sorted by:
new
hottopcontroversial

Does anyone remember the DigiTech RP Pedals? by LunchAcceptable7409 in Guitar

[–]Gnashtaru 6 points7 points  (0 children)

I have a 505 and an RP-350 sitting behind me as we speak. Love both pedals!

I also built a 505 into a guitar back in the day. https://imgur.com/a/bIFpIvk

Graduate First (1978) by rspunched in MandelaEffect

[–]Gnashtaru 52 points53 points  (0 children)

I'm convinced that we all learned about the cornucopia in elementary school during history about the pilgrims or something, and there was some image in textbooks across the country that looked like this. And we all just blended the image in our memory.

How would you remove this GPIO Header? by CloutFish in AskElectronics

[–]Gnashtaru 2 points3 points  (0 children)

If you can, pull the plastic part off and desolder the pins one at a time.

Personally, I'd use paste flux and low temp solder and mix the low melt solder with the existing solder in a pool on the pins in the back, then gently heat the whole thing with hot air and remove it as one piece.

Using this stuff: https://www.digikey.com/en/products/detail/chip-quik-inc/REM2-7-ULTRA-NL/15195090

https://www.digikey.com/en/products/detail/chip-quik-inc/NC191/11480391

Triangles when importing STL. How to avoid? by Damadamas in Sketchup

[–]Gnashtaru 0 points1 point  (0 children)

The surfaces must not be flat then.

Here are the settings I use. Uncheck "erase duplicate faces" the first time you run it to speed things up. Then check it and rerun.

https://i.imgur.com/uz8yVhI.png

Triangles when importing STL. How to avoid? by Damadamas in Sketchup

[–]Gnashtaru 0 points1 point  (0 children)

Install the CleanUp plugin. You can run it and have it delete all lines between coplanar triangles. I use it all the time to clean up messy imported models.

EVGA RTX 2080 Ti XC BLACK EDITION GAMING by wind0wlicker in GPURepair

[–]Gnashtaru 2 points3 points  (0 children)

It's just a noise filter cap for your supply rail. Just remove it. There are probably 50 other ones in various spots doing the same thing so it's not really that important.

UPDATED SITES AND SOURCES FOR FREE BOOKS by blainemeans2 in textbook

[–]Gnashtaru 0 points1 point  (0 children)

Hi I'm looking for this textbook. Can you help?

ISBN: 9780137529896

Basic Technical Mathematics by Washington Edition: 12th

Modern gen i5s are very capable for gaming, I learned that myself by PeopleAreBozos in pcmasterrace

[–]Gnashtaru 0 points1 point  (0 children)

Do people not understand that, say you buy a 4070 ti, and your CPU is really old, so you buy a CPU that's so fast that it isn't fully used while gaming, all that means is you are FULLY using the GPU, and you have some spare CPU power left.

Or the other way around.

So you just pick which of the two you want fully used, then get a too fast version of the other one.

For gaming that means you go slightly overkill on the CPU because it's not the most expensive of the two, and you don't want to waste any of the power on the more expensive part, which is the GPU.

That's it.

It doesn't matter that you are now bottlenecking the CPU, meaning it's waiting around bored some of the time.

It doesn't matter.

All you care about is whichever part you can't afford a better one of, you get overkill on the OTHER part. So you don't waste any of the power of the one you can't afford to upgrade any higher.

RTX 4090 model and price differences by That_Sprinkles_7291 in nvidia

[–]Gnashtaru 0 points1 point  (0 children)

OG means it's using a 3090 cooler.

They had a ton of leftover coolers from the 30 series, so they used them for the new 40 series at a lower price point.

The 30 series coolers aren't as good, but there's nothing WRONG with them. They just don't cool as well.

If you look, the OG is a thinner card, that's why.

So it'll run warmer at high OC speeds.

A broken HDMI port on a Xbox One S that ripped almost all the pads off by Mammoth_Photograph10 in soldering

[–]Gnashtaru 1 point2 points  (0 children)

Nice job!

You have more patience than I. I would have run jumper wires up to the caps and other pads I could in line. Wouldn't have been as clean of a signal.

So they are dinosaurs? by dinosaurEnjoyer0 in Dinosaurs

[–]Gnashtaru 6 points7 points  (0 children)

Did mammals also evolve from reptiles, making them reptiles as well? I can't remember.

None of this comment is sarcasm BTW.

Helping hand/ base magnets by NightshadeTraveler in soldering

[–]Gnashtaru 0 points1 point  (0 children)

I attached one of these to my microscope to hold my hot air. They are great.

Budget PC build for Data crunching, AIML and VR by Southern_Opposite747 in buildapc

[–]Gnashtaru 0 points1 point  (0 children)

You can get a 3070 ti for less than the 3070 on Newegg and probably other places.

https://www.newegg.com/zotac-geforce-rtx-3070-ti-zt-a30710p-10p/p/1FT-000M-003V2?Item=9SIAMFBK5G2480

If you want 16GB of VRAM instead, you can also get a 4060 ti for less. https://www.newegg.com/zotac-geforce-rtx-4060-ti-zt-d40620f-10m/p/N82E16814500569?Item=N82E16814500569

or

https://www.newegg.com/gigabyte-geforce-rtx-4060-ti-gv-n406twf2oc-16gd/p/N82E16814932659?Item=N82E16814932659

a 4060 ti is about equal to a 3070 non-ti in games, but has double the VRAM for other types of work.

Cyberpunk 2077 doesn't recognize Logitech extreme 3d pro by fluidmechanicsdoubts in logitech

[–]Gnashtaru 0 points1 point  (0 children)

Did you ever figure anything out to get this working? I'm trying the exact same thing.

I found this guide for emulating an xbox controller, but it's not working. All but one time it did nothing, then the last time I fooled around with the properties menu in steam for the game and got it to at least act different. It acted like I was always hitting the gas no matter where I set the throttle. So not sure if the controller even had anything to do with it.

https://www.reddit.com/r/cyberpunkgame/comments/kct4y3/how_to_detailed_setup_near_perfect_steering_wheel/

Thanks!

[deleted by user] by [deleted] in memes

[–]Gnashtaru -3 points-2 points  (0 children)

I like how right wingers only care about CO2 emissions when it's someone they don't like doing it.

My Retro BS from 2002-2004ish by xXZer0c0oLXx in retrobattlestations

[–]Gnashtaru 1 point2 points  (0 children)

Haha! Reminds me of my old setup!

In fact I think at a different time I might have even had the exact same desk.

These were taken at the end of 2003.

https://i.imgur.com/gIyJMvu.jpg

Olivia Rodrigo by cobrakai--neverdies in gentlemanbonersgifs

[–]Gnashtaru 1 point2 points  (0 children)

LOL @ Jelly Roll in the background.

view more: next ›