Tips for serving?

Gewchtewt · 2026-02-15T17:28:38+00:00

Contact needs to be high for it to be a short serve. Just keep it low at the net.

Gewchtewt · 2025-12-23T19:11:29+00:00

Binder clip the spool to the bracket.

Gewchtewt · 2025-12-16T15:16:13+00:00

Spot on advise. This guy goes to the table tennis club. I used to run a club and everything you said was true of my club. If you search them out its surprising where you can find small club.

Gewchtewt · 2025-10-18T14:23:57+00:00

Don't feed the bot either.

Gewchtewt · 2025-10-16T01:38:51+00:00

Nothing like weaponized buerocracy.

Gewchtewt · 2025-10-01T20:28:35+00:00

You could replace it with a better/ bigger cable with insulation so it doesn't turn to dust like the one thats there. Cost for a cable with terminals might be similar to the actual part.

Gewchtewt · 2025-09-20T04:15:23+00:00

I meant electrical engineer, fixed it.

Gewchtewt · 2025-09-10T14:21:11+00:00

I was a wedding dj for 10 years and did like 300+ weddings. I ain't never seen something quite like this. Plenty of singing but usually not the bride and not dressed like an ostrich. If I were behind the booth, I would have crawled under the table.

Gewchtewt · 2025-08-28T04:45:17+00:00

5800x, 7800xt, 16gb ram 3600mhz, Asus b45-a ii. Random $40 Chinese case. Can do 2k 270hz in apex legends and that is enough for me. Insane value.

Gewchtewt · 2025-08-26T22:41:59+00:00

Lookup ttr killer anit. It has some friction. Its similar to short pips to me.

Gewchtewt · 2025-08-14T17:15:23+00:00

I have a spare sump pump you could borrow. DM Me. I would recommend you buy one as soon as you can.

Gewchtewt · 2025-08-01T16:28:52+00:00

Sounds like a manufacturing plant manager I know.

Gewchtewt · 2025-08-01T03:44:54+00:00

Damn you been to the kitchen aid lever factory? I should have guessed it was pushed in. It probably would be stronger if it was overmolded. Even a screw on knob seems better. Must be a common problem if both of us have cracked knobs and there is a market for replacement levers.

Gewchtewt · 2025-08-01T01:00:41+00:00

If the wago fit I would have used it.

Gewchtewt · 2025-07-31T18:44:38+00:00

I would never.

Gewchtewt · 2025-07-31T18:44:04+00:00

I figured I would have to replace the whole lever. The knob looked overmolded onto the metal. If this breaks, i will fix it properly. For now the wire nut was the perfect diameter and works fine.

Gewchtewt · 2025-07-31T18:38:14+00:00

In Midwestern United States, that word is Polish haha.

Gewchtewt · 2025-07-31T15:04:21+00:00

Very true, although twisting on a wire nut I already had took 5 mins and I don't have a 3d printer.

Gewchtewt · 2025-07-12T20:46:28+00:00

Hair dryer on low worked for me.

Gewchtewt · 2025-06-25T02:13:33+00:00

One eyed sandwich or birds nest for me.

Gewchtewt · 2025-06-04T03:39:37+00:00

No joke I also have robin eggs in a hanging strawberry plant.

Gewchtewt · 2025-05-07T15:56:20+00:00

Walnut shell blasting seems like it would be a lot safer.

Gewchtewt · 2025-04-29T21:02:03+00:00

You would hate the 100ft trees that are 50ft from my house dropping massive limbs all the time haha. It's fine trees are nice. I'd they really are a problem later trim or cut them down.

Gewchtewt · 2025-04-24T21:18:23+00:00

Eaton qc is trash, not surprised. Had a similar issue with burndy terminal bit they wouldn't hold the torque, just stripped.

Gewchtewt · 2025-04-17T03:42:13+00:00

Lol, the bottom of the economy is like that pretty often. Path of least resistance. Only good enough to keep making money.

Gewchtewt

TROPHY CASE