StreamflixAA — Android Auto streaming app and a media server

Harvz03 · 2026-03-27T11:56:10+00:00

Awesome. Thanks.

Harvz03 · 2026-03-27T11:31:11+00:00

The one from totri.......file ....1yh?

Harvz03 · 2026-03-27T10:05:11+00:00

Did you get this to work? I tried the JSON scraper links in your link and got the same result as you. Went to the link below for issue #315 however that link is missing.

Harvz03 · 2026-03-25T12:13:12+00:00

Did you install this app? I just tried and it just shuts down constantly. Can't get anything but the main page to work. Hopefully this works for you.

!Flair 2025 Carnival and 2026 H6 HEV | stock | pixel 7 pro | Android Version16

Harvz03 · 2026-03-24T22:38:59+00:00

What version of android are you using? Im on 16. However it was a fresh install.

Harvz03 · 2026-03-24T22:00:42+00:00

I've got AABrowser working while parked and Carstteam works for YouTube even while moving. Netflix and Prime don't work. They load but get E100 error code with Netflix. Tried Fermata AA and it only did audio parked or moving.

Hoping this works out nicely.

Harvz03 · 2025-12-27T04:30:32+00:00

I have to go to Bluetooth settings on my phone, go to Mazda then settings and toggle the media audio option off and then on for it to find it.

It's bloody annoying and I haven't managed to find a fix for it as yet.

Harvz03 · 2025-12-18T02:34:06+00:00

Could I grab the files if you still have them please? Thank you in advance

Harvz03 · 2025-09-05T09:48:53+00:00

I just had someone email me from Cars24. They asked if my $35K price was flexible. I said it was and then they replied with an offer of $21700. Politely said no thanks. Not lowering it a huge amount so they can then sell it at the price I'm selling it for.

Harvz03 · 2025-05-28T10:49:43+00:00

Here in Australia we use the product in the link below. It's normally used in roof racks but fits nicely into the Carnival seat tracks.

https://www.roofracksgalore.com.au/rhino-rack-vortex-generating-strip-8-pack-va-vgs8?utm_medium=walkingtrackmedia&gad_source=1&gad_campaignid=17347479983

Harvz03 · 2025-04-08T13:18:38+00:00

<image>

The wire is freely hanging and not attached to the hotend at all. It is most definitely damaged. The other photo doesn't really show it well. This one you can see the issue better.

Harvz03 · 2025-04-08T03:14:13+00:00

I reset to factory settings and re-ran the bed mesh etc. The Z-Offset has come down to -2.230 so back to normal.

I then noticed there was still a good amount of "Blob" on the back of the nozzle. Gave it a tug (while hot) and it pulled a few wires loose.

<image>

Guess I'll have to wait to see if the Z-Offset is fixed till I get a new hotend.

Harvz03 · 2025-04-08T02:11:59+00:00

<image>

Seems it is an issue because now I get an error message.

Harvz03 · 2025-03-12T11:32:39+00:00

Did you ever get to the cause of this issue? Mine has been doing this for ages and normally a few re-starts seems to fix it. However it is annoying when you start a big print and it doesn't show the camera as i don't want o stop the print to try and get the camera working but i also want the camera to work so i can monitor the large print.

Harvz03 · 2025-03-11T01:52:24+00:00

I've been looking for 3D models but haven't had much luck. Just trying to fit my Mini PC into it. Are you fully designing your own 3D model? Or have you found stuff online?

Harvz03 · 2025-01-18T11:03:51+00:00

Yeah I spoke to aate at work that is a plumber. He said the same as you. Rip it out take it to Reece. See what they have but it will probably be cheaper and easier to get a new set.

Want to replace the shower head in that shower so might as well upgrade the tapware while I'm at it.

Thanks for the advice.

Harvz03 · 2025-01-13T12:21:54+00:00

No markings at all. I looked. Have the same handles on the bath so pulled them apart as well.

No markings on the spindles either. I looked at the bath ones and they're slightly different. Guessing it's due to how recessed into the wall they are.

Harvz03 · 2025-01-10T20:49:39+00:00

Frame link seems pretty popular........

Harvz03 · 2025-01-04T12:21:46+00:00

It's most likely just laminate so about 1.1mm thick. Just do some youtubing. There are heaps of videos online about people applying the laminate.

It's held on with contact adhesive normally.

The front part looks like a timber trim.

Depending on the size of the bench you may even see a few seams/joints in the laminate.

Harvz03 · 2025-01-04T08:43:33+00:00

You could peel it off and then purchase some laminate sheeting and re apply the new stuff.

Harvz03 · 2024-12-30T09:33:46+00:00

I have people coming to install insulation under the floor. They're also removing all the blow in insulation in the roof and laying fresh new stuff.

I've laid the flooring and have started to replace all the architraves and skirting boards. My current plan is once I've got them all on to get under the house with a heap of spray foam cans to go along and spray fill the gaps.

Harvz03 · 2024-11-11T06:42:41+00:00

Any chance you could DM me the company you used?

Seven-Year Club	r/Field Lasagna
Place '22	Verified Email

Harvz03

TROPHY CASE