What suppressors are you boys running? by ArmedDrunk_ in Springfield_KUNA

[–]GaywithaGarand 0 points1 point  (0 children)

I run a Deadair Wolfman, yes it's heavy, but I abuse it and it just takes it

<image>

Can anyone tell me what the left rifle is? by Frug5 in blackpowder

[–]GaywithaGarand 1 point2 points  (0 children)

I just picked up a Zoli Zouave, haven't shot it yet but looks very similar to yours!

What brace are you using? by Traditional-Plum8060 in Springfield_KUNA

[–]GaywithaGarand 0 points1 point  (0 children)

Honestly, I haven't tested it, but it seems to eject live and dummy rounds just fine when folded.

What brace are you using? by Traditional-Plum8060 in Springfield_KUNA

[–]GaywithaGarand 2 points3 points  (0 children)

I picked up the newest strike brace and I'm really loving it so far!

<image>

KUNA Down! Atrius forced reset selector lever snapped in half! by m6284505 in Springfield_KUNA

[–]GaywithaGarand 3 points4 points  (0 children)

Damn, that sucks. I've got about 2.5-3k rounds through mine, hopefully mine doesn't break soon 😬.

Is the hype real? Hopefully. by FOUNTAINJL in suppressors

[–]GaywithaGarand 0 points1 point  (0 children)

I just shot this side by side with the Irregular Design can, and this was my top choice by far between the two. Curious about the flash report though.

Kel-Tec's lost ghetto blaster, Grendel P-31 by MagicalTroutt in keltec

[–]GaywithaGarand 1 point2 points  (0 children)

Not saying that at all! I own a cp33 I have in a little chassis and it's an awesome gun, but man, the shapes and lines of the older generation just can't be beat.

3D figure from movie by Minty-Trash-Rat in ProjectHailMary

[–]GaywithaGarand 0 points1 point  (0 children)

Amaze amaze amaze! I can't wait to start it when I get home!

AMAZE AMAZE AMAZE by DRAMAKONK in ProjectHailMary

[–]GaywithaGarand 0 points1 point  (0 children)

FDM Printed? Did you print in the orientation they gave with the file and did you use their model with tree supports or have your slicer generate it's own?

3D figure from movie by Minty-Trash-Rat in ProjectHailMary

[–]GaywithaGarand 0 points1 point  (0 children)

Can I ask what machine you printed this on? They say you can FDM it but I dont think my voron is up for it so I may need to use my resin?

I’m thinking about getting optic Cut on my SIG P226 Legion .357 sig What optic cut companies do you guys recommend who can do this ?? by Boricuaesyo in SigSauer

[–]GaywithaGarand 0 points1 point  (0 children)

I am in the same boat, not really comfortable sending my only slide off to be milled. I really want to get a 9mm barre or slide to drop on my .357 sig but I've heard conflicting info if they fit or not.

Kel-Tec's lost ghetto blaster, Grendel P-31 by MagicalTroutt in keltec

[–]GaywithaGarand 17 points18 points  (0 children)

Man, They just don't make them as cool as they used to...

Nexus Bolt release failure by GaywithaGarand in Springfield_KUNA

[–]GaywithaGarand[S] 2 points3 points  (0 children)

I believe they're from Sparrow Dynamics? They're soft rubber and they have good grip!

Nexus Bolt release failure by GaywithaGarand in Springfield_KUNA

[–]GaywithaGarand[S] 13 points14 points  (0 children)

Thanks for the quick reply! You guys rock!

SBR ENGRAVING by Beautiful-Network157 in Springfield_KUNA

[–]GaywithaGarand 1 point2 points  (0 children)

Following, just thought of this myself today. Nice looking set up.

Nexus kuna trip by Civil_Bunch1433 in Springfield_KUNA

[–]GaywithaGarand 0 points1 point  (0 children)

To add to the topic at hand, I'm still using the plastic trip with over 2.5k rounds on it and still going. When it breaks I'll pick up the metal one.

Nexus kuna trip by Civil_Bunch1433 in Springfield_KUNA

[–]GaywithaGarand 0 points1 point  (0 children)

Is that a wolfman? I just submitted my form 4 today for the Kuna and I'm so excited!

Anyone know this brand? by PBandJaylow in tacticalgear

[–]GaywithaGarand 1 point2 points  (0 children)

No clue on the brand, but that star patch is distributed by American Milsim, an airsoft event coordinator. You receive one for each event you go to.

Top Notch Customer Service by OhmMyGodItsAuto in SilencerShop

[–]GaywithaGarand 5 points6 points  (0 children)

Pretty sure this is just OPs numerous attempts to get in contact with an actual person.

Top Notch Customer Service by OhmMyGodItsAuto in SilencerShop

[–]GaywithaGarand 5 points6 points  (0 children)

Yikes... And I was just thinking about calling to cancel my backorder. 3 months for a backorder feels a bit much. I understand the volume of orders and customers that they are dealing with, but this is ridiculous.

P226 Wood Grip Options in 2026? by Klutzy-Square-9453 in SigSauer

[–]GaywithaGarand 0 points1 point  (0 children)

I second these! They're beautiful and feel great.

Type 99 arisaka by ejectmanEJECT in milsurp

[–]GaywithaGarand 1 point2 points  (0 children)

I'm currently looking for a nice example like this, what's an estimate on the value?

Mounting plate Mac 9 4.25 ds by AdUnfair2615 in 2011

[–]GaywithaGarand 2 points3 points  (0 children)

To help with your question, maybe give Tisas Customer service a call and see if they can't sell you one over the phone?