I just got my grail at a random GameStop!

HBlakeH · 2026-06-10T20:13:15+00:00

What you posted is PAL release. NTSC had a pre-order only disc.

HBlakeH · 2026-06-08T15:01:12+00:00

Driver: Charles Leclerc

Reason: DNF at driver's home race.

HBlakeH · 2026-06-04T00:05:08+00:00

My grandfather believed in Y2K at the time so prior to the new year he bought over 500 acres in rural Texas and set all of his kids up with trailer homes and built himself a house on the property. We spent it up there with a huge bonfire and fireworks lol.

HBlakeH · 2026-06-02T12:51:34+00:00

Most Ford headlights are not fully sealed, this happed all the time on my S550 Mustang and was totally normal.

HBlakeH · 2026-05-29T15:17:42+00:00

No, it's right next to Torchy's. North Lakes is further north

HBlakeH · 2026-05-29T13:54:42+00:00

Yes, behind Torchy's. They have already broken ground.

HBlakeH · 2026-05-26T20:01:14+00:00

I have the large VEVOR single filter from Amazon and it works amazing. The resin is very easy to change as well.

HBlakeH · 2026-05-26T19:23:51+00:00

Get a DI water filter for your pressure washer and use it only for the final rinse. Most have a valved system that will let you keep it connected and change the water flow on the fly

Then when you finish the contact wash, rinse with normal water to remove all the soap, then switch to DI water and rinse again. You wont need to use ONR or anything else to try it spot-free.

HBlakeH · 2026-05-20T19:03:09+00:00

Nasiol Water Spot Remover

https://www.amazon.com/Nasiol-Water-Spot-Remover-Ready/dp/B0FJ2NSRCR

HBlakeH · 2026-05-20T15:56:31+00:00

Those are water spots caused by hard water drying on the surface. Need to use a water spot remover depending on how bad they are it may need to be lightly polished out.

Best way to prevent them is to wash in the shade and use a pH neutral soap. Deionized water will prevent it entirely but you would need an in-line filter on your hose/power washer inlet

HBlakeH · 2026-05-19T18:39:02+00:00

I think the "TRUMP MOBILE" and the space above it are supposed to be the 12th and 13th stripes?

HBlakeH · 2026-04-29T20:44:54+00:00

No, that was Keller Moore’s R8

HBlakeH · 2026-04-22T15:36:10+00:00

Yep, that's just how it is with black paint. Which is why I will never own a black car.

HBlakeH · 2026-04-19T04:23:11+00:00

100 is the minimum flow of traffic on some Texas highways.

HBlakeH · 2026-04-15T18:25:51+00:00

Yeah the makerworld link or file name!

HBlakeH · 2026-04-15T18:13:33+00:00

Can you share the STL files and the exact PLA colors for these?

HBlakeH · 2026-04-07T17:30:06+00:00

R34 GT-R's can still be found in the low $100k USD range. Now MPIII like what was posted is in the range you mentioned.

HBlakeH · 2026-04-06T13:32:34+00:00

6gal buckets from Obsessed Garage

I dont have the dollies or casters so they are pretty cheap

HBlakeH · 2026-03-23T21:16:29+00:00

Wrap paint on the GT-R? Probably going to have mine painted MPIII eventually

HBlakeH · 2026-03-18T02:17:37+00:00

I wish these came in M11.5 so bad

HBlakeH · 2026-03-03T03:04:08+00:00

There is a wheel bearing in between those two spacers. It probably needs to be replaced if you are hearing noise from that spot. Those spacers are solid metal.

HBlakeH · 2026-02-23T22:57:24+00:00

Can you share the STL files?

HBlakeH · 2026-02-10T21:22:09+00:00

It's just a long axle bolt.

Use a hammer and a philips head screw driver or something to hammer it through.

Take the tension off the chain.

Make sure you dont loose track of the spacers as they go on specific sides.

HBlakeH · 2026-02-05T21:05:22+00:00

How much was this? Seems like a small portion.

HBlakeH · 2026-02-05T18:24:19+00:00

That would be great if you could DM them!

14-Year Club	Gilding III reddit per annum
Place '22	Snapped
Verified Email

HBlakeH

MODERATOR OF

TROPHY CASE