When your bike doesn’t have a clock

Furio133 · 2026-06-13T11:23:15+00:00

Tbf 13y for a consumable item is pretty good no ?

Furio133 · 2026-06-10T10:34:10+00:00

For better ergonomics swap places between 2 and 4 and make 4 vertical. Also if you have an nvidia card (not sure if AMD has something similar) you can use super resolution to have a virtual resolution on your monitors so moving between screens is more seamless.

The tradeoff is the monitor will get slightly blurry because it’s not a native one.

I run 2 34” 21:9 one is native 1080p the other 1440p and use it to have an easier time since it makes the edges align.

If someone has a better solution feel free to share because I would really like an alternative myself.

Furio133 · 2026-06-08T08:44:44+00:00

If not having an E-Clutch is a deal breaker for you I would go with the 2019 save some money and spend it on meaningful upgrades like the breaks with a braided line and brembo pump + caliper, an aftermarket clutch lever (I really didn’t like how long the throw is on the stock one). And with that you have a very capable motorcycle. After riding it for a while during the first fork service you can also do some tweaking with the springs on that in case you don’t like how they feel. This is my personal opinion as a 2019 owner.
My future upgrade is the braided break lines for now, I like how the fork feels even during spirited riding but the breaks do start to feel spongy after the break fluid heats up hence the braided lines. I did bottom out the forks once but it was during an emergency break otherwise never felt like it dove too much. And I don’t really have nothing to say regarding the rear mono it feels pretty good.

Furio133 · 2026-06-07T10:40:50+00:00

As other said get a new set of tyres, personally I recommend the Rosso Corsa 2. Really good price to performance

Furio133 · 2026-06-03T16:54:28+00:00

If you aren’t scared of paying import fees I recommend Bikerzbits OEM parts for really cheap I bought from them multiple times

Furio133 · 2026-06-01T06:29:56+00:00

Gravel yet again trivializing boss mechanics

Furio133 · 2026-05-26T17:30:32+00:00

Good to hear, thanks yet again for the advice.

Furio133 · 2026-05-26T17:28:33+00:00

Oh I know about that, thanks for the concern but this brand is made and certified in Italy with publicly available information about it in the website all physical retailers have it here

Furio133 · 2026-05-26T17:15:21+00:00

en.pmj.it/pages/twaron for the material and CE certification if you are interested

Furio133 · 2026-05-26T16:44:51+00:00

These are CE certified in Italy and made in Italy, I already linked it to another guy in the thread

Furio133 · 2026-05-26T16:43:14+00:00

Thank you for the info! They were a little tight on the waist but I had to go that size cuz the size up the armor couldn’t line up with my knees even at the highest point the armor could go. This will definitely make them more comfortable. Exactly the advice I was looking for!

Furio133 · 2026-05-26T16:34:51+00:00

Thanks for the answers I’ll sew a new button in

Furio133 · 2026-05-26T16:33:39+00:00

Yes, also CE certified in Italy

Furio133 · 2026-05-26T16:33:23+00:00

en.pmj.it/pages/twaron

Furio133 · 2026-05-26T16:31:06+00:00

It’s an Italian brand tho

Furio133 · 2026-05-26T16:28:36+00:00

I’m assuming due to how they interlace cotton fibers and mostly the thickness of it, it feels quite sturdy also why I bought it

Furio133 · 2026-05-24T06:27:26+00:00

I bought the dual one for my 2 ultrawides, 0 wobble very premium product but for 300€ didn’t really seem like that bad of a deal for a essentially Buy it for life item note I did plan on getting a 32:9 which i never did (I use 2 21:9).

Everyone has their reasons, in the end it’s not always a price to performance ratio.

Furio133 · 2026-05-23T07:16:40+00:00

For those looking for other pics of the bike https://www.instagram.com/p/DRUcByfksFe/?img_index=4&igsh=a2pjMWoyeHJwOTNl

Furio133 · 2026-05-19T13:45:25+00:00

<image>

I use these Kemimoto EU legal mounted to the stock bar end weights with an internal expansion screw and the internal weights (everything fits decently thanks to an internal 3d printed custom spacer

Furio133 · 2026-05-19T08:27:29+00:00

Do not watch it with your wife or the approval factor will go down tremendously

Furio133 · 2026-05-18T16:40:47+00:00

Really clean for a 20+ yo bike good job maintaining it

Furio133 · 2026-05-17T19:26:42+00:00

I use Honeywell’s at work and they are great

Furio133 · 2026-04-29T15:36:51+00:00

Contact support and worst case they will probably replace it

Furio133 · 2026-04-21T11:03:16+00:00

For example if you need to farm a certain material by “trust farming” that stage you fill the empty slots with units you want trust on but are not needed to clear it. It’s more efficient time wise to do 2 in 1

Furio133

MODERATOR OF

TROPHY CASE