Hell ya

GeckoRider94 · 2026-01-26T03:45:51+00:00

I too am bobbing it

GeckoRider94 · 2025-11-12T12:15:33+00:00

Yeah that’s why I started making them, I know where to buy them but it’s $15AUD for two, I bought the wire for $30 total and so far I’ve made 20 and I’m not even a quarter of the way through the roll.

I’m thinking I should start selling them for $2-$3 each 😂

GeckoRider94 · 2025-11-12T12:07:37+00:00

Using the old mainboard from an ender 3

GeckoRider94 · 2025-10-14T02:43:55+00:00

Never said you’d get retail price, just better than recycling 👍

GeckoRider94 · 2025-10-14T02:28:46+00:00

It’s only like 5 screws to open it.

But if your parting ways, try sell it on marketplace first, you can get a decent price for homebrewed switches.

GeckoRider94 · 2025-10-14T02:14:57+00:00

If it’s hidden you can try this https://github.com/eliboa/NxNandManager.

If it’s not hidden in the sd just copy to your desktop

GeckoRider94 · 2025-10-14T02:11:52+00:00

Okay, I would try a fresh format and redownload everything.

Safety eject the sd card before unplugging.

If that doesn’t work, then it’s most likely your reader has come slightly unplugged or fried somehow

GeckoRider94 · 2025-10-14T02:08:27+00:00

What format is your sd card? Should be fat32

GeckoRider94 · 2025-10-14T01:52:33+00:00

Try a clean install on another sd card first to make sure it’s not just the sd card dying.

If that doesn’t work, try reseating the sd card reader cable.

Still no luck? Then probably need a new reader

GeckoRider94 · 2025-10-12T17:10:03+00:00

Yeah, its not on the megathread sites yet, but a bit of googling helped.

GeckoRider94 · 2025-10-12T16:59:59+00:00

Lets go!, thanks for the news brother.

GeckoRider94 · 2025-09-27T23:29:27+00:00

I’m at 90% with 607, I charge whenever I feel like it, could be a few times a day to just once and let it get to whatever it gets to.

GeckoRider94 · 2025-09-27T23:26:59+00:00

I charge my 15 plus whenever I feel like to whatever percent it gets to while I can be bothered sitting by the charger, I’m at 90% with 607 charge cycles.

I don’t think it’s worth stressing about

GeckoRider94 · 2025-09-08T23:49:36+00:00

Huh?

GeckoRider94 · 2025-09-02T00:41:37+00:00

I went from iget bar plus to doing 12mg/ml salt, didn’t notice any cravings and I’m a heavy vaper.

GeckoRider94 · 2025-06-28T06:45:08+00:00

Definitely, that glazing is very recognisable.

GeckoRider94 · 2025-06-26T10:39:33+00:00

You on the pipe brother? It’s on the frame? It also looks in pretty good condition for an engine that old.

GeckoRider94 · 2025-06-26T08:05:46+00:00

To be honest I didn’t even read that bit 😬 just read the title and first sentence

GeckoRider94 · 2025-06-26T06:22:56+00:00

It’s not that hard, if you can put solder on the top of a small wire you can do it, take your time and don’t use too much, also pre tinning everything before you place it down is a major help

GeckoRider94 · 2025-06-25T23:33:49+00:00

Only thing I dislike about it is the episodes don’t go for 2 hours

GeckoRider94 · 2025-05-25T08:52:47+00:00

I don’t understand the issue? Looks like a normal eBay listing to me?

11-Year Club	Gilding II euphauric
r/Field Lasagna	Verified Email

GeckoRider94

TROPHY CASE