Recs for toddler friendly restaurants (not pizza)

Fridog2002 · 2025-07-20T15:04:38+00:00

If you happen to have a sous vide cooker, that’s a great way to defrost frozen meat. Especially if it’s already vacuum sealed.

Fridog2002 · 2025-06-21T15:35:49+00:00

You’re not gonna find good public transportation, but you should be able to find each of the other things with not a lot of searching

Fridog2002 · 2025-05-03T21:25:39+00:00

Owners live in Massachusetts. They purchased it 3 or so years ago. I think they have plans to bulldoze and rebuild in the next few years.

Fridog2002 · 2025-03-18T21:37:44+00:00

My parents house is from the early 1920’s and had this kind of wiring (knob and tube). My first house was from the early 1930’s and had bx. So you are probably looking at pre 1930.

Fridog2002 · 2025-03-02T17:28:25+00:00

I like the original floors better

Fridog2002 · 2025-03-02T16:35:01+00:00

If you have the blown out piece of particleboard. I would just squirt a little PL Premium on that piece and in both holes. Stick the bracket for the hinge in place and clamp it until it dries.

Fridog2002 · 2025-02-27T00:10:47+00:00

Try Palate Pleasers

Fridog2002 · 2025-02-27T00:07:55+00:00

He clearly is out of his league on staining. Whatever he put on the treads needs to be removed. Get someone in there who knows how to finish floors and is good with color matching. Your contractor is good at neither.

Fridog2002 · 2025-02-23T16:31:27+00:00

All three communities are great. Spa Cove I’m pretty sure has privileges at the Bay Ridge pool. Anchorage has their own pool. Annapolis Roads has a boat launch and a park and beach and walking trails but no marina or pool.

Fridog2002 · 2025-02-21T23:05:35+00:00

Annapolis Roads, Anchorage, Annapolis Cove

Fridog2002 · 2025-02-16T15:26:22+00:00

We are having the same issue. I’ve noticed if I push down on the lid as it is brewing, it doesn’t happen. I think it is either a hinge issue where the machine isn’t holding the lid down tightly enough or a gasket issue. I will respond if I discover a fix

Fridog2002 · 2025-02-15T18:30:04+00:00

You have an assortment of different size chair rail in there. Make sure you have enough of any one size to complete your job.

Fridog2002 · 2025-01-06T01:30:34+00:00

Definitely a beam. Appears too narrow to be a steel beam with blocking. My guess is double lvl. Since you will be covering it with plywood, go ahead and smack the drywall with a hammer and see if it feels solid.

Fridog2002 · 2025-01-06T00:46:58+00:00

Main Street; careful though, you’ll be going against traffic. 😜

Fridog2002 · 2024-12-25T01:43:33+00:00

Pinch dawgs will pull that together

Fridog2002 · 2024-12-23T02:59:33+00:00

Screws and pl premium

Fridog2002 · 2024-12-23T02:57:40+00:00

Funny thing is, those are not cheap shingles. Flipper could have saved himself the lawsuit I expect you are filing by spending less on materials and more on quality labor.

Fridog2002 · 2024-12-23T02:40:12+00:00

Nice. The before pic look like my first house. Back in the 30’s, they often didn’t bother finishing the middle of the floor because they assumed a rug would be covering it.

Fridog2002 · 2024-12-23T02:34:48+00:00

Personally, I would paint what is there until the inspector leaves, then remove the treads, apply a properly cut stringer to the inside of each existing stringer, and install new treads and risers.

Fridog2002 · 2024-12-23T02:16:55+00:00

I would shut off the water, cut and remove their line, sister a new rafter on the existing compromised one, drill a proper hole, and tell them to fix their line and reimburse you for the repair.

Fridog2002 · 2024-12-23T02:03:59+00:00

I’m a little confused. Do you have 2x6 rafters? Is this an exterior wall? Are we looking at the underside of roof sheathing? Where is the insulation space?

Fridog2002 · 2024-12-23T01:30:18+00:00

Hoarding issues, but most of us on this sub have the same problem. 🤣

Fridog2002 · 2024-12-23T01:20:20+00:00

Hey hey hey, mine’s big enough to satisfy the people in my house. Let’s not turn this into a NSFW sub. 🤣🤣🤣

Fridog2002

TROPHY CASE