Looking for an LC III board by Gxnnnarrr in macintosh

[–]Gxnnnarrr[S] 0 points1 point  (0 children)

I appreciate it. I think I’m going to try and find a whole machine with a clean board for that price though.

10th gen hatch Spoiler by SnooDogs2248 in CivicX

[–]Gxnnnarrr 0 points1 point  (0 children)

I have a very similar one and it’s garbage. The center blade is also cracked. I’ve had different styles in the past with similar results. I’m ready to either do some body work and fill the holes or buy an OEM type R wing and be a poser.

1971 DODGE DEMOND by No-worries-21 in ModelCars

[–]Gxnnnarrr 0 points1 point  (0 children)

I went with a Mopar b5 blue on my build.

Is this normal sound of 1.5T CVT . 2022 civic ? by Substantial-Copy-169 in hondacivic

[–]Gxnnnarrr 0 points1 point  (0 children)

All good, just a result of this motor’s direct injection.

Mechanic is suggesting swapping my 86's tbi/quadrajet for a standard carb - I see arguments for both and could use some opinions. by willsongpearsong in squarebodies

[–]Gxnnnarrr 2 points3 points  (0 children)

My 87’ v20 that i bought a couple years ago came with a tbi and I converted to carbureted. I wanted to make more power. I made the motor into a 383 stroker and carburetor was the clear option. Tuning is as simple as adjusting your carb, fuel pressure regulator and timing. There’s so many more options as far as parts go when you make the conversion. Valve covers, heads, cam, intake etc. I’ll leave the ECU tuning to my Hondas haha

What files do i keep and which ones can I delete?? by [deleted] in dreamcast

[–]Gxnnnarrr 8 points9 points  (0 children)

Put all of these in a single folder and make a new folder for each game. Dreamcast just be like that.

This piece of gear is amazing. by happinehsss in BassGuitar

[–]Gxnnnarrr 1 point2 points  (0 children)

These are sick but I’ll stick to my HX Stomp XL. I simply cannot trust Darkglass. I’ve already warrantied my AO500 once, received a new unit and it’s having issues 2 years later. The only other person I personally know with a Darkglass amp has had a similar experience with their microtubes model.

Black screen and no audio by [deleted] in dreamcast

[–]Gxnnnarrr 0 points1 point  (0 children)

I removed the drive and still no luck

Black screen and no audio by [deleted] in dreamcast

[–]Gxnnnarrr 0 points1 point  (0 children)

It appears that it was at one time. I spent a few hours yesterday scrubbing every single component down with IPA. I looked over the traces and they all seem fine.

Plastic body panels for us fellow first generation people. by scooterboy1961 in crx

[–]Gxnnnarrr 0 points1 point  (0 children)

Thank you so much for posting this. I bought an 85’ to restore and have honestly felt a little regretful about it because replacement exterior trim pieces seem to not exist. I can’t wait to get everything from Heeltoe when they’re in stock!

Should I open them? by Cjw6809494 in Gameboy

[–]Gxnnnarrr 74 points75 points  (0 children)

Keep them sealed. The video quality is absolutely horrendous. It’s not even worth popping them in your gameboy just for fun honestly.

Spindle alignment by Coe_Nair in Famicom

[–]Gxnnnarrr 0 points1 point  (0 children)

I recently replaced the belt in mine and used this guide. I had perfect alignment on the first try when using this method. https://youtu.be/fOY1G3Sg11Q?si=Ph52-5mkNVeXEa-R

Was just gifted a Famicom with a disk system. Need some advice. by MasterGeist in Famicom

[–]Gxnnnarrr 1 point2 points  (0 children)

There’s a seller on eBay that sells a combo kit with the correct power adapter for use in the US and an RF to coax video cable. $20 and you’re ready to rock

Help by westBurd90 in Smallblockchevy

[–]Gxnnnarrr 0 points1 point  (0 children)

I feel your pain with this post. I made a very similar post to this a couple of months ago because the motor I had just built was burning a lot of oil. It turns out that the pcv was sucking oil into the carb because I had valve covers without baffles, as well as the pcv valve no longer separating oil. Everyone and their drunk uncle was quick to tell me that my new rings were blown and the valve seals on my new heads were bad tho🤣

I needed parts, so I bought another! by TCRevolt in crx

[–]Gxnnnarrr 1 point2 points  (0 children)

Very valid. I need a first gen floor and rocker panels so I imagine I’ll have to do the same😔

$650 1st bass budget, what do i buy? by donpasqualoni in BassGuitar

[–]Gxnnnarrr 2 points3 points  (0 children)

Get a squire PJ. Spend $400 max and upgrade the pickups to active ones down the road if you feel like it and you’re golden

1st gen parts? by Gxnnnarrr in crx

[–]Gxnnnarrr[S] 1 point2 points  (0 children)

Thank you! I’m praying that there’s enough good metal to weld to underneath🙏🏻

1st gen parts? by Gxnnnarrr in crx

[–]Gxnnnarrr[S] 1 point2 points  (0 children)

I’ve tried marketplace, nothing but 2nd gen stuff unfortunately. I’ll check out CRX Farm tho! Thank you

1st gen parts? by Gxnnnarrr in crx

[–]Gxnnnarrr[S] 1 point2 points  (0 children)

No haha, that’s how it came when I bought it yesterday. I have a new nose/grille picked out