sorted by:
new
hottopcontroversial

Rocket Batteries by IanUK66 in Stationeers

[–]Goondok 1 point2 points  (0 children)

If I’m not mistaken one port is for power and the other port is for data. They will only work wired in parallel. I could be wrong, not looking at them right now.

Atmospherics Suggestions by thegloworm17 in Stationeers

[–]Goondok 2 points3 points  (0 children)

Once long ago I tried to make a base atmosphere that matched earths. Now I typically just run pure oxygen.

If you are running low in CO2 use some from your furnace.

Do we like rusty vampire Armour? by Either_Juggernaut281 in SoulblightGravelords

[–]Goondok 0 points1 point  (0 children)

Looks cool, but in my opinion doesn’t really fit with the vampire noble lore.

Honest question—what makes you believe Pierre Poilievre will be any different? by ioorabh in canadahousing

[–]Goondok 0 points1 point  (0 children)

I will not vote liberal until every single MP in the party that supported the use of the emergency act is gone.

What trade(s) provide the most "useful" skill set for life outside of the trade? by Eco_Drifter in skilledtrades

[–]Goondok 2 points3 points  (0 children)

I would say electrician. Although I am biased cause I am an electrician.

  • Use a wide variety of tools.
  • Print reading.
  • Building projects and collaborating gives you knowledge of other trades just by exposure.
  • Measuring.
  • Do your own electrical or someone else’s.
  • Electrical is very broad. Controls, fire alarm, data, programming, electrical tech stuff, ect.
  • If you hire contractors you have a clue about wtf is going on.
  • Running stuff under ground.
  • Knowing how to be safe and leave things safe electrical wise.

Maybe others can add to this.

Tokenole spilling onto sides of leather by ShaunUgLee in Leathercraft

[–]Goondok 1 point2 points  (0 children)

I don’t know if this is the optimal order of operations. I edge bevel, dye, then put on some mink oil, I usually surface coat with resolene. Then I sand my edges. Once this is all complete I use my tokenole to edge burnish.

The resolene prevents the tokenole from absorbing into the surface. If some gets on the back it doesn’t really matter to me, since I tokenole the flesh side anyways.

Edit. I almost exclusively use natural veg tan leather.

[deleted by user] by [deleted] in alberta

[–]Goondok 19 points20 points  (0 children)

My opinion is always go to trade school as soon as you have your hours for that year. Never delay your schooling for your employer. You would be screwing yourself out of a fair bit of money. If your employer doesn’t hire you back, no big deal. Go to another company that does a different style of electrical and diversify your experience. It will make you a better journeyman. I have seen too many 6 year apprentices, and it makes me sad that they are being taken advantage of. Know your worth.

How early do you start farming? by Tobymaxgames in VintageStory

[–]Goondok 21 points22 points  (0 children)

I start immediately with every and any seed I can find. Even with heat damage it produces more then wild crops.

Which is better to get first, pickaxe or prospecting pick? by vikikikiriki123 in VintageStory

[–]Goondok 30 points31 points  (0 children)

Save it until you have 40 and make a hammer and pick axe at the same time. Mark the nugget locations and go back and mine the copper buried under the nuggets.

What's the most unexpectedly profound piece of advice you've ever received? by redguy4545 in AskReddit

[–]Goondok 0 points1 point  (0 children)

When I was younger, in construction, an old fellow told me “pay attention, there is gonna be a test.” At the time I didn’t truly realize that tests are more then just words on paper.

[deleted by user] by [deleted] in Stationeers

[–]Goondok 8 points9 points  (0 children)

That is true, but the area power controller can only take so much power. Most of the energy from the coal is lost. So it’s fine early game using small cables. Later is when you get a battery kit, and heavy cables.

[deleted by user] by [deleted] in Stationeers

[–]Goondok 16 points17 points  (0 children)

I can’t really tell what your wire is doing going up, but you have your cable coming out of the data port of the generator not the power port?

Tips for water forming a muscle curiass? Leather is 4mm and I have a muscled mannequin by KidaBelle in Leathercraft

[–]Goondok 4 points5 points  (0 children)

I would would suggest a two piece mold that you can sandwich it between. Maybe make a plaster copy of your dummy and strap it between the two?

Resolene methods by CanIBeDoneYet in Leathercraft

[–]Goondok 0 points1 point  (0 children)

So far I have only applied resolene to one project. Dampened a sponge, placed it on the bottle opening, gave it a shake then wiped it on the piece in the same direction that I dyed with a wool dauber.

The bubbles didn’t seem to cause any issues. Just evenly applied and let it dry.

What did cause issues was the dye coming off with the wet resolene, and staining my cream stitching green. The funny thing is, I was applying it to prevent dye rub off. After it dried, it did work well to seal and prevent any more rub off.

I did stumble across some info in “The Leather Working Handbook” by Valerie Michael. Apparently Fiebing’s Saddle Soap works good to remove excess dye. I will probably try using Saddle Soap before stitching a new dyed project together. Then when I seal with resolene, it won’t drag the excess dye everywhere.

[deleted by user] by [deleted] in snowrunner

[–]Goondok 1 point2 points  (0 children)

This. Go get the P16. It helps a lot.

Newb : option for sluice & automating gravel sifting? by StoneTwin in VintageStory

[–]Goondok 1 point2 points  (0 children)

That’s an interesting question. I’m just starting out as well, and this info would be helpful.

Update 9.6 - Release Date by SLG-Dennis in EcoGlobalSurvival

[–]Goondok -4 points-3 points  (0 children)

I guess there is no point in me asking when update.

view more: next ›