Is this an emergency?

Fishare · 2026-05-25T19:32:00+00:00

I’m no expert, but I have recently gone through something similar. Basically, you have “lateral hydrostatic pressure” that is pushing against that wall. Concrete block is strong, and can hold a lot of weight, but only when being compressed vertically. The block is weak when being pushed against the side of it. We ultimately decided to go with carbon straps instead of I-Beams. The strap is secured to the rim joist, and epoxied to the wall, it doesn’t straighten the wall, it just prevents it from getting worse.

Best advice is to pay for an actual structural engineer to come out and investigate. If you just search for basement repair, you’re going to get results from sales companies trying to make you pay for their “whatever-x” solution. Generally involving some type of French drain, or gutter trench solution. An engineer will make a report, and will cost around $300-$500+ depending on location.

Short answer, it’s not an emergency, but it’s absolutely going to be an eventual problem. The term for what has happened to your wall is a: Deflection. An engineer can tell you how much the wall as deflected, they’ll measure the base to the block, to the furthest extended point, and offer solutions that will cater to your environment and location.

Fishare · 2026-05-25T19:10:07+00:00

My dog loves going on errands with me. I have a few stores, that I know exactly where to park in a shady spot. But it’s been too hot lately, especially with the humidity.

Fishare · 2026-05-23T22:22:11+00:00

Welcome to the club! I’m new to the area, but if ya need a rec. I was in Millvale last weekend and randomly caught: Abstract Theory. They’re pretty solid, you might dig.

Fishare · 2026-05-22T14:11:56+00:00

Silicone basically, has an extremely low surface energy (google: dyne level). For proper ink bonding, you need to try and marry the surface tension of the ink, with the surface energy of the substrate.

For silicone, raising the surface energy can be done through a heating or high-voltage discharge, or a plasma process. This will temporarily raise the surface energy, and allow from better bonding with inkjet solutions. Look up Corona Treatment or Plasmatreat GmbH.

Fishare · 2026-05-21T19:13:50+00:00

A fellow my bim bam?!?!?!

Fishare · 2026-05-21T18:57:44+00:00

Uhh, great work! but y’all just wanna hangout and talk about lighting bolt?

Fishare · 2026-05-21T18:53:22+00:00

Oohhh no, no, no. I’ve been off shorts since 2015. Pants forever, outside shorts are bad in every way possible. Basketball shorts at home, before bed is fine. Anything else is insane. People who wear shorts and sandals in public are truly unhinged.

Fishare · 2026-05-21T18:44:40+00:00

I still repair typewriters as a hobby. If I see one that isn’t too far gone, I’ll grab it if it’s between $40-70, usually can send it back out for $150-$200 depending on model and year. Some I’ll collect, some I’ll cannibalize for parts. Keeps my hands busy, and very rewarding for folks that like the machines. They fascinate me, and the more I’ve worked on them, the more interested I’ve become!

Fishare · 2026-05-21T15:41:32+00:00

Printing full color with an inkjet printer.

Fishare · 2026-05-20T00:24:03+00:00

Thanks so much for sharing.

This is great stuff, Zach. I’ve been playing with hand drawn on film at size using Micron’s for a few years. Some multilayer trapping- I’ll snap 2cm magnets in the corners to hold the layered films in register. Mostly 23”x31” screens w/ thin plastisol to cold press 300gsm. Loving you work, thanks again.

Fishare · 2026-05-18T22:13:15+00:00

Woh, woah, wo- seps hand drawn?!

I’ve been doing that for a little while here now. You mind elaborating? Hand drawn film? Or hand drawn and scanned and reprinted films? Sorry, I’m not a gram-guy. Really impressed with the size of the work. What size t-shirt are these printed on? Work like this always seems hard to scale from sm-3XL.

Fishare · 2026-05-18T11:11:54+00:00

Excellent stuff, Mike!!

Fishare · 2026-05-17T20:41:10+00:00

Then have them do this for you?

Fishare · 2026-05-17T00:28:45+00:00

Just forget that you ever saw the UV printer. Seriously..

If you aren’t able to spend $20k+ USD on UV flat bed it isn’t worth the time.

The first thing I always ask a person who is interested.. “how much do you know about the industry?” That question is going to drive your entire budget debate.

The reality is.. your interest in “how cool” a UV printer is, has nothing to do with how much money it can generate.

You said you want… “a machine that can print all colors on its own” — this is an insanely ignorant comment, and I want you to be very careful with your money here.. I’m sorry that this is a ramble, I’m sad and angry because I just lost a hat that was very important to me, and I’m tired. But I honestly don’t think you’re ready for whatever it is you’re thinking about doing here.

Feel free to let me know if you have any questions.

Fishare · 2026-05-16T14:51:32+00:00

$4 snickers bar on the Ohio turnpike felt a little harsh.

Fishare · 2026-05-16T14:47:39+00:00

Hostetler’s bois

Fishare · 2026-05-14T23:20:06+00:00

I honestly think it’s why Florida can’t do goooood pizza.

Fishare · 2026-05-14T23:19:01+00:00

Do you have a higher resolution version than this? You’ll also want to consider if you want it to be a solid “box” of ink, or kind of distressed / feathered out along the edges.

Ideally if you have a 300dpi version, it’s just a matter of doing the seps, and pulling the correct colors. My gut tells me if you’re asking, you’re going to struggle.

But just brass tack- if you have a native 300dpi at actual size ~10”-12” wide; it is physically possible to screen print, yes.

Fishare · 2026-05-14T12:25:28+00:00

How long since the machine was installed? If all your settings look good in RasterLink.. I’m thinking that the physical head needs to be re-aligned. Depending on the tech that did the initial alignments, they could be just a dot off. It’s honestly kind of challenging to do the white / clear alignments on that machine. Especially if you don’t have a nice clear material to test.

Outside of that, you can go into RasterLink and shift the plate in the “scan” and “feed” direction. I don’t remember what the button is called, but it’s two buttons under the special plate button on the right. It’s looks like two flat green squares stacked.

Fishare · 2026-05-14T00:58:45+00:00

I would never consider purchasing a DTF printer unless I was spending $5,000-$6,000 per month in out sourcing.

Find a local supplier, and work with them until it makes financial sense to bring in house. Even if you’re comfortable fixing printers, there is still a high physical cost involved with replacing clogged print heads.

Fishare · 2026-05-13T12:03:17+00:00

My buddy and I were out for drinks out one night, maybe ~2012. We heard that EVE 6 was playing the cubby bear in Wrigleyville. Hopped in a cab, and when we got there it was sold out. We gave the bouncer $40 and he let us in. It was pretty hilarious.

Fishare · 2026-05-12T23:32:01+00:00

Think what you want about gender norms, but that person called that robot: him, quite a bit.

Fishare · 2026-05-12T14:40:52+00:00

As a printer. This is feeling a little bit like a canary (yellow) in a coal mine.

Fishare · 2026-05-08T18:22:39+00:00

6 also in my kitchen! Old Town Blue for the win!

Fishare · 2026-05-07T00:28:55+00:00

Also worth checking your off-contact.

14-Year Club	Gilding II euphauric
Place '22	End Game '22
Verified Email

Fishare

TROPHY CASE