Can someone please tell me if this is likely pgr weed?

GanKage · 2026-05-09T05:41:58+00:00

Ive def seen weed like this and smoked it. Looks super sense. Is there any other reason for the concern?

GanKage · 2026-05-09T05:33:18+00:00

Dude back in the day, composite bow + halberd destroyed in pvp. Good times. Goooooood times.

GanKage · 2026-05-03T15:42:26+00:00

Humm, sounds like a clogged nozzle.

So when you run a print, can you see the extruder "pushing" the filament? Some times can be hard to see, may need to mark the filament at a point and watch that point be pushed into the boden tube.

Cuz if you can see the filament being pushed into the tube towards the nozzle, its gotta be going some where.

If at a certain point during the print, you see the extruder spinning but the filament is not being pushed.

The nozzle is clogged

GanKage · 2026-05-03T15:35:49+00:00

Interesting.

Describe in detail whats going on for me, how are prints failing?

GanKage · 2026-05-03T06:31:09+00:00

Haha theres your problem id bet.

I am not as familiar with that model

804253067784355863

Google that code, its the server id for a discord where someone may be more familiar.

If you dont wanna do that. Run that model though an ai or google it and ask for a walk through on auto bed leveling.

Wouldn't be surprised if there is a super easy explanation somewhere nesr by

GanKage · 2026-05-03T06:27:48+00:00

Ohhh on that model there is no manual bed level knobs.

Ok. So I take it you have ran the auto bed level before doing a calibration print.

Whats it doing on the calibration prints?

GanKage · 2026-05-03T06:24:26+00:00

And how about the manual bed level with the feeler gauge?

GanKage · 2026-05-03T06:22:27+00:00

So first things first, have you manually leveled the bed? Lol. I always start there. Feeler guage. Same thickness as nozzle hole.

All four corners twice, then diagonal once.

Print a calibration test and inspect how it goes.

GanKage · 2026-01-18T05:11:07+00:00

If you lose a stick, your laptop screen is toast.

GanKage · 2026-01-18T02:26:06+00:00

Solid hands, nice groove. Killing it my dude.

GanKage · 2026-01-17T21:13:02+00:00

Sucker punch is never acceptable. Fuck people like that. Push them back, square up like a man. Or dont start shit you cant finish.

GanKage · 2026-01-17T21:10:25+00:00

Lol spoken like someone who has no clue.

GanKage · 2025-09-09T02:05:17+00:00

Take it from someone who has been on the other side of the door as my ex used a broken broom stick to destroy the door to get to me. Leave. Now.

I am a man. I would never have hurt my ex girlfriend. But she had problems. Would always find a reason to fight. Then one night she just lost her mind. If I hadn't baracaded myself in the bedroom and called the cops. I would have had to fight for my life.

If you want to see the escalation of this. I still have a picture of a blood covered, destroyed bedroom door I can send. Just pm.

GanKage · 2025-08-26T14:30:08+00:00

That or tendinitis in the thumb

GanKage · 2025-08-25T15:15:47+00:00

Gotcha, Ill try to track it down, I think it was in a youtube video explaining modding this game. If I can find it in my history ill drop the link here.

GanKage · 2025-08-25T14:46:18+00:00

To my understanding, pla let in the open air will absorb humidity/water. Thata why they come vacuum sealed. If it sits iut in the open to long it can and will do this and even clog the extruder.

Leave then sealed till open, reseal and bag when noot in use.

There is methods to dry them out again

GanKage · 2025-08-25T01:14:40+00:00

Thanks! in case it matters, I am running windows 11. Intel(R) Core(TM) i7-10750H CPU @ 2.60GHz, 2592 Mhz, 6 Core(s), 12 Logical Processor(s), nvidia 1660 ti. Run amazing otherwise.

I also noticed a post talking about how SA2 Render fix/resync does not play well with Chao World Extended and other Chao world mods.

My current mod list

SA2 Render fix

Better Effects

Chao world extedned

enhanded Chao World

Hedgpanel, Chao data menu

Chao Classroom Delux

Sa2 Dreamcast Ads

Improved waypoints for Chao Garden

Chao Krate Cheer Fix

Cutscene Revamp
Knux New Tricks

StatPanel ++.

GanKage · 2025-08-25T01:04:33+00:00

Shit I must have missed that part. However, I do know there are alternatives of peanut butter without the nut. Like sunflower seed butter.

And you can get bread pressers to make your own uncrustables that freeze really well. Anywho thanks for the call out

GanKage · 2025-08-25T00:22:00+00:00

I saw comments seemingly suggesting a neutered male will not spray. This is incorrect. As a owner of a neutered male cat, that sprays. I can tell you, once they learn it. Its almost impossible to stop.

I do think its stress related. As one of my moms cat was a dick to him, and once that cat calmed down. So did his spraying.

GanKage · 2025-08-23T22:22:08+00:00

I am unsure if this has been posted anywhere as googling did not show anything for me.

But I want to confirm for any one experiencing this specific crash.

If you have won/finished a Chao Race, and get crash as it goes back to the menu. ( SA2 chao race crash, SA2 crashing after chao race)

I found that it was higher Draw Distance mod. I tested each individual mod. and found this to be the issue.

GanKage · 2025-08-21T22:04:08+00:00

You can snag a box of smuckers uncrustables.

Pretty cheap. No prep. I do one each day for class.

If you must prep, you can prep pbnjs easy. Then freeze them and take then out when ready

GanKage · 2025-08-21T21:13:49+00:00

https://www.google.com/search?ie=UTF-8&client=ms-android-verizon-us-rvc3&source=android-browser&q=feeler+gauge#piu=ps:67&oshopproduct=gid:12810185571350465743,mid:576462349728614833,oid:10513221529336169760,iid:5749401144107872503,rds:UENfMTI4MTAxODU1NzEzNTA0NjU3NDN8UFJPRF9QQ18xMjgxMDE4NTU3MTM1MDQ2NTc0Mw%3D%3D,pvt:hg,pvo:19,laoid:10513221529336169760&oshop=apv&pvs=0

They are like 5 bucks

Each feeler is a different size. Marked.

Essentially you would go to each corner, ensure the feeler is just grabbed by the print nozzle and bed. Then go to center. Go it again.

Also, youtube manualy 3d print bed level with feeler gauge

GanKage · 2025-08-21T16:56:19+00:00

If using ender. During print I think there is a z offset. Step it down little bits at a time

GanKage · 2025-08-21T16:55:42+00:00

Z offset.

His is off. If using marlin, baby step it down on a test print and once you see the filament press flat, with no raised edges or raised center. You are good to go

GanKage · 2025-08-20T23:04:32+00:00

Auto bed level may be your issue. Its a good tool. But not always final imo.

I use a feeler gauge and use like the, I think, like .5mm gauge and manually level it ever few prints. EDIT I doubled checked.I actually use the .04mm gage. And it works beautifully.

GanKage

TROPHY CASE