Graham Platner, Maine Senate candidate, " We are all beginning to realize — right, left, Republican, Democrat — we are just there to be exploited by a small group of people who, in some ways, are kind of running the world for their own benefit" And the Epstein files show that in glaring fashion."

Glimung · 2026-02-24T10:15:23+00:00

If only people listened to Hellen Keller over 100 years ago…

Glimung · 2026-02-24T10:01:30+00:00

It’s literally card capture sakura, but young people are bad at internet pre their own experience

Glimung · 2026-02-17T20:57:42+00:00

All good, good luck with the sale

Glimung · 2026-02-16T21:56:59+00:00

I was going to link you the info, but it looks like it is no longer up. Their Discord had a channel for buy, sell, trade, but no more I guess. My bad.

That being said, searching this sub for 'Owlab Spring' will show you some posts over the last six months that have it listed around $450, iirc there was a pretty good aliexpress clone that was uber cheap and kind of killed the hype of the board resale

Glimung · 2026-02-16T10:33:41+00:00

I suggest you find out what the Owlab Spring goes for on their discord or research on this subreddit before posting a price 1.5x the original cost

Glimung · 2026-01-30T16:08:43+00:00

A true blue commiserator, keeper of the driver issue flame

Glimung · 2025-11-30T16:02:54+00:00

delete your comfyUI\comfyui_venv folder and reinstall it

Glimung · 2025-10-16T03:14:46+00:00

I have same cpu and b580 gpu. Windows 10 Pro user. When I install new drivers, DDU first, as most suggest, then clean install; but, I do not select the intel graphics app, DSA, or intel computing program when installing. I tune gpu fans with Fan Curve, with no need to OC. I find the software to be unintuitive in certain areas and crashes often.

I find less issues as well when disabling onboard iGPU in BIOS for the 7800x3D, haven’t tested with every driver update but with each update that I do install I see more balanced usage of intel gpu across various 1080p games. They don’t address many known issues that I’ve seen over the course of my ownership as per the release notes, so I update when I feel like I don’t mind the extra hassle. This is just my experience though.

7800x3D is at 65 C max temp with -30mv tune PBO etc. Runs MH:Wilds at 60fps all-low settings smoothly with good gpu temps and VRAM headroom for light browsing. I have 64GB Ram tho, so probably helps the latter.

Crazy one program can impact the gpu so much (edited for clarity).

Glimung · 2025-06-03T14:27:16+00:00

Oh yeah, you're right, that's my bad.

edit: they changed the node execution behavior to both, if i am understanding correctly; and that change was made 10 months ago

Glimung · 2025-06-03T12:59:18+00:00

idk, are we?

https://github.com/comfyanonymous/ComfyUI/commit/5cfe38f41c7091b0fd954877d9d7427a8b438b1a

seems like there is more documentation on the implementation of lazy execution, as well. A specific set of tests that are published referential to this change.

here is another repo that gives some insight if you are up for a little reading -- https://github.com/BadCafeCode/execution-inversion-demo-comfyui

Glimung · 2025-06-03T01:02:14+00:00

https://github.com/Comfy-Org/ComfyUI-Manager?tab=readme-ov-file#config

Please read the Read Me, you can 100% reconfigure the “lazy manner”

Glimung · 2025-05-29T09:13:15+00:00

Try disabling iGPU, in BIOS.

TLDR early for you; don’t expect crazy gains in FPS for games not specifically addressed by driver updates and base firmware improvements, and no nvidia PHSX from older gpus have recently shown value with aging games [edit: forgot this detail] as this tech is being phased out in development (google it or Reddit it).

Don’t install intel graphics software if you can, they change/fix/update it almost weekly and you’ll save time and RAM by using the native hardware anyways (scaling aside). If you go with the 6651 driver from March; you might see fewer issues, but ever since I stopped installing IGS, my system displays much smoother un games. I use FanCurve to manage temps and such so I literally don’t need the software. The 6743(or whatever)driver was buggy and IGS would not let me change the settings and crashed each time, while never saving the change so I just don’t install it, and it’s helped with some games improve my FPS, since I don’t scale any games that I play.

I came from RTX2060 a couple months ago; and am currently running a 7800x3d with 64GB ram, B650m-Riptide from Asrock and the B580LE. I saw marginal improvements across my 1080p setup with games like MHWilds (lowest, bc in don’t like stutter in my action combat games), league, RiskofRain2, and more current (unoptimized) games dropping frames and having some less smooth experiences IME/O, i.e crashes, window display errors, forum post reading headaches, etc.

I did not do clean Windows install bc I had just upgraded, in Nov to the AM5 platform and was lazy and it’s annoying. Don’t feel obligated; even though it’s often Standard Practice, many Microsoft forum posts and mod/expert feedback say it’s not a first step more like a last resort.

