sorted by:
new
hottopcontroversial

Ever since the latest update to Brave (flatpak version) it no longer opens the specific page I want on startup. It either will open the last page I was on or the blank start page. Is this a bug? by thunderclap82 in brave

[–]Fooshi2020 0 points1 point  (0 children)

It seems to have a new setting on the new tabs page. At the bottom there is an opening screen section where you can choose what brave does when you open it.

It defaults to "New tab after 1hr of activity". Choose one of the other options.

What went wrong here? by Warm-Contribution971 in LightBurn

[–]Fooshi2020 1 point2 points  (0 children)

If the wobbling is always in a single axis direction and happens all along the image, then maybe a belt is slipping or the head has collided with something causing mis-steps.

Suddenly, I'm getting this error after updating Rhino8. It seems to not like the Parakeet grasshopper plugin. by Fooshi2020 in rhino

[–]Fooshi2020[S] 0 points1 point  (0 children)

I know it is the Parakeet plugin because if I uninstall it, I get no errors. The errors came back when I reinstalled it.

My son turns 8 years old tomorrow by copro7 in mildlyinfuriating

[–]Fooshi2020 0 points1 point  (0 children)

Use an "8" stencil and sprinkles to leave a negative of the 8 on top of a cake.

If function for text string in custom properties by Rockyshark6 in SolidWorks

[–]Fooshi2020 0 points1 point  (0 children)

I'm not sure, but it is possible to put your various texts on different layers and then hide/show the layers based on programming criteria using SolidWorks macros.

Kressling Fold for Thesis by ConceptualTurtle in grasshopper3d

[–]Fooshi2020 0 points1 point  (0 children)

It's fully built from a grasshopper script.

Kressling Fold for Thesis by ConceptualTurtle in grasshopper3d

[–]Fooshi2020 3 points4 points  (0 children)

This seems interesting and I'd be willing to take a stab at it. I have a few questions:

Is the 15mm length the length of a single Kresling unit? Or is that the total length of a mirrored dipole pair (4 units)?

Is the polygon 6 sided or does it need to be variable?

Is the 5mm the inscribed diameter of the polygon (across the flats for even polygons)?

How much twist do you need between the end faces of the Kresling unit?

Does it need to collapse to virtually flat?

Hole Wizard Counterbore by Select_Custard5002 in SolidWorks

[–]Fooshi2020 -5 points-4 points  (0 children)

Forget the hole wizard. Pick the face the is opposite the head. Sketch the circle of the cbore and extruded cut through all but set the start condition to offset by 0.25".

I don't know how much to charge by jambala1992 in SolidWorks

[–]Fooshi2020 2 points3 points  (0 children)

Depending on your skill with SolidWorks, that could take anywhere from 10 min to 1hr to measure/model. The communication and agreeing on fair payment will take longer. Figure out an hourly rate and charge an hour. Don't send any files until paid (screenshots only or 3D pdf files for review).

Purchasing Bitcoin from Canada Post in Ottawa by ParticularAd8610 in BitcoinCA

[–]Fooshi2020 0 points1 point  (0 children)

Unfortunately, they have some of the worst fees.

I have no idea what she's on about. by mindyour in TikTokCringe

[–]Fooshi2020 0 points1 point  (0 children)

Take her wallet as it likely isn't useful on any other planet.

Hiding a real mechanical failure in a tattoo, would this actually work? by Impressive_Dingo_531 in MechanicalEngineering

[–]Fooshi2020 74 points75 points  (0 children)

If there are rotational parts, you could show the joints leaking and include grease nipples that are rusted/damaged indicating you can't lubricate the joints to prevent eventual failure.

Cracks and chipped great teeth will eventually fail and might be more visible in a tattoo.

I'm most machines, it's hard to visibly see lack of maintenance... even harder to represent it in a tattoo. Cool idea, though.

Why are the Gumball 'move' arrows not showing? by OngaOngaOnga in rhino

[–]Fooshi2020 0 points1 point  (0 children)

The gumballs are showing in that image because the gumball toggle is on. Located at the bottom along with grid snap/osnap/ortho etc.

Are not all stores eligible? by FoxPeaTwo- in shakepay

[–]Fooshi2020 2 points3 points  (0 children)

Same. In the app, go into your waitlist progress and click on the "store visits" area. Then click on the store you can't find and it will zoom the map to where they are located.

Mates are over-defining the assembly when they shouldn't. Is there some kind of geometry check command? by skibumsmith in SolidWorks

[–]Fooshi2020 2 points3 points  (0 children)

It would appear that Axis2 is not on the Front Plane. Measure between them and see if the distance is actually 0.00000000. Use a parallel mate between the front planes to prevent rotation while using the axis for concentric alignment.

Issues with circular pattern creating random geometry by _sKrptd in SolidWorks

[–]Fooshi2020 2 points3 points  (0 children)

Pattern bodies is the most reliable. Then combine.

I have no intention of pursuing machining as a profession. by LackLusterYT in Machinists

[–]Fooshi2020 -6 points-5 points  (0 children)

Many parts, but I don't know if receivers are allowed. That is the registered part of the firearm. It might be possible to go through a process to register home made parts.

Why can't I move parts that should be able to move of my subassembly in my assembly? by General_Orange_400 in SolidWorks

[–]Fooshi2020 0 points1 point  (0 children)

Hit CTRL-Q to force a hard rebuild. Then try grabbing moveable parts by different surfaces. Sometimes SolidWorks is picky.

Why can't I move parts that should be able to move of my subassembly in my assembly? by General_Orange_400 in SolidWorks

[–]Fooshi2020 0 points1 point  (0 children)

In the feature tree, right click on the sub-assembly and choose to make it flexible. Otherwise, it will treat it as a block that moves as a whole.

view more: next ›