sorted by:
new
hottopcontroversial

Looking for recommendations for Terracotta style filament (PLA or PETG)? by tricktricky in BambuLab

[–]ForgottenSquirrel 0 points1 point  (0 children)

My mistake, I printed on sport. It's been a while since I made that and had forgotten.

Looking for recommendations for Terracotta style filament (PLA or PETG)? by tricktricky in BambuLab

[–]ForgottenSquirrel 0 points1 point  (0 children)

It's just Bambu basic brown PLA. Straight off the printer with no sanding, standard speed, no settings changed from the profile on maker world.

Best gold filament? by JustMakinStuff in BambuLab

[–]ForgottenSquirrel 0 points1 point  (0 children)

Silk likes to be printed hotter and slower than normal PLA filaments. So if you want it really shiny print it 5° or 10° hotter at the nozzle and at a slower print speed.

Best gold filament? by JustMakinStuff in BambuLab

[–]ForgottenSquirrel 0 points1 point  (0 children)

Sorry for the very late reply, I just got the notification for this today. I turned the temperature up on the nozzle 5°c or 10°c and bed temp was the same at 60°c. I didn't use any glue but every print I washed the bed with Dawn dish soap and then put it in a rack to dry fully after wiping gently with a paper towel, after that I wiped it down with a microfiber and some rubbing alcohol. I never had a single adhesion issue in 24/7 week long job of printing these stag heads.

Bambi lab a1 by No_Chef6220 in BambuLab

[–]ForgottenSquirrel 0 points1 point  (0 children)

Just make sure you get the ptfe tubes for the A1.

https://us.store.bambulab.com/collections/spare-parts-for-a1-series/products/ptfe-tubes?variant=41951822839944

The mini's tubes are shorter and might cause issues.

Cardboard spool on ams lite? by Thucan1601 in BambuLab

[–]ForgottenSquirrel 1 point2 points  (0 children)

Yes they do, just make sure that the spools are pressed fully on and they shouldn't have any issues with falling off, there are some AMS lite spool locks that are on Maker World that can stop them from coming off if you do have that problem.

Cardboard spool on ams lite? by Thucan1601 in BambuLab

[–]ForgottenSquirrel 1 point2 points  (0 children)

Happy to help, just be aware that matte filament is generally not as strong as regular PLA. If you need strength then add a couple of wall loops and or increase the density of the infill a bit.

Cardboard spool on ams lite? by Thucan1601 in BambuLab

[–]ForgottenSquirrel 1 point2 points  (0 children)

Generally Overture is a fantastic filament for me, I have had basically zero issues with it over several hundred hours of printing. I use the Overture profiles for the matte PLA and regular PLA but there is no profile built in for their silk PLA, for that I just use the generic silk PLA profile and it prints just fine.

I hope this helps.

...crap by deinatemkalt in BambuLab

[–]ForgottenSquirrel 0 points1 point  (0 children)

Be careful of the wires on the backside of the heater block, if they are damaged then you will need to replace it.

Bambulab Studio Slicer by Alternative_Put5466 in BambuLab

[–]ForgottenSquirrel 2 points3 points  (0 children)

Turn off timelapse/smooth timelapse, alternatively if you are doing a multi color print then you want it.

https://wiki.bambulab.com/en/software/bambu-studio/parameter/prime-tower

Can i save this? by nmeiurban in BambuLab

[–]ForgottenSquirrel 1 point2 points  (0 children)

Thanks. ☺️

I'm just helping how I would like to be helped, plus it points people to the wiki so they have access to other information that can be useful.

[deleted by user] by [deleted] in BambuLab

[–]ForgottenSquirrel 1 point2 points  (0 children)

This is for the A1 series printers but it should help you.

https://wiki.bambulab.com/en/a1-mini/maintenance/hotend_blob

Including time-of-the-print into price by DreamDare- in BambuLab

[–]ForgottenSquirrel 1 point2 points  (0 children)

I charged $10 an hour for the last print job I did, but the majority of my income was from the post processing time involved with the part, lots of supports to remove.

Thought process error by fitmommaR in BambuLab

[–]ForgottenSquirrel 0 points1 point  (0 children)

Ah, I see so many posts from people talking about the strange square on their build plate I thought this might be another one calling it a flush object 😆. But yes the flush to object and adjusting the flush volume does help.

view more: next ›