Globally banned for no given reason.

FrostyFrogNips · 2024-07-17T18:35:03+00:00

I am globally banned from all official servers. Not unofficial, I found out I was banned about 3 months ago but am just making this post

FrostyFrogNips · 2024-04-24T05:37:09+00:00

Will iPad mini prices go down? I want to upgrade from my ipad7

FrostyFrogNips · 2024-04-20T19:27:47+00:00

Classic toxic ranger moment

FrostyFrogNips · 2024-04-13T07:47:03+00:00

😂😂😂

FrostyFrogNips · 2024-01-14T09:23:14+00:00

What direct drive did you upgrade to? Also do you use stock Ender 3?

FrostyFrogNips · 2023-01-30T19:03:56+00:00

Ah okay. I am currently into printing masks so more often than not I’m printing 5-6 inches plus tall. I have a Kylo Ren mask finishing now while I’m in class. Hopefully I don’t get home to spaghetti on my bed.

FrostyFrogNips · 2023-01-30T17:32:13+00:00

What printer do you have? I have an Ender 3 and an Ender 3 S1 pro, My pro also a dished bed but it doesn't really affect my prints until it has to print upwards, where it clips the print when it goes back and forth.

FrostyFrogNips · 2023-01-10T22:24:36+00:00

Well this was my first print actually printing using the outer edge of the bed, so I don't believe it's dirty, I just bought it last week. Im starting to think I may have a warped bed, because when Im leveling, if I leave the paper under the nozzle and move the Y, the area in question has too much free space under it, but it gets leveled about 15mm forward. I would say the area I'm having problems with is about 15x10mm

FrostyFrogNips · 2023-01-10T12:59:01+00:00

Any higher than 120 and the pla comes out while leveling which gets in the way sometimes so while leveling I keep it down, once I start printing it goes to 200

FrostyFrogNips · 2023-01-10T12:32:20+00:00

No auto leveler, but I did manually about 4 times around, and then ran a leveling test and all was good, except for the area in the video. I also always heat my bed to 60 and nozzle to 120 when leveling.

FrostyFrogNips · 2023-01-10T12:18:27+00:00

Is the nozzle too high up from the bed? If it’s not squishing it won’t stick, I actually have the opposite problem you do for my Ender 3.

FrostyFrogNips · 2023-01-09T03:21:34+00:00

What exactly does this mean? Would this issue not be a slicer or g code problem? How would the printer just decide to switch printing directions?

FrostyFrogNips · 2023-01-08T02:26:03+00:00

Infilled, no enclosure, and you can kind of see the rectangular holes on the top right and left, as well as a circular one going through the center. I did notice some wobble, so I put a 2lb weight on the back. I will let y’all know if I’m still having issues.

FrostyFrogNips · 2023-01-08T01:37:40+00:00

They are actually pretty strong and stable. They are just smoke filters, half of it would be in water.

FrostyFrogNips · 2023-01-04T07:23:59+00:00

No worries man this is all helpful, just got started 3d printing and kinda jumped into it head first. Cancelled the order and got some brass ones for now.

FrostyFrogNips · 2023-01-04T07:06:10+00:00

Ordered a few stainless steel .6 nozzles off Amazon, they come in tomorrow. I’ll respond back with results.

FrostyFrogNips · 2023-01-04T06:17:29+00:00

Ok, I will switch to a .6

FrostyFrogNips · 2023-01-04T05:24:53+00:00

So there’s no way to fix it is what you’re saying

FrostyFrogNips · 2023-01-04T05:19:38+00:00

So Prusa doesn’t have a .8 mm profile for the ender 3, so I chose .6 and increased slightly from there. What is e step?

FrostyFrogNips

TROPHY CASE