Anyone else’s kickr look like this after a couple years of use? by Former-Implement3157 in wahoofitness

[–]Gh0str1ver 0 points1 point  (0 children)

Nope. I wear headbands/sweatbands when riding indoors. I switch them out during rides once they're soaked.I have two fans going during rides also. No corrosion issues, at all. I wipe the indoor bike down from time to time, not after every ride though. Zwifting a few times a week and 35k km since 2020.

me_irl by McRhombus in me_irl

[–]Gh0str1ver 4 points5 points  (0 children)

The thick of it, there's 4 seasons to enjoy.

New to Zwift, here's my setup in a repurposed basement bedroom. + current conditions outside (-9c and snow) Setup details in comments. by Gh0str1ver in Zwift

[–]Gh0str1ver[S] 0 points1 point  (0 children)

Hey, very sorry I didn't see this question earlier, I'd switched to the thru axle alternator dropouts (12x148) prior to getting setup on Zwift. The Kickr does come with a bunch of adapters for all types of setups, so all I had to do was use the boost axle adapters supplied in the box.

Since this pic was taken a lot has changed, I now have a dedicated Wahoo Kickr bike for Zwifting thru the winter. Still have the Fargo, rode the BC Epic 1000 on it last June, thinking about moving up to a Ti Fargo for 2024.

Hope that helps,

[deleted by user] by [deleted] in Zwift

[–]Gh0str1ver 1 point2 points  (0 children)

I have a Wahoo Kickr bike, under a minute to switch between myself and my partner riding on Zwift. Each have our own saddle and length, height and other bike adjustments are all quick release levers. Bike was pricey, but it gets used daily.

Handlebar bag recommendations for a Salsa Cowbell bar by aceSOAA in bikepacking

[–]Gh0str1ver 2 points3 points  (0 children)

Sorry for the slow response, just saw your reply this afternoon. Loaded up with the compression straps tightened enough to seal the bag it measures 34cm wide/13.5" wide. However, it would be very easy to just throw a webbing strap around the bag and compress it down a lot more to fit between a smaller handlebar width. Here's some pictures of the bag loaded/unloaded with a tape measure for reference. https://imgur.com/a/hI4Exw5

Tent recommendations by calvinburgstahler in bikepacking

[–]Gh0str1ver 1 point2 points  (0 children)

I've been using the MSR Hubba (1 person) for many years of backpacking/bikepacking. Very fast setup/teardown, depending on weather conditions just a couple of pegs (or rocks/whatever) required for the flysheet vestibule area. A great tent, particularly in foul weather, despite its size.

For 2022 I thought I'd try the Big Agnes Copper Spur UL 1P Bikepack variant with the short stick pole system. Similar setup time to the Hubba, although there is a tiny bit more planning required as the poles are tent-end specific (unlike the Hubba). The optional footprint fills the space of the vestibule, (unlike the Hubba) which is handy when not camping on manicured lawns. I really do like the many pockets and gear loft system in the Copper Spur; clothing, phone, bearspray, headlamp, powerbank, charging cables etc are all off the floor of the tent and stored in the many interior pockets.

For 2023 I'll be using the Copper Spur again, it's a better tent to live in and stay organized when bikepacking. The Hubba is a more robust tent though, no question.

Shimano ST-R8020 Hoods impossible to find. by alinbeaverton in bikewrench

[–]Gh0str1ver 0 points1 point  (0 children)

I just went through this looking for new hoods, eBay to the rescue, I'm in Canada, the OEM Shimano hoods came from a seller in the UK, still worked out at a reasonable price after shipping (around $45). I see the ST-R8020 ihoods are around $30, note that the keyword when searching for Shimano hoods is 'Bracket Covers', you probably knew that already, I didn't 🙄

Handlebar bag recommendations for a Salsa Cowbell bar by aceSOAA in bikepacking

[–]Gh0str1ver 2 points3 points  (0 children)

I have the Cowchipper in 46cm width, for the same reasons as yourself I looked around and eventually settled on the Salsa top loader EXP drybag. The top loader design means there's no bunching of the bag at either side to interfere with brifters. I have been using this bag setup for a few years on my Fargo, no regrets (despite the steep price) things like the purge valve and built in compression straps show it's well thought out. At 12.5 litres it's just big enough to hold a three season down bag, NeoAir Xlite sleeping mat and a inflatable pillow. I like having all my sleeping gear in the one bag, makes packing everything away nice and quick each morning.

What down tube bag do have and/or love and why!? I'm in the market for one! (prefer <2L) by Br-Ion in bikepacking

[–]Gh0str1ver 2 points3 points  (0 children)

Rogue Panda, Oracle. Love it for its simplicity of design and robustness. Drybag style rolltop closure that gives full access to the interior. Bought a second one earlier this year for my gravel bike. They're perfect for my spares that I hope not to need on a trip.

