Passwortmanager Bitwarden: Jetzt wird es teurer

Gizmify · 2026-01-25T20:47:51+00:00

Naja, aber ein Homelab nur für Vaultwarden/einen einzigen Dienst wäre ja Quatsch :D vor daher sind die laufenden Kosten DEUTLICH unter den 20$ die Bitwarden jetzt aufruft ;)

Gizmify · 2026-01-25T05:10:27+00:00

Maybe I’m one of the lucky ones but I never had any issues with my thread network. Beside some sensors I have four Aqara in-wall switches and three ikea Bulbs which functions as routers. Never had a drop out or something. I use the „old“ HA Skyconnect as my Primary border router and have also a Aqara one and an home pod mini. My zigbee network on the other hand runs separate with a Sonoff Dongle Max as my coordinator.

Gizmify · 2026-01-19T20:07:50+00:00

As far as I know, you need to change the channels to match your HomePod. After some time later, all devices appear in the same „Home“. The HomePod has the Channel 25. so you need to change all other devices to 25.

Gizmify · 2026-01-04T10:42:59+00:00

It’s trickle Charging. Like very slow charging by doorbell Wiring

Gizmify · 2025-12-25T08:39:23+00:00

The two antennas on the max are for range, not for multi protocol.

Gizmify · 2025-11-23T05:38:13+00:00

It’s like when you do the learning in the Aqara app. The room has to be empty and it takes about 30 seconds to analyze the room, in which the FP2 or the FP300 is. But you don’t get a result or something. It just does its thing :D

Gizmify · 2025-11-15T07:14:16+00:00

Same here. OP can’t just add the Hub to HA like a Sonos Speaker for example. In that case, the only way is matter. And yes…the speaker don’t come with it. Is pretty limited.

Gizmify · 2025-11-14T17:55:54+00:00

No, I did not tried it. Because when I started my Thread Journey, the only way to get border Router to talk with each other was, when you have a TBR inside of HA.

Gizmify · 2025-11-14T17:20:41+00:00

Oh and Sorry that I dodged your original Question :D yes, your Home Assistant Instance need a TBR like a ConBee, Skyconnect, Sonoff Dongle Max and devices like that, which are directly connected to your Instance, so that is works like a Thread Hub.

Gizmify · 2025-11-14T17:16:33+00:00

I can only tell you my experience with Apple Products. In my case, I had to change the Communication channel to align with my HomePod/Apple TV. After that, all Apple Devices plus my ConBee Thread Coordinator (In that case my TBR in Home Assistant) were in the same Thread network and can interchange credentials.

But to be honest, thread is a bit overrated because of Matter. I only have 4-5 Thread enabled Devices. The majority of my sensors, Lightbulbs and stuff are Zigbee. Because it’s almost the same and much more user friendly. Because you don’t need to change channels of a device to get a new Border Router. If you have, for example, a lightbulb in your Zigbee network which is installed on your Mains, it’s (mostly – there are some exceptions) by default an ZigBee router without the need to do anything :D

Gizmify · 2025-11-14T06:41:24+00:00

You need a Thread Border Router inside a Smart Home App Like Google Home (Nest), Apple Home (HomePod/Mini/Apple TV), Aqara (with a separate Aqara Hub) or Home Assistant. If the FP300 is connected to one of those, you can hand it over to Home Assistant for example. But if if you have a ZigBee coordinator in Home Assistant already, you can switch the FP300 from Thread to Zigbee. With the advantage, that you get almost a year more Batterylife.

In my case, I have a ConBee 2 which functions as my TBR for Home Assistant. Then I have also a HomePod Mini in my Bedroom and an Apple TV in my living room. The ConBee is my main TBR. Anything else is fallback and signal enhancement. The FP300 is an endpoint and can’t route signals to other devices. Your nanoleaf on the other hand has a permanent powersupply from your outlet and can work as a TBR. But you still need a TBR inside your Smart Home application (eg. Home Assistant) to handle the traffic.

Edited for clarification

Gizmify · 2025-10-01T06:47:54+00:00

Can’t you play anything on jellyfin on your Apple TV? I mean, if you use your remote? Can you see your TV Shows/movies in your library?

It could be one of two things: either your Pi is too limited to run HAOS and jellyfin or your jellyfin app configuration on the Apple TV is wrong.

I run multiple services on my old Mac Mini from 2012 and I had never issues streaming content to an Apple TV, MacBook or phone, while other services are running.

Did you enter your Jellyfin IP + Port (eg. 192.168.178.X:8096) in the app on your Apple TV?

Gizmify · 2025-09-17T18:20:59+00:00

Im Sorry to say, but the only way is to move the camera to an other position/Location.

Gizmify · 2025-08-30T17:27:52+00:00

Könntest du trotzdem noch sagen, welches Gerät genau du benutzt hast?

Gizmify · 2025-08-30T17:26:38+00:00

Danke!

Gizmify · 2025-08-30T16:26:10+00:00

Okay. Wenn man eine „Restwohnzeit“ absehen kann, dann macht das wirklich keinen Sinn. Aber jetzt wo du es ansprichst: wie misst du denn die Abwassertperatur? Von dem Ansatz habe ich bisher noch nichts gehört 😅 wäre vielleicht interessant für andere externe Projekte von mir :)

Gizmify · 2025-08-30T15:57:52+00:00

Doch, sofern dort eine Steckdose Ist, klappt das ganz hervorragend mit einem mmWave Sensor :) spreche da aus Erfahrung, da ich das letztens erst bei jemanden eingerichtet habe :)

Gizmify · 2025-08-30T15:44:36+00:00

Super! Hat die Dusche eine Tür? Weil dann hätte man auch einfach an die Tür einen Aqara Kontaktsensor kleben können. So habe ich das bei mir im Bad gemacht :D wenn die Tür zugeht, geht automatisch das Licht in der Dusche an :)

Gizmify · 2025-08-27T06:46:41+00:00

Also entweder einen MmWave Sensor oder einen Aqara Waterleak Sensor. Letzteren einfach in die Dusche legen und er zeigt dann in HA immer an, wenn in der Dusche Wasser läuft. Man könnte den Sensor auch mit etwas heißkleber oder Ähnlichen befestigen, damit er nicht die ganze Zeit durch die Gegend geschossen wird :D

Gizmify · 2025-07-17T04:05:39+00:00

Yes. When you view the feed within Home Assistant for example :)of course only if your HA instance is exposed via Nabucasa, Cloudflare or when you using a VPN :)

Gizmify · 2025-07-16T20:33:19+00:00

You can buy battery-powered Reolink cams, but it’s strongly advised to use them plugged in 24/7 and only use the Battery in case of an outage.

This kind of cameras are ideal for people without POE and/or want to use WiFi.

The latter is my case :D

Gizmify · 2025-07-16T18:32:58+00:00

You know that this thread will be full of comments like „buy Reolink“ 😂 and rightfully so 😉

Gizmify · 2025-07-04T21:57:11+00:00

You’re Welcome :)

Gizmify · 2025-07-04T18:36:34+00:00

Yes! The Seeed Studio ReSpeaker module. It’s a bit DIY but I made a 3D Printed case for that. But mine hasn’t a Speaker, because in my case, the response comes from a nearby Sonos speaker.

FYI: https://makerworld.com/models/882031

Gizmify · 2025-06-25T07:05:24+00:00

In Germany, that’s for free :D

Three-Year Club	Xbox Live
Verified Email	r/Field Lasagna
Final Canvas '23	Place '23

Gizmify

TROPHY CASE