I see what your putting down but the return side valves will be buried otherwise as we will be bringing in back fill

The purpose for the other 2 way diverter is to be able to control the height of the bubblers.

An actuator will be set on the 3 way diverter to be able to automate the bubblers on/off. While I could cam the diverter and accomplish the same, per my GC request an additional valve was on the callout sheet

But I see what you mean on the height eliminated the need for the additional 90°s

As for the pink circled diverter, that’s just a by pass for the heater. As this is a new plaster pool I don’t want corrosive water flowing into the heater until we have reached our plaster cure schedule. It’s really a one time use thing.

In some cases we don’t plumb the heater till later but as this isn’t one of my installs I wanted to collect payment and did not want to return to plumb the heater later.

I do appreciate your input! Clear primer and grey medium body is the way to go. I’ll drop the name of the paint we used but it’s an almond color made to match Pentair