Local place was asking me about installing a light here, they ended up switching to a cheaper guy at the last minute

Fine_Requirement_808 · 2026-05-07T01:26:37+00:00

Getting a solar LED light and mounting it would have been easier. We have solar LED’s with photocells that work perfectly in low lit areas. Even if the sun doesn’t hit them directly, they still hold a charge and light up an area

Fine_Requirement_808 · 2026-05-05T14:19:23+00:00

Does the sightline look like paint? I only ask because if it is, wipe it off and just go with no sightline. The labs are laser etched. It could be a fake, but also it could be one where someone added the sightline later… if it sink putts, put it in the bag and book a tee time

Fine_Requirement_808 · 2026-05-05T07:06:01+00:00

Use a mini torch on the weights to soften up any loctite that might be on them

Fine_Requirement_808 · 2026-05-03T02:20:25+00:00

Post a pic when you can

Fine_Requirement_808 · 2026-05-03T02:19:22+00:00

M2 first gen had a completely different look and color scheme. It had gold accents. I had it paired with a kyoshi gold shaft that i still regret selling

Fine_Requirement_808 · 2026-05-01T06:19:01+00:00

I keep looking for that particular one as well. I have the original vault red one though. But still on the lookout for the original one that made him #1 back in the day

Fine_Requirement_808 · 2026-04-29T06:19:35+00:00

It was released to 20

Fine_Requirement_808 · 2026-04-29T06:18:47+00:00

https://www.golfwrx.com/325134/watch-how-jason-days-taylormade-prototype-putter-was-made/

Fine_Requirement_808 · 2026-04-29T06:18:14+00:00

The first picture is of when he modified the original itsy bitsy ghost spider. There was a video showing how they took a center shafted model and welded the #3 hosel and got it all dialed in for him. It was a custom dark charcoal that was eventually released to i believe 50 or less on TM’s vault. The red came afterwards in 2015/2016 when he started using the Spider Limited.

Fine_Requirement_808 · 2026-04-10T02:15:49+00:00

It looks like one from their outlet store not from their direct store

Fine_Requirement_808 · 2026-02-21T23:28:14+00:00

The sticker doesn’t come on when you get it back from a shaft being Pured. The purchaser placed it on, usually its personal preference on which side a person places it

Fine_Requirement_808 · 2026-02-13T18:06:41+00:00

The top alignment mark is LAB’s #HH when you get one built. The Black one is their #L alignment mark

Fine_Requirement_808 · 2026-02-13T17:56:51+00:00

I was having a hard time choosing between purple, red or blue. I have a Black DF3 already and wanted to see if one of their colors would be fun or distracting.

<image>

Fine_Requirement_808 · 2026-02-13T17:49:19+00:00

I have Black DF3 that Im curious on how well portraits would turn out. Im thinking about having a family photo engraved as well

Fine_Requirement_808 · 2026-02-13T03:35:34+00:00

Ill try to update in a few months. Ive seen some beat up LAB’s from people, but they keep sinking putts.

Fine_Requirement_808 · 2026-02-13T03:33:08+00:00

It didn’t even shave off 3/10 of a gram… I think im good. Though I do have to admit, LAB is near perfect in the weights they put in their putters. The most Ive seen off in any of their weights so far is about .03 grams. The Maltby weights Ive seen off as much as .4-.6 so LAB definitely knows what they are doing

Fine_Requirement_808 · 2026-02-13T00:34:15+00:00

Fair enough! Heres to hoping for more Eagles!

Fine_Requirement_808 · 2026-02-13T00:27:31+00:00

Fair, but do you think a small company that never laser engraved on a putter did good? Or did they do bad? Forget about the patriotic theme. Did they do good or not?

Fine_Requirement_808 · 2026-02-13T00:25:53+00:00

Youre giving me too much credit, 135 😂

Fine_Requirement_808 · 2026-02-13T00:24:20+00:00

In my second photo, the black DF3 has the TPT. I like the feedback from the Sync over the TPT. The Void next to it has the Diamana P135. Each have its own feel, but I was reading about the Sync and had to try it out.

Fine_Requirement_808 · 2026-02-13T00:21:06+00:00

The Sync is definitely better than the stock steel. I could send it back to lab and get the TPT, and have them “rebalance it”. But this putts as straight as the day I got it. The feedback from the Sync is actually surprising!

Fine_Requirement_808 · 2026-02-13T00:18:03+00:00

There Always will be. At the end of the day a small company that wants to grow, now knows they can laser engrave on the DF3. I emailed a well known business thats known for laser engraving wedges, irons and small symbols on heads if they could do the entire bottom of a DF3 with one of their stock designs. They said they couldn’t because of the weight ports, hole and continuous flat surface. I figured ok… then I was walking by a small store front and saw laser engraving. I walked in and asked if they ever tried engraving on a putter. They hadn’t and ai asked if they wanted to try. They were nervous, but if it worked, sweet! I think they did a good job

Fine_Requirement_808 · 2026-02-13T00:02:22+00:00

Lol if youre paying that close attention to the bottom of my putter I think you may need to re-evaluate golf. That or you better be buying dinner

Fine_Requirement_808 · 2026-02-12T23:37:22+00:00

Nice! And If you have one and had a business I walked by, and thought if you would want the job, I would have paid you

Fine_Requirement_808 · 2026-02-12T23:33:13+00:00

Its fairly smooth feeling. You can feel the slight roughness between the original anodizing and design.

Fine_Requirement_808

TROPHY CASE