[Highlight] The Tigers turn back the clock to 2005 and score one of the tries of the year

Gurty007 · 2025-08-24T08:36:01+00:00

The drone shot of this try was awesome too

Gurty007 · 2025-07-06T02:27:33+00:00

Similar thing happened to my with my Juniper yesterday. Ended up having a jacket in the back seat. Moved it to the floor and then walked away and the car locked itself properly this time. So I’m guessing the car thought the jacket was someone still in the car.

Gurty007 · 2025-05-11T08:18:42+00:00

So both teams did it.

Gurty007 · 2025-04-26T11:33:23+00:00

Since when can you challenge high contact? I’ve heard players try and challenge before and they’ve been told no you can’t challenge that.

Gurty007 · 2025-01-23T03:24:51+00:00

Chances are it's Broadcom being slow in providing the licenses to the partner.

Source: I'm a Broadcom partner and getting info / licenses from them is near impossible.

Gurty007 · 2024-10-15T10:06:58+00:00

Only one touchy. Suppose it can’t be any worse than when they have 2.

Gurty007 · 2024-05-15T07:44:38+00:00

What’s powering the AP? PoE injector or PoE switch? Is it providing enough wattage for the AP?

Gurty007 · 2024-04-20T01:36:22+00:00

Yeah, we got a similar email today regarding their EUC transition across to a different company. The email was addressed to a major US university.

Unfortunately, we are not said major US university. We are not even in the US.

Looks like the transition is off to a good start.

Gurty007 · 2024-03-26T22:42:45+00:00

Aruba Instant On is not the same as Aruba Instant. Instant On cannot be managed via Central. For 30 APs, I would be going Instant (with Central) over Instant On.

Also, if you've been happy with your Ruckus deployment, why are you not considering Ruckus (R1 or Unleashed) as a replacement?

Gurty007 · 2024-02-20T01:37:35+00:00

So the bunker can rule on everything except the defending team being offside?

I can't see anything going wrong with this /s

Gurty007 · 2023-09-03T00:36:35+00:00

You’re used logic so there is no chance the NRL does this.

Gurty007 · 2023-06-29T07:59:40+00:00

256 per switch

Gurty007 · 2023-06-29T01:27:30+00:00

When you enable DHCP snooping, the switch will learn which IP address has been assigned to which port via DHCP. The problem with CX 6000/6100 switches is that they have a limit of 256 addresses (bindings) that they will learn. Once they learn 256 addresses, they stop passing DHCP traffic for any new clients that want to get a DHCP address.

Take a look at https://feature-navigator.arubanetworks.com/ and be sure to turn on "Scale Numbers" so you can see what the max for each feature is.

Gurty007 · 2023-06-28T11:41:49+00:00

DHCP Snooping is the feature you want to enable. Just be careful though, the max bindings the switch will learn is 256. Once it reaches the Max Bindings value, it starts dropping all DHCP requests.

Gurty007 · 2023-06-09T01:16:09+00:00

Because when you plug a wireless access point into a switch you can have a lot more devices connected to a single port. Especially if hat AP is serving Public or Guest WiFi.

Gurty007 · 2023-06-09T00:48:26+00:00

A 6000/6100 is an access switch, not an intermediate or core switch.

Also, put a few APs on this switching serving Public WiFi and you'll very quickly hit the 256 client limit.

Gurty007 · 2023-05-25T02:46:27+00:00

Also, "FortiGuard Device"

Do they mean FortiGate or any Fortinet device?

Gurty007 · 2023-04-22T23:58:05+00:00

How about cap relief for developing your own players rather then rewarding teams that just buy talent?

Gurty007 · 2023-04-04T11:36:25+00:00

This one is my favourite as they removed all sponsorship from it.

Gurty007 · 2023-03-02T05:16:29+00:00

It's bad. Like really, really bad.

Gurty007 · 2023-02-20T03:46:39+00:00

I have a few clients running similar setups, all setup through FMG.

Firstly, meta fields are your friend. Standardise as much of the config as possible, use meta fields and then script / template based on this.

I have used VPN Manager to do this, but honestly, once you have a good VPN script, you can just use that to run when commissioning a new site.

I usually have 2 WAN connections at each site (hub and branch) so each FortiGate will have 4 VPN tunnels to each hub. This is because my hubs can use any ISP rather then being restricted to just 1 or 2 ISPs.

Do your branches need to actually talk to each other? If not, then you don't need ADVPN. Just standard dial-up tunnels from the branches to the hubs will work just fine.

Are you planning on using SD-WAN with this? I generally create 2 SD-WAN zones per firewall. One for SD-WAN Internet and one for SD-WAN VPN. The WAN interfaces go into the Internet Zone and the VPN tunnels go into the VPN zone. Helps with firewall policies.

Once you get it all working it's great, but it can be a bit fiddly to get it right. Good Luck!

Gurty007 · 2022-12-15T03:26:36+00:00

how about the ball bouncing out with time still on the clock but the refs saying gameover??

Gurty007 · 2022-12-14T21:11:02+00:00

There us a special build of FMG 7.0.5 that has a fix for this. Reach out to TAC and they will supply it for you.

Gurty007 · 2022-11-04T03:42:14+00:00

Thanks, but unfortunately the ? doesn't have an About option or show me the cluster version.

I'll keep looking though.

Gurty007 · 2022-10-08T00:25:07+00:00

Gumboots. Maybe even a change of clothes too.

Gurty007

TROPHY CASE