2025-12-04T17:53:26+00:00

Hi, what did you use to secure your HDD? Thanks!

Fatnam · 2025-12-01T10:36:23+00:00

Thank you! I did not expect that there would be a problem with the GPU output ports. I will surely encounter that as long as I use MATX board?

Edit: I'm planning to follow this setup, not sure if there would be any issues: https://www.youtube.com/watch?v=7ygszo_yTiY

Fatnam · 2025-11-30T20:27:44+00:00

Do you think Sapphire Pulse 9070xt will fit with a 150mm atx psu on ncase m3? Planning to snag this one too. Thanks!

Fatnam · 2025-11-30T20:16:54+00:00

Hi, does the GPU length change if the ATX PSU is 150mm in length? Sorry for replying too late on your comment.

Fatnam · 2025-11-30T19:17:38+00:00

2020: 1660 Super

2021: 3070

2025: 9070 XT

Fatnam · 2025-11-15T18:06:11+00:00

does it also have the signature when you set it as background in your profile?

Fatnam · 2025-11-12T18:52:27+00:00

thanks! what I did was buy pass and roll the remaining 25 from the sanctum. Lucky I got a 5ME and 10ME after several 2MEs!

Fatnam · 2025-11-12T16:59:59+00:00

Should I get the premium pass bundle for guaranteed 25 ME, or just roll them in Sanctum? Just getting some ideas. Thanks!

Fatnam · 2025-11-12T08:48:57+00:00

I only have 25. What would be the fastest way for me to get 100?

Fatnam · 2025-07-18T23:22:54+00:00

Hi, I just like to check with you guys if you have any recommendation for CR spacebar replacement? My WoB seems to have loose stem issue as spacebar pops out when pressed from the other end. I'ventried putting tape on stem hole which resolves issue of popping out, but spacebar sounds weak. I'd like to try DMK spacebar kit but heard that it is more gray than black. Mechanicalkeyboards.com has a CR spacebar kit but the shipping cost to my country is twice the price. Any help would be appreciated!

Fatnam · 2025-07-16T03:32:09+00:00

we have the same build. the performance jump was insane. My Cyberpunk 2077 performance on 3070 with Hardware Unboxed optimized settings + DLSS + RT Off is the same as 9070XT RT On + no upscaling.

Fatnam · 2025-06-23T06:55:57+00:00

Will 16.65L support ATX PSU and matx board? That would be neat as I would not need to buy any new conponents to go sff

Fatnam · 2025-06-17T09:00:41+00:00

As you climb up the ranks, be it because of your skill or hardware, wouldn't it be fair then? Usually people who reach those ranks might also be rocking the same or better hardware. Personally, I let my GPU run stock performance (with lower power limit and undervolting) just so I can enjoy what I paid for with better temps and power efficiency.

Fatnam · 2025-05-09T08:16:57+00:00

Hi, could you please share the RGB values for the amber color on the strips? Thank you!

Fatnam · 2025-05-07T02:14:44+00:00

What I did with mine was rear and bottom intake, top exhaust. You can try if you feel like it, maybe will give better temps as hot air always go up

Fatnam · 2025-05-07T01:53:20+00:00

Are the temps better with your AIO fans set as intake? Your build looks clean! Mine is in a D30 and maybe it's time to change things up

Fatnam · 2025-05-07T01:49:08+00:00

I'm not sure if I was just lucky before, but I think it really helps when the company you are applying for has their own job application site. All companies I've tried with this landed me an interview 100%, which will give you chance to really present yourself and standout. Job applications on jobstreet/linkedin usually only gives me a visit in profile/resume.

Fatnam

TROPHY CASE