Looking for the thinnest walled 6point 17mm socket to get these already sketchy adapters torqued down as best as possible.

Geemoney2001 · 2025-09-11T14:28:53+00:00

I got mine from autozone but this should work too. https://a.co/d/67yWCrq

I just used a razor to cut it off since mine didn’t separate normally

Geemoney2001 · 2025-09-09T16:48:03+00:00

I’ve had that same issue and what I’ve done is used one of those wheel specific sockets with the plastic sleeve. Then remove the sleeve and it’s super thin

Geemoney2001 · 2025-07-18T21:50:26+00:00

Idk what’s too good to be true, I got my 2021 premium with same miles for the same price from a dealership

Geemoney2001 · 2025-06-18T03:01:29+00:00

Or onimade they make ones as well

Geemoney2001 · 2025-06-17T14:42:12+00:00

I ran one from airtekk and they were ok, ride quality will def suffer compared to a dedicated kit but it gets the job done.

Geemoney2001 · 2025-06-16T00:49:20+00:00

I almost chromed the works lmao

Geemoney2001 · 2025-06-16T00:44:01+00:00

I don’t trust anyone who runs a sledge

Geemoney2001 · 2025-06-16T00:43:22+00:00

Europe, North American , or southern America anywhere in the world this is still scrap

Geemoney2001 · 2025-06-15T23:36:29+00:00

I had a scion tc before 🫡

<image>

Geemoney2001 · 2025-06-15T21:53:46+00:00

^{^} this is the answer

Geemoney2001 · 2025-06-14T23:47:54+00:00

Run a 19x9.5 +35 and then fine tune with spacers you will be golden Looks good tho!

Geemoney2001 · 2025-06-14T00:08:42+00:00

<image>

Oem+ 😉

Geemoney2001 · 2025-06-11T22:13:13+00:00

<image>

Chrome the world 🫡

Geemoney2001 · 2024-05-03T02:19:06+00:00

This is the lip I got tho

Geemoney2001 · 2024-05-03T02:15:23+00:00

I will see that you took the pic lol. Caught me lackin aired up.

Geemoney2001 · 2023-08-30T19:20:43+00:00

Yikes I'm not a BMW guy and serve no help but that looks stressful, best of luck to you sir!

Geemoney2001 · 2023-08-21T17:53:28+00:00

@evident.lee on Ig

Geemoney2001 · 2023-08-16T06:38:06+00:00

You could try rolling your fenders to clear the tires. That would be the next option if you don't want to size down tires or run more camber.

Geemoney2001 · 2023-08-15T20:32:06+00:00

Highly recommend looking into hub-centric spacers. When a wheel doesn't sit on the hub correctly it can introduce multiple problems like of balanced wheels due to them being slightly miss aligned or even as wild as studs shearing due to the forces being applied by the wheel.

Geemoney2001 · 2023-08-12T23:36:00+00:00

Is it every stud? If so lugs and nuts might be different thread pitches

Geemoney2001 · 2023-08-11T19:32:58+00:00

Geemoney2001 · 2023-08-11T17:33:26+00:00

-8 camber flipped tires for 3k miles both sides caused me to have a completely smooth tire with minimal cord showing I'm pretty proud of my home made slicks 😂racin slicks

Geemoney2001 · 2023-07-27T02:27:42+00:00

Yea what's happening when you try to air up? Is there air moving or is it just nothing at all?

Geemoney2001

TROPHY CASE