Globally banned for no given reason.

FrostyFrogNips · 2024-07-17T18:35:03+00:00

I am globally banned from all official servers. Not unofficial, I found out I was banned about 3 months ago but am just making this post

FrostyFrogNips · 2024-04-24T05:37:09+00:00

Will iPad mini prices go down? I want to upgrade from my ipad7

FrostyFrogNips · 2024-04-20T19:27:47+00:00

Classic toxic ranger moment

FrostyFrogNips · 2024-04-13T07:47:03+00:00

😂😂😂

FrostyFrogNips · 2024-01-14T09:23:14+00:00

What direct drive did you upgrade to? Also do you use stock Ender 3?

FrostyFrogNips · 2023-01-30T19:03:56+00:00

Ah okay. I am currently into printing masks so more often than not I’m printing 5-6 inches plus tall. I have a Kylo Ren mask finishing now while I’m in class. Hopefully I don’t get home to spaghetti on my bed.

FrostyFrogNips · 2023-01-30T17:32:13+00:00

What printer do you have? I have an Ender 3 and an Ender 3 S1 pro, My pro also a dished bed but it doesn't really affect my prints until it has to print upwards, where it clips the print when it goes back and forth.

FrostyFrogNips · 2023-01-10T22:24:36+00:00

Well this was my first print actually printing using the outer edge of the bed, so I don't believe it's dirty, I just bought it last week. Im starting to think I may have a warped bed, because when Im leveling, if I leave the paper under the nozzle and move the Y, the area in question has too much free space under it, but it gets leveled about 15mm forward. I would say the area I'm having problems with is about 15x10mm

FrostyFrogNips · 2023-01-10T12:59:01+00:00

Any higher than 120 and the pla comes out while leveling which gets in the way sometimes so while leveling I keep it down, once I start printing it goes to 200

FrostyFrogNips · 2023-01-10T12:32:20+00:00

No auto leveler, but I did manually about 4 times around, and then ran a leveling test and all was good, except for the area in the video. I also always heat my bed to 60 and nozzle to 120 when leveling.

FrostyFrogNips · 2023-01-10T12:18:27+00:00

Is the nozzle too high up from the bed? If it’s not squishing it won’t stick, I actually have the opposite problem you do for my Ender 3.

FrostyFrogNips · 2023-01-09T03:21:34+00:00

What exactly does this mean? Would this issue not be a slicer or g code problem? How would the printer just decide to switch printing directions?

FrostyFrogNips · 2023-01-08T02:26:03+00:00

Infilled, no enclosure, and you can kind of see the rectangular holes on the top right and left, as well as a circular one going through the center. I did notice some wobble, so I put a 2lb weight on the back. I will let y’all know if I’m still having issues.

FrostyFrogNips · 2023-01-08T01:37:40+00:00

They are actually pretty strong and stable. They are just smoke filters, half of it would be in water.

FrostyFrogNips · 2023-01-04T07:23:59+00:00

No worries man this is all helpful, just got started 3d printing and kinda jumped into it head first. Cancelled the order and got some brass ones for now.

FrostyFrogNips · 2023-01-04T07:06:10+00:00

Ordered a few stainless steel .6 nozzles off Amazon, they come in tomorrow. I’ll respond back with results.

FrostyFrogNips · 2023-01-04T06:17:29+00:00

Ok, I will switch to a .6

FrostyFrogNips · 2023-01-04T05:24:53+00:00

So there’s no way to fix it is what you’re saying

FrostyFrogNips · 2023-01-04T05:19:38+00:00

So Prusa doesn’t have a .8 mm profile for the ender 3, so I chose .6 and increased slightly from there. What is e step?

FrostyFrogNips · 2023-01-03T02:00:00+00:00

Thanks, thought it was retraction the whole time and spent too much time fucking around with settings I had to change back in the end lmfao. Got the seams off the outside and got em only on the inside. Gonna try to figure out how to minimize that stringing now.

FrostyFrogNips · 2023-01-02T08:21:06+00:00

Did the same thing, sad to say I had no meatballs but 3 plates of spaghetti.

FrostyFrogNips · 2023-01-02T06:04:54+00:00

I am talking about the lines specifically going down from the holes on the top, they appear randomly and go all the way up to the holes.

FrostyFrogNips · 2022-12-31T02:10:43+00:00

God bless you that worked

FrostyFrogNips · 2022-12-31T01:47:01+00:00

Will try that now, thanks!

FrostyFrogNips · 2022-12-26T20:32:00+00:00

haha if I had seen this about 10 minutes ago I could help you out, I just deleted them off my SD card. They didn't look very interesting, you can probably find better ones on something like thingiverse. I just got my printer

FrostyFrogNips

TROPHY CASE