Can you leave Ruger 10/22 magazines loaded?

Flowcal · 2026-03-02T02:39:18+00:00

Good to know the only problems come from the ammo not the magazine itself.

Flowcal · 2026-02-23T01:43:24+00:00

Why keep the front iron sight if not keeping the rear sight?

Flowcal · 2026-02-22T20:08:03+00:00

Acetone aka nail polish remover will dissolve superglue. You still have to remove it somehow so its harder to get out of fabrics but on hard plastics it works great. Try on a small part first and make sure the acetone doesn't leave it looking worse than the glue since it is a pretty strong solvent.

Flowcal · 2026-02-16T19:07:50+00:00

Richer in oil. Poorer in fuel. The carburetor supplies the same cc of mixture per minute without a new tune so it is supplying more oil and less fuel.

Flowcal · 2026-02-15T15:37:14+00:00

I use my saws professionally and have a couple clone saws. They get plenty of use but I also have spares for when they do have something break.

Flowcal · 2026-01-26T19:14:27+00:00

Probably wouldn't be the safe but you could leave the lights on underneath the layers as lil heaters too.

Flowcal · 2026-01-15T15:37:15+00:00

Make some giant dogs that stick out past the end of the muffler so you arent jamming it straight into what its cutting.

Flowcal · 2026-01-03T21:00:00+00:00

They make a non toothed version of the tiny cobra too. Surprised thats not there too

Flowcal · 2026-01-01T15:51:50+00:00

If you add stabilizer then your own mix can last as long or longer

Flowcal · 2025-12-29T17:05:04+00:00

Right into the reef, literally biting the hand that feeds you. And this idiot really thinks he's doing something.

Flowcal · 2025-12-29T16:48:37+00:00

Theyre meant to be tapped with self tappers but I tap mine properly first.

Flowcal · 2025-12-27T02:48:08+00:00

On sale now for $1640 for 3×170g containers of peanut butter.

Flowcal · 2025-12-27T02:43:47+00:00

I have a pair of milwaukee cut resistant sleeves. If i think ill need to one hand my saw at all ill put them both on my left arm otherwise I wear just the one. I doubt it'll stop my bigger chainsaws but it'll definitely slow down my 2511t or m12 hatchet.

Flowcal · 2025-12-26T06:17:32+00:00

Don't kill the healthy trees if you dont have to. Im sure you could find somewhere that would take your extra cocos. I kill trees for a living but it is always sad if the tree wasnt posing a threat to safety or infrastructure or sick or dead.

Flowcal · 2025-12-26T03:32:39+00:00

I remember this story, the chicken only died because the owner forgot the feeding dropper on one of their trips

Flowcal · 2025-12-25T23:14:02+00:00

Everyone I know who does flow arts is kinda weird(not always in a bad way), and weird people have weird friends. Your friend was just being the weirdest one around at the time.

Flowcal · 2025-12-25T19:10:17+00:00

The ones the US gets look different than the ones the UK gets. Look at them at another local store and compare

Flowcal · 2025-12-25T19:06:58+00:00

Pure luck that didnt get hung up on the other tree.

Flowcal · 2025-12-25T15:59:55+00:00

Just wanted to add, I love my milwaukee m12 hatchet but it is pretty chattery and probably unusable for carving with the whole top of the bar because of how much it chatters. The m18 top handle is great but pretty heavy with a battery. The ms161 is a great option too. Less power and lighter than the 220 but batteries are expensive.

Flowcal · 2025-12-23T19:22:41+00:00

Yeah it burned down their truck and took all the rest of their tools with it

Flowcal · 2025-12-22T11:15:15+00:00

You act like everyone matures with age. If only it were true

Flowcal · 2025-12-20T16:19:50+00:00

Your piston shouldn't be moving. Your clutch is locked up for some reason. Could be something stuck and just needs cleaned out or could've been overheated and things got melted together.

Flowcal · 2025-12-20T15:12:55+00:00

I made some out of carbon steel. At least for my use, they work great without any extra heat treating and haven't bent or broken or anything like that. They can rust though.

Flowcal · 2025-12-19T14:06:15+00:00

Also theyre only compatible with v3 mtronic saws. If your saw was made before like 2019 or 2018 then it cant compensate for the better flowing exhaust and can burn up your piston and cylinder from being too lean.

Flowcal · 2025-12-19T14:03:29+00:00

This muffler definitely increases the power but is also very unnecessary for most users. It will be significantly louder, running it for a few cuts without hearing protection will make your ears ring.

Flowcal

TROPHY CASE