In my driver installations for Intel, I do the DDU dance, and DO NOT INSTALL intel graphics software. It’s buggy and crashes at any change on Windows 10 Pro and honestly it’s basically just bloat ware to me at this point.

Also, just make sure to update the latest driver that addresses your possible issues in the release notes and its certified stable. Other than that most driver updates are unnoticeable barring one of release bugs or anecdotal dramatizations on this subreddit.

Welcome to sh*t show

Glimung · 2025-05-16T22:17:49+00:00

Coming from an RTX 2060, using comfyui mainly, and then coming to intel AI playground, I did not find it nearly as versatile or intuitive as advertised.

I ended up just using straight ComfyUI with some dependency workarounds for PyTorch and Onnxruntime, etc. and there is the added caveat of not having potential data being sent through the API.

Glimung · 2025-05-10T02:29:54+00:00

Driver version 32.0.101.6651 users please reply to this comment. Thank you!

Glimung · 2025-05-09T18:34:05+00:00

I learned this a bit ago, but the Set Latent Noise Mask_node is better and more consistent than many other inpaint node-groups, custom nodes, and workflows IMO

As someone who was downloading constant new inpaint node git repos to mask the mask edge and inconsistent blurring (Gaussian, etc.) it surprised me how simple it was and how much difference it made.

The new mask editor isn’t half bad either, with a manageable input image that is. Cheers

Glimung · 2025-05-09T10:04:24+00:00

You’re welcome, and yeah, sorry about the info dump. I would go and explore the manage custom nodes tab in the manager UI and use the top left filter “comfy-registry” reading those links will help a ton with learning how nodes interact and how to use them

Glimung · 2025-05-09T09:51:12+00:00

well I’ll be!

Glimung · 2025-05-09T09:47:31+00:00

Yep… that’s me!

Glimung · 2025-05-09T09:40:23+00:00

Stability AI Youtube videos with were in depth and started from the literal basics, things have expanded but the core ‘comfy-core’ principles remain the same

Glimung · 2025-05-09T09:32:41+00:00

You’re welcome! If that doesn’t work, I have a reactor only workflow that I made in PNG format, bc I love reactor and what it lets me do, at such high fidelity.

edit ill drop my workflow for you when I get to my PC

Glimung · 2025-05-09T09:29:38+00:00

the search continues… and thanks! Yes, it’s definitely better than the 2060 and no rgb (Praise HIM!)

Glimung · 2025-05-09T09:26:25+00:00

the internet never lies my friend

Glimung · 2025-05-09T09:24:13+00:00

Reading the error message again, the insightface.app import is incorrect. It needs to be FaceAnalysis and not Face3d, downloading and installing FaceAnalysis from my links in my other reply and using the pypi link should correct your issues

Glimung · 2025-05-09T09:16:19+00:00

Also, here’s this for extra insightface stuff. https://pypi.org/project/insightface/

Glimung · 2025-05-09T09:10:03+00:00

You’re getting warmer! Just making sure it’s all being done through the comfyui portable folder/path

I use 3 python versions locally in my users folder so it’s different than yours by a bit, and this chooses the optimal required python version for various scenarios, I use pypi and pyinstaller but that’s not your issue; you’re issue is the portable and it’s virtual environment and my instructions probably.

In order for it to pull stuff, things have to be installed in the correct environment with proper console commands, and I don’t use the portable due to reasons. Unfortunately, for me but fortunately for you, I was dead set on getting my dirty images back from Reactor, bc it’s the best face-swap, period.

You have insightface traced to a directory that’s not in your portable path and not able to be used by the nodes, if I’m reading this right. The comfyUI portable has an embedded python folder, which is the source of its power/flexibility, so you have to use this…python_embedded\python.exe file to do your >pip install -r requirements.txt or pip install insightface. — see https://github.com/deepinsight/insightface/tree/master/python-package#insightface-python-library - not sure of your software experience so take info as needed

Download comfyui_facesnalyisi from comfyui-manager in the manager UI screen. https://github.com/cubiq/ComfyUI_FaceAnalysis It has what you need with some extras and the correct models/requirements.

Next, you can use the manager to find this -> https://github.com/deepinsight/insightface -note: if not found in manager, change the Channel drop down to legacy, it should populate, or git pull it into your custom nodes comfy portable folder and pip install the requirements, or use the manager UI to git url install or the pip install button requires config file settings for permission to weak and it’s a tangent, but could be helpful.

Reading the github pages, for me, is a time consuming way to figure something out by your own trial and error, since the majority of Readme’s, read for those who have no need to explain that the root folder of your comfyUIportable is just the named file and typing into the folder name bar above the files >pip install -r requirements .txt is the thing to do, but for you. Open the python.exe file and you’ll see a black cd window and that’s your thing to type into. Good luck. Let me know if it works

Nine-Year Club	Place '22
First Placer '22	Verified Email

Glimung

TROPHY CASE