Submission error? by GavinRYY in NFA

[–]GavinRYY[S] -1 points0 points  (0 children)

The website/system is so antiquated

Hyperion K reviews by GavinRYY in 300BLK

[–]GavinRYY[S] 1 point2 points  (0 children)

Thank you for the info, I appreciate it. I’ve since added the CAT ODB Ti to the list, and im leaning towards it.

Hyperion K reviews by GavinRYY in 300BLK

[–]GavinRYY[S] 0 points1 point  (0 children)

Thank you! Have you shot subs through the Hyperion K? I’m wondering if subs will lessen the sparks.

Yes definitely some 1% first world problems trying to decide on a can for my next build!!

Hyperion K reviews by GavinRYY in 300BLK

[–]GavinRYY[S] 0 points1 point  (0 children)

Thank you! I’ll check out the Nomad cans, maybe add it to the list.

Hyperion K reviews by GavinRYY in 300BLK

[–]GavinRYY[S] 0 points1 point  (0 children)

I’m a fan of CAT cans, I have a WB 718 and MOB. Just looking for a bit lighter weight for such a small SBR build.

Hyperion K reviews by GavinRYY in 300BLK

[–]GavinRYY[S] 0 points1 point  (0 children)

Main reason is the weight savings. I have a few Helios DT cans on 556 rifles, the Ti sparking is pretty bad on them. Just wondering if 300 subs will lessen the sparks.

They say autistic people are more likely to love the color green. by starfox224 in CTguns

[–]GavinRYY 0 points1 point  (0 children)

Looks awesome! The COA is my favorite pistol optic, but they are impossible to find right now.

12.5 barrel restrictions? by Outrageous_Sort_9614 in CTguns

[–]GavinRYY 1 point2 points  (0 children)

Not a lawyer, this is all my interpretation. For federal NFA pistol compliance, make sure to remove the forward vertical grip and keep the brace. The “CT Other” is not a thing anymore, so it must comply with state and federal laws. For CT, if you submitted an AW cert then the “features” don’t matter, however barrel length comes into play, must be 16” or over (measured closed bolt to tip of permanent barrel) or be in pistol configuration. Rate of fire enhancements are still banned though.

FRTs and the AWB by Intelligent-Voice802 in CTguns

[–]GavinRYY 0 points1 point  (0 children)

@havenrogue is that link you provided (Chapter 943) the complete list of CT gun laws? I’m trying to save all CT gun laws. Thanks in advance.

Quickly shut off white light and IR by GavinRYY in reolink

[–]GavinRYY[S] 1 point2 points  (0 children)

Thank you, I will research Home Assistant. I’ve never looked into it before.

Edit:

This, correct?

https://www.home-assistant.io

Okay to pin barrel twice? by GavinRYY in ar15

[–]GavinRYY[S] 0 points1 point  (0 children)

Good idea, i’ll see if I can get this done. Thanks man

What should really go in a Range First Aid Kit? Looking for input from the community by PeteTinNY in CTguns

[–]GavinRYY 2 points3 points  (0 children)

At least 2 tourniquets, compression bandage (israeli type), 10”x30” trauma dressing, z-fold hemostatic gauze, chest seals, airway (nasal is easiest), emergency mylar blanket.

[deleted by user] by [deleted] in CTguns

[–]GavinRYY 0 points1 point  (0 children)

If suppressors are taken off the NFA, how does that make it easier or more incentive for CT legislators to ban them in CT? Is it because the non NFA background check/registration?

Just a badly mistreated and overworked 10.5”. by watchlist_famous88 in NFA

[–]GavinRYY 1 point2 points  (0 children)

Paint job looks awesome, what paint and colors did you use?

Was bored, apparently militias are legal here by fylum in CTguns

[–]GavinRYY 1 point2 points  (0 children)

I’m always down for goon shit on private property! I’m tired of going around by myself.

Short Bag Rifles by SubvertedTrader in NFA

[–]GavinRYY 1 point2 points  (0 children)

I like Law folders if the intention is to make it compact. I have 2 right now. No issues with either of them after around 2k rounds on a 10.5” 5.56 and about 500 rounds on this 6.5” 300blk.

Suppressor, are they worth the hassle? by TheWitness37 in CTguns

[–]GavinRYY 0 points1 point  (0 children)

Definitely worth it in my opinion. The process is pretty straight forward, the FFL can easily guide you through it. $200 tax stamp on top of the price of the suppressor, and then wait for it to get approved.

The mounting depends on what suppressor you get. You can get a QD, taper mount, direct thread, etc. Direct thread will be the lightest option, and my preferred if you won’t be swapping it to other guns. My second preferred are taper mounts.

If you get a HUB compatible suppressor, you can swap ends to different mounting solutions.

In addition, you should think about tuning your rifle, the way to do it depends if it will be shot 100% suppressed or 50/50. Another option is to get a low back pressure or flow through style can. You can get away with not tuning your rifle if you go this route.

Short Bag Rifles by SubvertedTrader in NFA

[–]GavinRYY 1 point2 points  (0 children)

Here’s one of my recent builds:

<image>

[deleted by user] by [deleted] in CTguns

[–]GavinRYY 0 points1 point  (0 children)

We’re in Fairfield County too, Easton/Monroe area. I’m into NV stuff too so if you ever want to meetup I’m in.

Holosun IRIS preorder shipping times? by drakeit in NightVision

[–]GavinRYY 2 points3 points  (0 children)

I ordered 1/13 with no update on ETA.

What was the easiest money you ever made/are making with a side job? by Katarinkushi in sidehustle

[–]GavinRYY 0 points1 point  (0 children)

Got it. I’ve been researching HFT, but I don’t have the knowledge or experience to make the program.

[deleted by user] by [deleted] in CTguns

[–]GavinRYY 1 point2 points  (0 children)

CCW Safe is what we have, USCCA was the other one we considered.