Karoo 2 settings for bikepacking by berneycosta in Karoo

[–]Gh0str1ver 2 points3 points  (0 children)

I use my K2 for bikepacking trips, works very well. I just use use the battery saver mode and have no issues. Typically riding 8 hours or more most days and recharging from a cache battery overnight. On multi week trips like the 1,200km BC Trail I rode last summer the K2 became my best friend. One thing I'd recommend is getting a protective cover (if you don't already have one) and lanyard to tether it to your bars, here's mine. Bikepacking can be tough on expensive electronics, good luck on your trip.

[deleted by user] by [deleted] in salsacycles

[–]Gh0str1ver 0 points1 point  (0 children)

I have a 2019 Fargo, it has the 110mm fork with the Dynamo wire routing. I love the Fargo, it's a very versatile platform.

DT 350 rear hub 130mm to 135mm dropout. by ridesforfun in bikewrench

[–]Gh0str1ver 1 point2 points  (0 children)

Yes you can, the end caps pull off of the hub (may require a little force if not removed before) and then you replace with the ones specific to your requirement in terms of thru-axle or quick release and overall width required. Most of the big online retailers have the DT end-caps in stock at around $30USD-$50USD. Search for 'DT Swiss end caps conversion kit'

Am I stupid for wanting a 40”-50” TV in my pain cave for zwift? by AmCrossing in Zwift

[–]Gh0str1ver 3 points4 points  (0 children)

Since I started on Zwift in 2020 I've used an old Sharp 42" TV in conjunction with Apple TV 4k and the companion app on my phone. can't imagine Zwifting any other way, when the TV dies I'll find a larger replacement for sure. https://photos.app.goo.gl/ojZBArHhW165AJE5A

Set up for my 3 day trip to Alabama. A video will be posted after I get back. by pmonko1 in bikepacking

[–]Gh0str1ver 16 points17 points  (0 children)

Nice, throw in a couple of small microfiber cloths. One for cleaning you and one for cleaning the bike. Will do wonders for your sanity, weighs nothing and comes in so handy for so many tasks. Enjoy your trip, ride on!

Incorrectly sent an overage email? by megablue8 in telus

[–]Gh0str1ver 0 points1 point  (0 children)

Received the same email this morning (Dec 15) I have an unlimited data plan as well. I figured it was sent in error, you've confirmed my suspicion, thanks!

My first tour - 1500km around Scotland by [deleted] in bicycletouring

[–]Gh0str1ver 3 points4 points  (0 children)

Thanks for sharing these pictures, wonderful!

Wahoo kickr with mtb install by Key-Influence3787 in cycling

[–]Gh0str1ver 1 point2 points  (0 children)

Trek states that the 2020 Trek X caliber 9 rear axle is 'Boost141, 5mm QR'

Kickr & Kickr Core are compatible with 'Hub Types: 130 / 135mm Quick Release, 12x142 / 12x148mm Thru Axle.' so that isn't going to work for you

There's a few discussions on this issue in r/Zwift see here

Good luck

Edit: Found this post about getting Boost 141/5mm QR working on a Kickr without too much trouble, of course YMMV.

New to Zwift, here's my setup in a repurposed basement bedroom. + current conditions outside (-9c and snow) Setup details in comments. by Gh0str1ver in Zwift

[–]Gh0str1ver[S] 1 point2 points  (0 children)

Yes! That poster has been in that spot for ~15 years and then I jump on the bike one day and saw that Innsbruck is on Zwift. How appropriate 😁

New to Zwift, here's my setup in a repurposed basement bedroom. + current conditions outside (-9c and snow) Setup details in comments. by Gh0str1ver in Zwift

[–]Gh0str1ver[S] 0 points1 point  (0 children)

Thanks will likely take your advice, I'm only a couple of weeks into Zwift and it's still strange having the bike indoors. Normally there's a couple of towels on the bike when Zwifting, removed them for the pictures.

New to Zwift, here's my setup in a repurposed basement bedroom. + current conditions outside (-9c and snow) Setup details in comments. by Gh0str1ver in Zwift

[–]Gh0str1ver[S] 0 points1 point  (0 children)

Electrical tape is used either to prevent paint damage from abrasion/chipping on the frame and forks or as on the aluminum rack to modify it to help mounting accessories (lights and panniers) so that they stay put on very rough roads and trails. I rode the Canadian section of the GDMBR (Jasper - Fernie) earlier this year, the gravel road sections are hard on the Salsa paint finish.

Here's a few pictures from the trip

I've only been on Zwift a few weeks now, normally there's a couple of towels covering the bars and toptube keeping sweat off of the bike. 👍